Refine search
Results 1-10 of 11
Removal of Benzyl butyl phthalate by Polyetheretherketone/polyvinylalcohol nanocomposite Modified with Zinc oxide nanoparticles Adsorbent from Wastewater
2024
Cheraghi, Reza | Abrishamkar, Maryam | Jalali Jahromi, Hossein | Hoseini, Farzaneh
The applicability of Polyetheretherketone/polyvinylalcohol nanocomposite modified with zinc oxide nanoparticles synthesis for the removal of benzyl butyl phthalate from wastewater. Identical techniques, including BET, FT-IR, XRD, and SEM, have to characterize this unknown material. The investigation shows the applicability of adsorbent PEEK/PVA/ZnONPs, as an available, suitable, and low-cost adsorbent for adequately removing the benzyl butyl phthalate from wastewater. The impacts of variables, including benzyl butyl phthalate concentration, adsorbent, pH, and time (15 mgL-1, 0.3 g, 5.0, and 60 min). Based on the received data, the adsorption of benzyl butyl phthalate on the PEEK/PVA/ZnONPs adsorbent agrees well with the Langmuir adsorption model isotherm (qm = 34.24 mgg-1). The results of the thermodynamic parameter showed a negative enthalpy (-77.0 KJ/mol), a negative Gibbs free energy (-11.7 KJ/mol), and negative entropy (-274.0 J/K.mol). This led to the conclusion that the adsorption process is energetically possible, and exothermic was also spontaneous. This work indicates that the PEEK/PVA/ZnONPs, used as an ecologically adapted, adsorbent holds promise for eliminating benzyl butyl phthalate from wastewater.
Show more [+] Less [-]Mechanisms of Trace Metal Elements Removal from Water using Low-Cost Biochar Adsorbents: A mini review
2024
Srivastav, Arun Lal | Rani, Lata | Sharda, Prakriti | Sharma, Ajay
Trace metal elements are toxic to the environment and human health and can be removed from water through adsorption. Development of low-cost adsorbents would always been a matter of achievement of every adsorption study as usually many adsorbents were found to be expensive in nature. In this regard, biochar adsorbents gained significant attention due to high adsorption capacity, low-cost and environmental sustainability. Pyrolysis is used to produce biochar adsorbents at varying temperature ranged from 300°C-700°C. The adsorption capacities of palm fiber biochar adsorbents are remarkable which was found around ~198 mg/g for cadmium removal. However, bamboo-based biochar had 868 mg/g of adsorption capacity for arsenate removal. This review aims to provide the current discusses the sources and impacts of trace metal elements in water along with properties of biochar including its composition, surface area, pore structure, and surface functional groups. Further, various types of biomasses have also been mentioned for producing biochar such as agricultural wastes, food wastes, forestry residues, etc. The paper also discusses the different types of mechanisms involved in the adsorption of heavy metal biochar adsorbents like electrostatic attraction, ion exchange, surface complexation etc.
Show more [+] Less [-]Application of Artificial Neural Network and Multiple Linear Regression for Modelling Adsorptive Removal of Pb (II) ions over Cedrus deodara Bark Powder
2024
Lall, Anurag | Pandey, Avinash | Mani, Jyoti
Cedrus deodara is a coniferous tree native to Himalayan region. Its wood is a valuable resource for the timber industry; however, its bark is typically discarded as a waste material. The present study examines the performance of Cedrus deodara bark powder (CD) as an inexpensive adsorbent for elimination of Pb (II) ions. In addition to this multiple linear regression (MLR) and artificial neural network (ANN) models were developed for modelling the adsorption process and prediction of Pb (II) removal efficiency. The structural and chemical properties of CD were explored using Field Emission Scanning Electron Microscope (FE-SEM), Energy Dispersive Spectrometer (EDS), X-Ray Diffractometer (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). Batch experiments were conducted to investigate the influence of factors including pH, contact time, initial Pb (II) concentration and temperature on Pb (II) adsorption. The adsorption followed pseudo-second-order kinetic and Langmuir isotherm models with maximum monolayer uptake capacity 77.52 mg/g. Based on the thermodynamic criteria, the process was endothermic and spontaneous with enthalpy change (ΔH = 8.08 kJ/mol), free energy change (ΔG = -2.44 kJ/mol) and entropy change (ΔS = 0.03 kJ/K/mol). Statistical comparison of MLR model (R2 = 0.817, RMSE = 8.954, MAPE = 17.379 %) and ANN model (R2 = 0.993, RMSE = 1.777, MAPE = 2.054 %) confirmed that ANN model was far more accurate in predicting removal efficiency.
