Application of empirical models to adsorption of contaminants on natural heterogeneous sorbents is often challenging due to the uncertainty associated with fitting experimental data and determining adjustable parameters. Sediment samples from contaminated and uncontaminated portions of a study site in Maine, USA were collected and investigated for adsorption of arsenate [As(V)]. Two kinetic models were used to describe the results of single solute batch adsorption experiments. Piecewise linear regression of data linearized to fit pseudo-first order kinetic model resulted in two distinct rates and a cutoff time point of 14–19 h delineating the biphasic behavior of solute adsorption. During the initial rapid adsorption stage, an average of 60–80% of the total adsorption took place. Pseudo-second order kinetic models provided the best fit to the experimental data (R2 > 0.99) and were capable of describing the adsorption over the entire range of experiments. Both Langmuir and Freundlich isotherms provided reasonable fits to the adsorption data at equilibrium. Langmuir-derived maximum adsorption capacity (St) of the studied sediments ranged between 29 and 97 mg/kg increasing from contaminated to uncontaminated sites. Solid phase As content of the sediments ranged from 3.8 to 10 mg/kg and the As/Fe ratios were highest in the amorphous phase. High-pH desorption experiments resulted in a greater percentage of solid phase As released into solution from experimentally-loaded sediments than from the unaltered samples suggesting that As(V) adsorption takes place on different reversible and irreversible surface sites.

Classical laboratory-based single-species sediment bioassays do not account for modifications to toxicity from bioturbation by benthic organisms which may impact predictions of contaminated sediment risk to biota in the field. This study aims to determine the effects of bioturbation on the toxicity of zinc measured in a standard laboratory bioassay conducted with chironomid larvae (Chironomus tepperi). The epi-benthic chironomid larvae were exposed to two different levels of sediment contamination (1600 and 1980 mg/kg of dry weight zinc) in the presence or absence of annelid worms (Lumbriculus variegatus) which are known to be tolerant to metal and to have a large impact on sediment properties through bioturbation.Chironomids had 5–6x higher survival in the presence of L. variegatus which shows that bioturbation had a beneficial effect on the chironomid larvae. Chemical analyses showed that bioturbation induced a flux of zinc from the pore water into the water column, thereby reducing the bioavailability of zinc in pore water to the chironomid larvae. This also suggested that pore water was the major exposure path for the chironomids to metals in sediment. During the study, annelid worms (Oligochaetes) produced a thin layer of faecal pellets at the sediment surface, a process known to: (i) create additional adsorption sites for zinc, thus reducing its availability, (ii) increase the microbial abundance that in turn could represent an additional food source for opportunistic C. tepperi larvae, and (iii) modify the microbial community’s structure and alter the biogeochemical processes it governs thus indirectly impact zinc toxicity.This study represents a contribution in recognising bioturbating organisms as “ecological engineers” as they directly and indirectly influence metal bioavailability and impact other sediment-inhabiting species. This is significant and should be considered in risk assessment of zinc levels (and other metals) in contaminated sediment when extrapolating from laboratory studies to the field.

Insecticidal Cry, or Bt, proteins are produced by the soil-endemic bacterium, Bacillus thuringiensis and some genetically modified crops. Their environmental fate depends on interactions with soil. Little is known about the toxicity of adsorbed proteins and the change in toxicity over time. We incubated Cry1Ac and Cry2A in contrasting soils subjected to different treatments to inhibit microbial activity. The toxin was chemically extracted and immunoassayed. Manduca sexta was the target insect for biotests. Extractable toxin decreased during incubation for up to four weeks. Toxicity of Cry1Ac was maintained in the adsorbed state, but lost after 2 weeks incubation at 25 °C. The decline in extractable protein and toxicity were much slower at 4 °C with no significant effect of soil sterilization. The major driving force for decline may be time-dependent fixation of adsorbed protein, leading to a decrease in the extraction yield in vitro, paralleled by decreasing solubilisation in the larval gut.

