Refine search
Results 1-10 of 3,665
Removal of Benzyl butyl phthalate by Polyetheretherketone/polyvinylalcohol nanocomposite Modified with Zinc oxide nanoparticles Adsorbent from Wastewater
2024
Cheraghi, Reza | Abrishamkar, Maryam | Jalali Jahromi, Hossein | Hoseini, Farzaneh
The applicability of Polyetheretherketone/polyvinylalcohol nanocomposite modified with zinc oxide nanoparticles synthesis for the removal of benzyl butyl phthalate from wastewater. Identical techniques, including BET, FT-IR, XRD, and SEM, have to characterize this unknown material. The investigation shows the applicability of adsorbent PEEK/PVA/ZnONPs, as an available, suitable, and low-cost adsorbent for adequately removing the benzyl butyl phthalate from wastewater. The impacts of variables, including benzyl butyl phthalate concentration, adsorbent, pH, and time (15 mgL-1, 0.3 g, 5.0, and 60 min). Based on the received data, the adsorption of benzyl butyl phthalate on the PEEK/PVA/ZnONPs adsorbent agrees well with the Langmuir adsorption model isotherm (qm = 34.24 mgg-1). The results of the thermodynamic parameter showed a negative enthalpy (-77.0 KJ/mol), a negative Gibbs free energy (-11.7 KJ/mol), and negative entropy (-274.0 J/K.mol). This led to the conclusion that the adsorption process is energetically possible, and exothermic was also spontaneous. This work indicates that the PEEK/PVA/ZnONPs, used as an ecologically adapted, adsorbent holds promise for eliminating benzyl butyl phthalate from wastewater.
Show more [+] Less [-]Mechanisms of Trace Metal Elements Removal from Water using Low-Cost Biochar Adsorbents: A mini review
2024
Srivastav, Arun Lal | Rani, Lata | Sharda, Prakriti | Sharma, Ajay
Trace metal elements are toxic to the environment and human health and can be removed from water through adsorption. Development of low-cost adsorbents would always been a matter of achievement of every adsorption study as usually many adsorbents were found to be expensive in nature. In this regard, biochar adsorbents gained significant attention due to high adsorption capacity, low-cost and environmental sustainability. Pyrolysis is used to produce biochar adsorbents at varying temperature ranged from 300°C-700°C. The adsorption capacities of palm fiber biochar adsorbents are remarkable which was found around ~198 mg/g for cadmium removal. However, bamboo-based biochar had 868 mg/g of adsorption capacity for arsenate removal. This review aims to provide the current discusses the sources and impacts of trace metal elements in water along with properties of biochar including its composition, surface area, pore structure, and surface functional groups. Further, various types of biomasses have also been mentioned for producing biochar such as agricultural wastes, food wastes, forestry residues, etc. The paper also discusses the different types of mechanisms involved in the adsorption of heavy metal biochar adsorbents like electrostatic attraction, ion exchange, surface complexation etc.
Show more [+] Less [-]Removal of Cd(II) Ions from Aqueous Solutions using adsorption By Bentonite Clay and Study the Adsorption Thermodynamics
2023
Hamood, Ahmed | Mohammed, Inas | Majeed, Ahmed
cadmium usually enter the environment and water resources through wastewater, released by various industries, and may have adverse effects. The current study employs surface of bentonite clay available locally in order to remove cadmium In solutions contaminated with this type of ions, in order to research on a surface with a high ability to adsorption of cadmium (II) ions, study Some factors affect the adsorption process on bentonite clay, such as contact time, pH the solution, Adsorbent particle size, Initial concentration of solutions and temperature of the solution were examined in the a batch process mode. The amount of adsorbed Cd (II) increased with height temperature, the optimum adsorption pH was about 6.5. Under this condition, the percent removal was 95.17%. The adsorption isotherms were studied and the results of adsorption processes were more fitted with Friendlich model rather than Langmuir adsorption model. Thermodynamic study showed that, ΔH was endothermic, ΔG is found to be negative That is, the process is automatic and ΔS was found to be positive. The current study also involves practical application using bentonite to get rid of Cd(II) ions to from wastewater of Hamdan's station of the Basra- iraq, The results indicate high affinity (97.84%) removal of Cd(II) ions.
