Benthic invertebrates can uptake metals through diffusion of free ion solutes, or ingestion of sediment-bound forms. This study investigated the efficacy of the metal chelating resin SIR 300™ in adsorbing porewater metals and isolating pathways of metal exposure. A field experiment (Botany Bay, Sydney, Australia) and a laboratory toxicity test each manipulated the availability of porewater metals within contaminated and uncontaminated sediments. It was predicted that within contaminated sediments, the resin would adsorb porewater metals and reduce toxicity to invertebrates, but in uncontaminated sediments, the resin would not significantly affect these variables. Whereas in the laboratory, the resin produced the predicted results, in the field the resin increased porewater metal concentrations of contaminated sediments for at least 34 days and decreased abundances of four macroinvertebrate groups, and richness in all sediments. These contrasting findings highlight the limits of extrapolating the results of laboratory experiments to the field environment.

Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg−1, respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB. Activated carbon promotes remediation of soils historically contaminated with PCB.

Desorption of pyrene and phenanthrene, from two charcoals and humic acid preloaded charcoals were studied. Desorption occurred obviously in two fractions, with rapid and slow desorption rate constant ranging from 0.18 to 0.71 d-1, and from 6.3 × 10-5 to 7.4 × 10−3 d-1, respectively. Both the kinetics and percentage extent of desorption were influenced greatly by the properties of chemical and charcoal. Generally, slower and less desorption is related to larger chemical at lower level, and occurred from charcoal with greater aromaticity and polarity. Both rapid and slow desorption rates of pyrene decreased after the two charcoals were preloaded with humic acids. This demonstrates that the size and surface property of charcoal micropores exhibit great influence on the combination state of sorbed chemicals. Aging caused a greater reduction in desorption of phenanthrene compared to pyrene, which supports the mechanism of the transferring of chemical molecules from fast-desorbing sites to slowly-desorbing sites during aging.

The effectiveness and mechanism of nano-hydroxyapatite particles (nHAp) in immobilizing Pb and Cd from aqueous solutions and contaminated sediment were investigated. The maximum sorption amount (Qmax) of Pb and Cd in aqueous solution was 1.17 and 0.57 mmol/g. The X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) surface and depth analysis indicated that dissolution-precipitation is the primary immobilization mechanism for Pb, while surface complexation and intraparticle diffusion account for Cd sequestration. Different amounts of nHAp (0–10% nHAp/dry weight) were added to the contaminated sediment. Sequential extraction showed that nHAp could effectively reduce the exchangeable fraction of Pb and Cd in the sediment and significantly reduce the concentration in porewater. The results in this study showed that nHAp can immobilize Pb and Cd in sediment effectively. Nano-hydroxyapatite shows potential and advantages to immobilize lead and cadmium in aqueous solution and sediment.

A soil column leaching experiment was used to gain insight into the long-term metal immobilization capacity of cyclonic ashes (CAH) compared to lime (LIME). Twenty six years of rainfall were simulated. Initially, all amended soils were brought to an equal soil pH. This was done to obtain optimal conditions for the detection of metal immobilization mechanisms different from just a pH effect. During the simulation period, soil pH in all treatments decreased in parallel. However, the evolution of metal mobility and phytoavailability showed a clearly distinct pattern. The strong reduction in metal immobilizing efficiency observed in the lime treatment at the end of the simulation period was much less pronounced, or even absent, in the CAH treatments. Moreover, metal accumulation in plants grown on the CAH amended soil was significantly lower compared to the untreated and the lime treated soil. CAH + SS treatment delivered the strongest reductions in metal mobility and bioavailability.

The accumulation and rhizotoxicity of Ni to pea were investigated. Calcium, H, and Ni competed for root-binding sites with high pH and low Ca favoring more Ni accumulation. At low pH, Ca accumulation is the key factor determining root growth, while at medium to high pH, root elongation is more sensitive to Ni concentration. The tissue concentration of Ni and Ca ([Ni]t or [Ca]t, μmol g-1 dry root) can be predicted from total dissolved Ni ([Ni]T, μM), pH, and total dissolved Ca ([Ca]T, mM) by two approaches. Approach 1 is the empirical equations [Ni]t = (0.361 pH-0.695[Ca]T)*[Ni]T and [Ca]t = 8.29 pH + 10.8 [Ca]T. The second approach involves a two-step model. The surface-bound Ni and Ca are estimated from a surface adsorption model with binding constants derived from independent ion adsorption experiments. Then transfer functions are used to predict internal root Ni and Ca accumulation.

Chars were generated by pyrolyzing pine wood at temperatures between 300 °C and 700 °C for 6 h and at 500 °C for 10–300 min. Their organic content and surface acidity decreased, and BET surface area increased, with increasing pyrolytic temperature and time. The uptake of benzene and nitrobenzene increased with increasing pyrolytic temperature and time with isotherms characterized by a transition from less to more concave-downward. The isotherms with low-temperature and short-time chars were fitted to the dual Langmuir-partition model, whereas those with high-temperature chars to the dual-Langmuir model. Calculations suggest that the organic phases of chars functioned as partition media and the uptake of benzene and nitrobenzene on carbonized chars occurred first in micropores via pore-filling and later in larger pores through capillary condensation and adsorption. It is concluded that chars may be considered to consist of the partition domain, the high-energy micropores domain and the low-energy large pores domain. Pine chars consist of the partition domain, the micropores domain and the large pores domain in terms of organic contaminant uptake.

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m2 g−1) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.

Batch adsorption experiments were carried out to study the adsorptive removal and diffusion mechanism of para-chlorophenol (p-CP) onto Calgon Filtrasorb 400 (F400) activated carbon. The external mass transfer resistance is negligible in the adsorption process carried out under different conditions in batch operation. Intraparticle diffusion model plots were used to correlate the batch p-CP adsorption data; three distinct linear sections were obtained for every batch operation. The textural properties of F400 activated carbon showed that it has a large portion of supermicropores, which is comparable to the size of the p-CP molecules. Due to the stronger interactions between p-CP molecules and F400 micropores, p-CP molecules predominantly diffused and occupied active sites in micropore region by hopping mechanism, and eventually followed by a slow filling of mesopores and micropores. This hypothesis is proven by the excellent agreement of the intraparticle diffusion model plots and the textural properties of F400 activated carbon.

Laboratory batch and column experiments were conducted to investigate the immobilization of phosphorus (P) in soils using synthetic magnetite nanoparticles stabilized with sodium carboxymethyl cellulose (CMC-NP). Although CMC-stabilized magnetite particles were at the nanoscale, phosphorus removal by the nanoparticles was less than that of microparticles (MP) without the stabilizer due to the reduced P reactivity caused by the coating. The P reactivity of CMC-NP was effectively recovered when cellulase was added to degrade the coating. For subsurface non-point P pollution control for a water pond, it is possible to inject CMC-NP to form an enclosed protection wall in the surrounding soils. Non-stabilized “nanomagnetite” could not pass through the soil column under gravity because it quickly agglomerated into microparticles. The immobilized P was 30% in the control soil column, 33% when treated by non-stabilized MP, 45% when treated by CMC-NP, and 73% when treated by both CMC-NP and cellulase. CMC-stabilized magnetite nanoparticles can effectively penetrate soil columns and immobilize phosphate in situ.