Show more [+] Less [-]Application of mid-infrared spectroscopy to the prediction and specification of pesticide sorption: A promising and cost-effective tool
2024
Dollinger, Jeanne | Thoisy, Jeanne-Chantal | Gomez, Cécile | Samouelian, Anatja | Laboratoire d'étude des Interactions Sol - Agrosystème - Hydrosystème (UMR LISAH) ; Institut de Recherche pour le Développement (IRD)-AgroParisTech-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Institut Agro Montpellier ; Institut national d'enseignement supérieur pour l'agriculture, l'alimentation et l'environnement (Institut Agro)-Institut national d'enseignement supérieur pour l'agriculture, l'alimentation et l'environnement (Institut Agro) | Ecologie fonctionnelle et écotoxicologie des agroécosystèmes (ECOSYS) ; AgroParisTech-Université Paris-Saclay-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)
International audience | The cocktail of pesticides sprayed to protect crops generates a miscellaneous and generalized contamination of water bodies. Sorption, especially on soils, regulates the spreading and persistence of these contaminants. Fine resolution sorption data and knowledge of its drivers are needed to manage this contamination. The aim of this study is to investigate the potential of Mid-Infrared spectroscopy (MIR) to predict and specify the adsorption and desorption of a diversity of pesticides. We constituted a set of 37 soils from French mainland and West Indies covering large ranges of texture, organic carbon, minerals and pH. We measured the adsorption and desorption coefficients of glyphosate, 2,4-dichlorophenoxyacetic acid (2,4-D) and difenoconazole and acquired MIR Lab spectra for these soils. We developed Partial Least Square Regression (PLSR) models for the prediction of the sorption coefficients from the MIR spectra. We further identified the most influencing spectral bands and related these to putative organic and mineral functional groups. The prediction performance of the PLSR models was generally high for the adsorption coefficients Kdads (0.4 < R 2 < 0.9 & RPIQ > 1.8). It was contrasted for the desorption coefficients and related to the magnitude of the desorption hysteresis. The most significant spectral bands in the PLSR differ according to the pesticides indicating contrasted interactions with mineral and organic functional groups. Glyphosate interacts primarily with polar mineral groups (OH) and difenoconazole with hydrophobic organic groups (CH2, C=C, COO-, CO , CO -C). 2,4-D has both positive and negative interactions with these groups. Finally, this work suggests that MIR combined with PLSR is a promising and cost-effective tool. It allows both the prediction of adsorption and desorption parameters and the specification of these mechanisms for a diversity of pesticides including polar active ingredients.
Show more [+] Less [-]The Suitability of Fe3O4/Graphene Oxide Nanocomposite for Adsorptive Removal of Methylene Blue and Congo Red
2024
Viet Cao, Phuong Anh Cao, Duy Linh Han, Minh Tuan Ngo, Truong Xuan Vuong and Hung Nguyen Manh
In this study, Fe3O4/GO nanocomposite was synthesized by hydrothermal method and tested for its efficiency in removing methylene blue (MB) and congo red (CR) from water. The synthesized nanocomposite was characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The optimal values for MB and CR removal were determined to be pH 6.0, an adsorbent weight of 50.0 mg, and a contact time of 10 min. The adsorption isotherms of the contaminants on the nanocomposite were analyzed using the Freundlich model, indicating a heterogeneous distribution of active sites on the adsorbent surface. The highest adsorption capacity of MB and CR is 135.1 and 285.7 mg.g-1, respectively. Moreover, Fe3O4/GO nanocomposite recycled five cycles with proper adsorption capacity. Overall, the Fe3O4/GO nanocomposite holds great promise for efficient and sustainable water treatment, providing safe and clean water globally.