Show more [+] Less [-]Removal of Colour and COD in Biologically pre-treated Leachate using Activated Carbon from Corn Cobs
2022
Thongkrua, Suchanya | Suriya, Patcharapohn
Activated carbon was prepared from corn cob agricultural waste with different impregnation ratios and pyrolysis times. The optimal adsorbent prepared using at 4:1 ZnCl2:corn cob char ratio at a temperature of 800 °C for 180 min provided the maximum Brunauer-Emmett-Teller (BET) surface area, total pore volume and average pore width, with values of 912.47 m2/g, 0.52 cm3/g and 22.61 Å, respectively. ZnCl2 was effective in creating well-developed pores on the surface of the activated carbon. The removal efficiency and adsorption capacity of the colour and the chemical oxygen demand (COD) of the biologically pre-treated leachate were examined utilizing the best corn cob activated carbon (CCAC) with varying CCAC dosages, contact times and initial pH values. The greatest colour and COD removal effectiveness were 88.6±0.2% and 83.7±0.4%, respectively, at the optimum CCAC dosage of 12 g for 40 min with an initial pH value of 10. In addition, maximum adsorption capacities were achieved for colour and COD of 10.3±0.02 mg/g and 12.6±0.05 mg/g, respectively, under the same conditions. The kinetics of colour and COD adsorption fitted very well with pseudo-second-order kinetic model. The CCAC performs well as an adsorbent for removing colour and COD in biologically pre-treated leachate.
Show more [+] Less [-]Characterization and Application of Biochar from spent fermentation sludge of coir wastes in removing Malachite green from effluent water
2022
Sudhakaran, Ajith | Rajan, Revathy | Ravindranath, Anita
Lignin rich solid residues after saccharification during the production of ethanol from lignocellulosic substrates are major concern during past times. These solid residues left after the saccharification of Coir pith and Bit fiber waste are pyrolysed at 350 oC to yield biochar, which has been characterized and its potential for removal of Malachite Green, a dye present in the effluents from coir product manufacturing units are studied. FTIR and XRD spectra revealed the diverse functional groups present on the surface of biochar. SEM images showed the porous structure of the biochar. A maximum dye removal efficiency of 99.5% was achieved using Coir Pith Biochar (1 %) within 24 hours of treatment at a dye concentration of 100 mg/l. The removal efficiency was 99.4 % using Bit Fiber Biochar (0.8 %) in the same treatment period. The efficiency of removal was enhanced on adjusting the pH to 4 at which the dye removal of 99.6 % and 99.7 % was achieved using Bit fiber biochar and Coir pith biochar respectively. The residence time was significantly reduced to 2 and 4 hours respectively for bit fiber and coir pith biochar at pH 4 and hence the produced biochars are cost effective adsorbents for removal of dyeing effluents in wastewater. The adsorption fits into pseudo-second order kinetics and is well described by langmuir isotherm model. This would also facilitate the sustainable use of spent solid substrates left after lignocellulosic ethanol production in a more economical way.
Show more [+] Less [-]Batch and Column Studies on Nickle and Cadmium Removal Using Iranian Clay-based Geopolymer
2021
Bakhtiari, Somayeh | Zeidabadinejad, Asma | Abbaslou, Hanieh | Ghanizadeh, Alireza
The production rate of industrial and agricultural waste is increasing due to population growth. Soil is the most important receiver of industrial and agricultural waste. Contaminants such as heavy metals in various waste after reception by the soil, immediately become part of the cycle that has different impacts on the environment. Geopolymer, as a chemical stabilizer has the potential to stabilize heavy metals in the soil. In this research, several geopolymers for the stabilization of heavy metals in soil were synthesized. Silicon dioxide (SiO2) and aluminosilicate (Al2SiO4) must be used to produce the geopolymers. Rice husk ash was used as the SiO2 source. Also, Iranian zeolite and sepiolite, and red clay soil were utilized as the source of Al2SiO4. The synthesized geopolymers were investigated for the adsorption of nickel and cadmium. Also, batch and column studies of using geopolymers for the chemical stabilization of heavy metals in soil were conducted. The results revealed a high adsorption capacity of the geopolymers. The zeolite, sepiolite, and red clay geopolymer-soil samples adsorbed 100% of the heavy metals (i.e., Ni and Cd) at a concentration of 100 ppm. The zeolite geopolymer adsorbent adsorbed 57% and 96% of Ni and Cd at a concentration of 1000 ppm, respectively. In general, it was concluded that the use of geopolymer compounds in soils with high heavy metal adsorption capacity could be an efficient approach to prevent groundwater resource pollution.
