International audience | The cocktail of pesticides sprayed to protect crops generates a miscellaneous and generalized contamination of water bodies. Sorption, especially on soils, regulates the spreading and persistence of these contaminants. Fine resolution sorption data and knowledge of its drivers are needed to manage this contamination. The aim of this study is to investigate the potential of Mid-Infrared spectroscopy (MIR) to predict and specify the adsorption and desorption of a diversity of pesticides. We constituted a set of 37 soils from French mainland and West Indies covering large ranges of texture, organic carbon, minerals and pH. We measured the adsorption and desorption coefficients of glyphosate, 2,4-dichlorophenoxyacetic acid (2,4-D) and difenoconazole and acquired MIR Lab spectra for these soils. We developed Partial Least Square Regression (PLSR) models for the prediction of the sorption coefficients from the MIR spectra. We further identified the most influencing spectral bands and related these to putative organic and mineral functional groups. The prediction performance of the PLSR models was generally high for the adsorption coefficients Kdads (0.4 < R 2 < 0.9 & RPIQ > 1.8). It was contrasted for the desorption coefficients and related to the magnitude of the desorption hysteresis. The most significant spectral bands in the PLSR differ according to the pesticides indicating contrasted interactions with mineral and organic functional groups. Glyphosate interacts primarily with polar mineral groups (OH) and difenoconazole with hydrophobic organic groups (CH2, C=C, COO-, CO , CO -C). 2,4-D has both positive and negative interactions with these groups. Finally, this work suggests that MIR combined with PLSR is a promising and cost-effective tool. It allows both the prediction of adsorption and desorption parameters and the specification of these mechanisms for a diversity of pesticides including polar active ingredients.

International audience | The nanoscale size of plastic debris makes them potential efficient vectors of many pollutants and more especially of metals. In order to evaluate this ability, nanoplastics were produced from microplastics collected on a beach exposed to the North Atlantic Gyre. The nanoplastics were characterized using multi-dimensional methods: asymmetrical flow field flow fractionation and dynamic light scattering coupled to several detectors. Lead (II) adsorption kinetics, isotherm and pH-edge were then carried out. The sorption reached a steady state after around 200 min. The maximum sorption capacity varied between 97% and 78.5% for both tested Pb concentrations. Lead (II) adsorption kinetics is controlled by chemical reactions with the nanoplastics surface and to a lesser extent by intraparticle diffusion. Adsorption isotherm modeling using Freundlich model demonstrated that NPG are strong adsorbents equivalent to hydrous ferric oxides such as ferrihydrite (log against 11.76 for NPG and ferrihydrite, respectively). The adsorption is dependent upon pH, in response to the Pb(II) adsorption by the oxygenated binding sites developed on account of the surface UV oxidation under environmental conditions. They could be able to compete with Fe or humic colloids for Pb binding regards to their amount and specific areas. Nanoplastics could therefore be efficient vectors of Pb and probably of many other metals as well in the environment.

International audience | The nanoscale size of plastic debris makes them potential efficient vectors of many pollutants and more especially of metals. In order to evaluate this ability, nanoplastics were produced from microplastics collected on a beach exposed to the North Atlantic Gyre. The nanoplastics were characterized using multi-dimensional methods: asymmetrical flow field flow fractionation and dynamic light scattering coupled to several detectors. Lead (II) adsorption kinetics, isotherm and pH-edge were then carried out. The sorption reached a steady state after around 200 min. The maximum sorption capacity varied between 97% and 78.5% for both tested Pb concentrations. Lead (II) adsorption kinetics is controlled by chemical reactions with the nanoplastics surface and to a lesser extent by intraparticle diffusion. Adsorption isotherm modeling using Freundlich model demonstrated that NPG are strong adsorbents equivalent to hydrous ferric oxides such as ferrihydrite (log against 11.76 for NPG and ferrihydrite, respectively). The adsorption is dependent upon pH, in response to the Pb(II) adsorption by the oxygenated binding sites developed on account of the surface UV oxidation under environmental conditions. They could be able to compete with Fe or humic colloids for Pb binding regards to their amount and specific areas. Nanoplastics could therefore be efficient vectors of Pb and probably of many other metals as well in the environment.