Show more [+] Less [-]Removal of Nickel from Industrial Wastewater by an Agro-based Composite Adsorbent
2024
R. M. Bhagat and S. R. Khandeshwar
For many years, especially in emerging nations like India, the environment has been threatened by the increased output of industrial wastes and heavy metal toxicity. The usage of inexpensive adsorbents has recently attracted a lot of attention in studies on the removal of heavy metals like nickel from industrial wastewater. The use of agro-based adsorbent is an alternative to conventionally used activated charcoal. In this research, adsorption experiments were carried out using agro-based adsorbent prepared from rice husk, wheat husk, and soybean husk to reduce nickel from industrial wastewater. The adsorption process is simple, economical, and effective is the most preferred method used for the removal of toxic metals like nickel from industrial wastewater. Adsorbents prepared from these husks can be effectively used for adsorption due to low cost & high availability. Characterization of agricultural material by various tests like XRF, proximate analysis, bulk density, and iodine number was conducted on agro-based adsorbents to know the co-relation between removal efficiency and adsorption capacity. The effect of turbidity and pH parameters on Ni removal efficiency is also studied. Results indicated that wheat husk adsorbent appeared to be the most effective for the adsorption of Ni from wastewater as compared to soybean husk and rice husk adsorbent. Wheat husk, soybean husk, and rice husk have removal efficiency in the range of 62.50 to 73.33. Composite absorbents CA-2 with the proportion of 50% wheat husk, 33% soybean husk, and 17% rice husk have 82.50% efficiency, and CA-3 has 80.83% efficiency in removing Nickel. Wheat husk adsorbent, CA-2, and CA-3 are more effectively and sustainably used for the treatment of industrial wastewater to remove heavy metals.
Show more [+] Less [-]Effectiveness of Activated Carbon from Nutmeg Shell (Myristica fragrans) Waste as Adsorbent for Metal Ions Pb(II) and Cu(II) in Liquid Waste
2024
Ishar, Paulina Taba and Fahruddin
Various wastes can be utilized to produce activated carbon, one of the wastes that can be utilized is nutmeg shell (Myristica fragrans). Activated carbon from nutmeg shells (Myristica fragrans) was used in this study to reduce the content of Pb(II) and Cu(II) ions in liquid waste. This research utilized the adsorption method with the batch system to determine the optimum contact time, optimum pH, and adsorption capacity. The characterization of activated carbon was done by Scanning Electron Microscopy (SEM) and Surface Area Analyzers (SAA). The content of Pb(II) and Cu(II) ions in the filtrate after adsorption was analyzed using an atomic absorption spectrophotometer (AAS). The results of SEM analysis showed that the carbon surface was cleaner and had more open pores after the activation process than before activation. The carbon surface area is 19.6243 m2.g-1. From the results of AAS analysis, the optimum time and pH for Pb(II) and Cu(II) ions was 40 min at pH 5 and 70 min at pH 4. With the Freundlich isotherm method, the adsorption capacity of the adsorbent for Pb(II) ions was 9.6028 mg.g-1 and Cu(II) ions was 0.035 mg.g-1, and the adsorption effectiveness on liquid waste for Pb and Cu metals was 1.9454 mg.g-1 and 0.4251 mg.g-1, respectively. The results showed that activated carbon from the nutmeg shell (Myristica fragrans) was able to reduce the levels of Pb(II) and Cu(II) ions in liquid waste.