Show more [+] Less [-]Optimisation of Crystal Violet and Methylene Blue Dye Removal from Aqueous Solution onto Water Hyacinth using RSM
2021
Prasad, Rajnikant | Yadav, Kunwar Durg
In this study, the adsorptive removal of two dyes (crystal violet (CV) and methylene blue (MB)) with HNO3 pre-treated water hyacinth powder (WHP) adsorbent was analysed. The experiments were designed using response surface methodology (RSM) with variable input parameter pH (2-12), adsorbent dose (0.5-3 g/L), initial dyes concentration (25-200 mg/L) and time (10-180 min). The optimization condition for dye removal were (pH = 7.22, adsorbent dose = 3.0 g/L, initial dye concentration = 195.28 mg/L and time of contact = 99.29 min) for CV with removal of 98.20% and (pH = 9.82, adsorbent dose = 2.96 g/L, initial dye concentration = 199.36 mg/L and contact time = 111.74 min) for MB with removal of 97.843%. The above findings observed that pre-treated water hyacinth powder can be utilised as a cost-effective and efficient adsorbent for dye effluent wastewater treatment.
Show more [+] Less [-]Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology
2020
Tabatabaei, F. S. | Izanloo, H. | Heidari, H. | Vaezi, N. | Zamanzadeh, M. | Nadali, A. | Aali, R. | Asadi-Ghalhari, M.
Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four independent variables, namely the initial concentration of Arsenic (III), pH, adsorbent dose, and contact time have been investigated through Response Surface Methodology. Design-Expert software and Central Composite Design method have been used to design and analyze the experiments and results. Also, SEM and FTIR analysis have been conducted to characterize the absorbent morphology. The optimum initial concentration of Arsenic (III), pH, contact time, and adsorbent dosage are 30ppm, 5, 49.99min, and 8g/l, respectively. Under these optimum conditions, the Arsenic (III) removal efficiency is 67%. The predicted 2FI model shows the highest Arsenic removal coefficient (R2=0.887).
Show more [+] Less [-]Effective Removal of Indigo Carmine in Aqueous Solutions using a Low-Cost Adsorbent Developed from Corn Husk Waste: Synthesis, Batch, and Optimization Studies
2023
Handayani, Tuti | Emriadi, Emriadi | Deswati, Deswati | Ramadhani, Putri | Zein, Rahmiana
Acid-activated corn husk waste (CHW) was used to investigate the adsorption mechanism of Indigo Carmine (IC) dye from an aqueous solution. The effect of different operating parameters such as pH (1-7), initial IC dye concentration (40-400 mg/L), contact time (5-75 min), and heating temperature (25–200 °C) was measured on the removal of IC dye by the CHW. The maximum uptake of IC dye was observed at an initial pH of 2. The maximum capacity of 13.57 mg/g and the maximum dye removal of 89.01 % in wastewater. The adsorbents were characterized using Fourier Transforms Infrared Spectrophotometry (FTIR), Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, X-ray Fluorescence (XRF), and Thermogravimetry Analysis. The characterization process reveals the differences in adsorbent characteristics before and after the adsorption processes. The Langmuir showed the best fitting (R2 = 0.977) and described multilayer adsorption on diverse surfaces. The pseudo-second-order kinetic model best correlated with the experimental data (R2 = 0.981). Thermodynamics revealed that adsorption was favorable spontaneous and exotherm. The study's results indicated that using CHW as a low-cost adsorbent to treat IC dye was efficient and beneficial to the environment.
Show more [+] Less [-]Environmental Performance of Alternative Schiff Bases Synthesis Routes: A Proposal for CO2 Storages
2022
Yaseen, Anahed A. | Yousif, Emad | Al‐Tikrity, Emaad T. B. | Kadhom, Mohammed | Yusop, Muhammad R. | Ahmed, Dina S.
The increased consumption of fossil fuels provokes high levels of carbon dioxide (CO2) emissions, which give rise to serious environmental issues. Accordingly, designing and utilizing new classes of materials, such as Schiff bases, to capture CO2 gained significant attention from researchers worldwide. In the present work, two Schiff bases were synthesized and examined as storage materials for carbon dioxide gas. The prepared compounds were obtained by reacting trimethoprim with two aldehydes severally (benzaldehyde and parabromobenzaldehyde) in boiling methanol. The surface morphology of the compounds was investigated via field emission scanning electron microscopy (FESEM). The Brunauer-Emmett-Teller (BET) test showed that Schiff bases 1 and 2 have surface areas of 17.993 and 2.732 m2/g, pore volumes of 0.008 and 0.005 cm3/g, and pore diameters of 17.02 and 74.89 nm, respectively. Reasonable uptake values of CO2 (31.36 cm3/g, 6.2 wt%) and (25.30 cm3/g, 5.0 wt%) were achieved by the prepared Schiff bases 1 and 2, respectively, at 313 K temperature and 40 bars pressure.
Show more [+] Less [-]