In order to determine the mechanisms of the retention of 60Co, 85Sr and 134Cs in natural silica sand columns, desorption experiments were performed by changes of pH and ionic strength and by injection of natural organic matter (NOM). Injection of KCl (0.1 M) resulted in a high release of 60Co (60-100%) and 85Sr (72-100%) but a smaller release of 134Cs (31-66%). Only limited release of 60Co (66%) and 85Sr (71%) and no release of 134Cs were observed by injection of NOM. The different percentages of desorption were related to the chemical characteristics of the organic colloids previously retained in columns before the desorption step. The results evidenced different sorption processes on energetically heterogeneous surface sites. According to the initial conditions, the binding of the radionuclides to the solid phase resulted from weak and easily reversible sorption processes to strong association probably by inner sphere complexes. The rather weak release of 134Cs by KCl was attributed to the strong retention of 134Cs by clay coatings on the natural silica sand surfaces. © 2005 Elsevier Ltd. All rights reserved.

Phosphorus removal from wastewater has been of growing interest for some decades to avoid eutrophication in surface water. In subsurface constructed wetlands precipitation and adsorption are the main mechanisms responsible of P uptake. The use of calcareous media is attractive because of p-ca interactions. Two media (calcite and recycled crushed concrete (rcc)) were examined in batch and continuous systems. They show attractive sorption capacities using batch experiments, however experiments carried out in open reactors pointed out some limitation in retention capacities and effluent quality. rcc was sensitive to a strong dissolution leading to a quick phosphorus precipitation but induced high conductivity and ph values in the treated water. Calcite efficiency depended on the material dissolution rate, directly linked to the carbonate equilibrium of the solution. Microscopic observations of the calcite surface show crystal making of phosphorus precipitate. Crystal growth seems to be the main P uptake once materials surfaces are covered. No experimental condition allows to reach an effluent concentration below 2 mgp.l-1.

Competing ions strongly affect heavy metal sorption onto the solid surfaces of soil. This study evaluated competitive sorption of Cd, Cu, Ni, Pb and Zn on three soils: Calcixerollic Xerochrept, Paralithic Xerorthent and Lithic Haplumbrept. Monometal and competitive sorption isotherms were obtained at 25°C. The individual effect of ions on retention of the others was ascertained by a fractional factorial analysis design. Most of the sorption isotherms belonged to type L subtype 2 in the classification of Giles. In competitive sorption the initial linear part was shorter and the knee sharper when compared with monometal sorption isotherms. Parameters related to sorptive capacity, such as Point B, Langmuir monolayer and Freundlich distribution coefficient, were higher in monometal than in competitive sorption, and in basic soils than in acidic soil. Calcium desorbed at different points of the sorption isotherms indicated that cationic exchange with Ca was the main retention mechanism in calcareous soils. For Pb, the ratio Ca desorbed/Pb sorbed was close to one; for Cu, Ni and Zn the ratio ranged from 1.20 to 1.37, probably due to partial dissolution of calcium carbonates by hydrolytic processes during retention. On the other hand, Cd had a ratio around 0.6 reflecting another additional retention mechanism, probably surface complexation. Fractional factorial design confirmed that the presence of the cations investigated reduced the amount of the five metals retained, but the presence of Cu and Pb in the system depressed Ni, Cd and Zn sorption more than the inverse. Cation mobility was enhanced when equilibrium concentration increased and the effect was higher in Ca-saturated soils.

Effluent from the textile industry is a major source of water pollution. Textile effluents contain a high amount of color, turbidity, BOD, and COD, which are highly toxic and affect aquatic organisms as well as human beings. Physical and chemical treatments of these effluents are difficult and costly. Adsorption is an effective method to treat textile industry effluent. In the present study, chitosan is selected as an adsorbent, derived from the exoskeleton of marine crustaceans like shrimp and crab by chemical processing. The color was removed using chitosan from shrimp and crab shells separately. On the sixth day of treatment, shrimp shell chitosan removed 100% of color from textile industry effluent and proved to be a better adsorbent.

Mesoporous clay-starch ceramic pellets have been prepared using silica-rich low fire clay and potato starch as a pore-forming agent. The ceramic pellets prepared using 30% starch, showed the highest porosity and lowest compressive strength among all the different pellets. Batch mode studies using the pellets showed higher methylene blue adsorption capacity with an increase in time and increased initial dye concentration. The adsorption capacity was found to decrease with increasing pellet dose, while pH had a negligible effect on methylene blue removal which makes them a suitable adsorbent in both acidic and basic mediums. Adsorption isotherm analysis of the process was followed by the Langmuir adsorption isotherm whereas the kinetics analysis fitted well with the pseudo-second-order kinetic model. A low-cost, simple device was made from a stainless-steel wire mesh with mesoporous ceramic pellets enclosed in it, which can easily be dipped and taken out of an aquarium and can remove methylene blue from water.