Show more [+] Less [-]Removal of Nickel from Industrial Wastewater by an Agro-based Composite Adsorbent
2024
R. M. Bhagat and S. R. Khandeshwar
For many years, especially in emerging nations like India, the environment has been threatened by the increased output of industrial wastes and heavy metal toxicity. The usage of inexpensive adsorbents has recently attracted a lot of attention in studies on the removal of heavy metals like nickel from industrial wastewater. The use of agro-based adsorbent is an alternative to conventionally used activated charcoal. In this research, adsorption experiments were carried out using agro-based adsorbent prepared from rice husk, wheat husk, and soybean husk to reduce nickel from industrial wastewater. The adsorption process is simple, economical, and effective is the most preferred method used for the removal of toxic metals like nickel from industrial wastewater. Adsorbents prepared from these husks can be effectively used for adsorption due to low cost & high availability. Characterization of agricultural material by various tests like XRF, proximate analysis, bulk density, and iodine number was conducted on agro-based adsorbents to know the co-relation between removal efficiency and adsorption capacity. The effect of turbidity and pH parameters on Ni removal efficiency is also studied. Results indicated that wheat husk adsorbent appeared to be the most effective for the adsorption of Ni from wastewater as compared to soybean husk and rice husk adsorbent. Wheat husk, soybean husk, and rice husk have removal efficiency in the range of 62.50 to 73.33. Composite absorbents CA-2 with the proportion of 50% wheat husk, 33% soybean husk, and 17% rice husk have 82.50% efficiency, and CA-3 has 80.83% efficiency in removing Nickel. Wheat husk adsorbent, CA-2, and CA-3 are more effectively and sustainably used for the treatment of industrial wastewater to remove heavy metals.
Show more [+] Less [-]Recent Progress of Novel Porous Materials in Wastewater Treatment
2024
Deqi Kong, Hua Chen, Zhen Xiang and Bin Wang
Unavoidably, the expansion of industry causes the release of numerous heavy metals, radionuclides, and organic pollutants into the environment. Due to these pollutants, the extremely toxic, highly carcinogenic chemicals provide a serious risk to people and aquatic life. Wastewater pollutants must be removed to safeguard the ecology. A huge specific surface area, multiple binding sites, a plethora of functional groups, variable pore size, and simplicity of surface modification are just a few advantages of porous materials. They are considered viable candidate materials for the efficient and selective removal of contaminants from aqueous solutions in a range of difficult circumstances due to their benefits. This work reviews the characteristics, methods of functionalization, and ways of modification of many novel porous materials in recent years. The use of these porous materials in the treatment of wastewater was examined. The development potential of porous materials is finally summed up.
Show more [+] Less [-]The Suitability of Fe3O4/Graphene Oxide Nanocomposite for Adsorptive Removal of Methylene Blue and Congo Red
2024
Viet Cao, Phuong Anh Cao, Duy Linh Han, Minh Tuan Ngo, Truong Xuan Vuong and Hung Nguyen Manh
In this study, Fe3O4/GO nanocomposite was synthesized by hydrothermal method and tested for its efficiency in removing methylene blue (MB) and congo red (CR) from water. The synthesized nanocomposite was characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The optimal values for MB and CR removal were determined to be pH 6.0, an adsorbent weight of 50.0 mg, and a contact time of 10 min. The adsorption isotherms of the contaminants on the nanocomposite were analyzed using the Freundlich model, indicating a heterogeneous distribution of active sites on the adsorbent surface. The highest adsorption capacity of MB and CR is 135.1 and 285.7 mg.g-1, respectively. Moreover, Fe3O4/GO nanocomposite recycled five cycles with proper adsorption capacity. Overall, the Fe3O4/GO nanocomposite holds great promise for efficient and sustainable water treatment, providing safe and clean water globally.
Show more [+] Less [-]