Various wastes can be utilized to produce activated carbon, one of the wastes that can be utilized is nutmeg shell (Myristica fragrans). Activated carbon from nutmeg shells (Myristica fragrans) was used in this study to reduce the content of Pb(II) and Cu(II) ions in liquid waste. This research utilized the adsorption method with the batch system to determine the optimum contact time, optimum pH, and adsorption capacity. The characterization of activated carbon was done by Scanning Electron Microscopy (SEM) and Surface Area Analyzers (SAA). The content of Pb(II) and Cu(II) ions in the filtrate after adsorption was analyzed using an atomic absorption spectrophotometer (AAS). The results of SEM analysis showed that the carbon surface was cleaner and had more open pores after the activation process than before activation. The carbon surface area is 19.6243 m2.g-1. From the results of AAS analysis, the optimum time and pH for Pb(II) and Cu(II) ions was 40 min at pH 5 and 70 min at pH 4. With the Freundlich isotherm method, the adsorption capacity of the adsorbent for Pb(II) ions was 9.6028 mg.g-1 and Cu(II) ions was 0.035 mg.g-1, and the adsorption effectiveness on liquid waste for Pb and Cu metals was 1.9454 mg.g-1 and 0.4251 mg.g-1, respectively. The results showed that activated carbon from the nutmeg shell (Myristica fragrans) was able to reduce the levels of Pb(II) and Cu(II) ions in liquid waste.

For many years, especially in emerging nations like India, the environment has been threatened by the increased output of industrial wastes and heavy metal toxicity. The usage of inexpensive adsorbents has recently attracted a lot of attention in studies on the removal of heavy metals like nickel from industrial wastewater. The use of agro-based adsorbent is an alternative to conventionally used activated charcoal. In this research, adsorption experiments were carried out using agro-based adsorbent prepared from rice husk, wheat husk, and soybean husk to reduce nickel from industrial wastewater. The adsorption process is simple, economical, and effective is the most preferred method used for the removal of toxic metals like nickel from industrial wastewater. Adsorbents prepared from these husks can be effectively used for adsorption due to low cost & high availability. Characterization of agricultural material by various tests like XRF, proximate analysis, bulk density, and iodine number was conducted on agro-based adsorbents to know the co-relation between removal efficiency and adsorption capacity. The effect of turbidity and pH parameters on Ni removal efficiency is also studied. Results indicated that wheat husk adsorbent appeared to be the most effective for the adsorption of Ni from wastewater as compared to soybean husk and rice husk adsorbent. Wheat husk, soybean husk, and rice husk have removal efficiency in the range of 62.50 to 73.33. Composite absorbents CA-2 with the proportion of 50% wheat husk, 33% soybean husk, and 17% rice husk have 82.50% efficiency, and CA-3 has 80.83% efficiency in removing Nickel. Wheat husk adsorbent, CA-2, and CA-3 are more effectively and sustainably used for the treatment of industrial wastewater to remove heavy metals.

Unavoidably, the expansion of industry causes the release of numerous heavy metals, radionuclides, and organic pollutants into the environment. Due to these pollutants, the extremely toxic, highly carcinogenic chemicals provide a serious risk to people and aquatic life. Wastewater pollutants must be removed to safeguard the ecology. A huge specific surface area, multiple binding sites, a plethora of functional groups, variable pore size, and simplicity of surface modification are just a few advantages of porous materials. They are considered viable candidate materials for the efficient and selective removal of contaminants from aqueous solutions in a range of difficult circumstances due to their benefits. This work reviews the characteristics, methods of functionalization, and ways of modification of many novel porous materials in recent years. The use of these porous materials in the treatment of wastewater was examined. The development potential of porous materials is finally summed up.

In this study, Fe3O4/GO nanocomposite was synthesized by hydrothermal method and tested for its efficiency in removing methylene blue (MB) and congo red (CR) from water. The synthesized nanocomposite was characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The optimal values for MB and CR removal were determined to be pH 6.0, an adsorbent weight of 50.0 mg, and a contact time of 10 min. The adsorption isotherms of the contaminants on the nanocomposite were analyzed using the Freundlich model, indicating a heterogeneous distribution of active sites on the adsorbent surface. The highest adsorption capacity of MB and CR is 135.1 and 285.7 mg.g-1, respectively. Moreover, Fe3O4/GO nanocomposite recycled five cycles with proper adsorption capacity. Overall, the Fe3O4/GO nanocomposite holds great promise for efficient and sustainable water treatment, providing safe and clean water globally.