Wetland plants are considered as suitable biofilters for the removal of metal(loid)s and other contaminants from waters and wastewaters, due to their ability to accumulate and retain the contaminants in their roots. The iron plaque (IP) on the root surface influences the metal(loid)s retention processes. The stimulation of the IP development on roots of Phragmites australis by the external supply of a novel synthetic nanomaterial (nanomaghemite, nFe2O3) and FeSO4 (alone or in combination) was studied. An hydroponic experiment was carried out to evaluate the iron plaque formation after external iron addition, as well as their influence on arsenic immobilization capacity. Microscopic and spectroscopic techniques were utilized to assess the distribution of Fe and As in the roots. The addition of Fe stimulated the generation of the IP, especially when FeSO4 was involved. The nanoparticles alone were not efficient with regard to IP formation or As adsorption, even though they adhered to the root surface and did not enter into epithelial root cells. The combination of FeSO4 and nFe2O3 was the most effective treatment for improving the As removal capacity, and it seems to be an effective way to enhance the rhizofiltration potential of P. australis in As contaminated (waste)waters.

Polycyclic aromatic hydrocarbons (PAHs) in the atmosphere can partition into agricultural crops, which poses a potential risk to human health through the food chain. In this study, controlled chamber experiments were conducted to investigate the kinetic uptake of anthracene (Ant), phenanthrene (Phe), fluoranthene (Fla) and pyrene (Pyr), individually or as a mixture, by the leaf surfaces of living soybean and corn seedlings using the excitation-emission matrix (EEM) coupled with three-way parallel factor analysis (PARAFAC) and n-way partial least squares (n-PLS). The four selected PAHs achieved equilibrium between the air and the two living crop leaf surfaces over the 15-day monitoring period. Inter-species and inter-chemical variability existed in terms of the time required to achieve equilibrium, mass transfer coefficients (kAL) and the equilibrated adsorption capacity (EAC), which was mainly attributed to the different lg KOA values among the four PAHs and the variable leaf-wax content between the soybean and corn species. Compared with when the PAHs existed singly, the time required to achieve adsorption equilibrium was longer while the EAC was reduced for each of the four PAHs in a mixture, which was attributed to competitive adsorption among the coexisting components. These findings prove that the novel analytical method provides a novel platform for the in situ characterization of the environmental behaviors of multiple PAHs, with their spectra overlapping, between the air and plant skin. The coexistence of multiple PAHs in the air inhibits their individual uptake capacity by crop leaf skin, but increases the total adsorption of PAHs, potentially reducing crop security and increasing human health risk via the terrestrial food web.

The Antarctic continent is among the most pristine regions; yet various organic contaminants have been measured there routinely. Air and snow samples were collected during the austral spring (October–November, 2010) along the western Antarctic Peninsula and analyzed for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) to assess the relative importance of long-range transport versus local primary or secondary emissions. Highest concentrations of PCBs, PBDEs and DDTs were observed in the glacier’s snow sample, highlighting the importance of melting glaciers as a possible secondary source of legacy pollutants to the Antarctic. In the atmosphere, contaminants were mainly found in the vapor phase (>65%). Hexachlorobenzene (33.6 pg/m3), PCBs (11.6 pg/m3), heptachlor (5.64 pg/m3), PBDEs (4.22 pg/m3) and cis-chlordane (2.43 pg/m3) were the most abundant contaminants. In contrast to other compounds, PBDEs seem to have originated from local sources, possibly the research station itself. Gas-particle partitioning for analytes were better predicted using the adsorption partitioning model than an octanol-based absorption approach. Diffusive flux calculations indicated that net deposition is the dominant pathway for PBDEs and chlordanes, whereas re-volatilization from snow (during melting or metamorphosis) was observed for PCBs and some OCPs.

This study investigated the effect of fulvic acid (FA) on the colloidal stability and reactivity of nano zero-valent iron (nZVI) at pH 5, 7 and 9. The sedimentation behavior of nZVI differed at different pH. A biphasic model was used to describe the two time-dependent settling processes (i.e., a rapid settling followed by a slower settling) and the settling rates were calculated. Generally, the settling of nZVI was more significant at the point of zero charge (pHpzc), which could be varied in the presence of FA due to the adsorption of FA on the nZVI surface. More FA was adsorbed on the nZVI surface at pH 5–7 than pH 9, resulting in the varying sedimentation behavior of nZVI via influencing the electrostatic repulsion among particles. Moreover, it was found that there was a tradeoff between the stabilization and the reactivity of nZVI as affected by the presence of FA. When FA concentration was at a low level, the adsorption of FA on the nZVI surface could enhance the particle stabilization, and thus facilitating the Cr(VI) reduction by providing more available surface sites. However, when the FA concentrations were too high to occupy the active surface sites of nZVI, the Cr(VI) reduction could be decreased even though the FA enhanced the dispersion of nZVI particles. At pH 9, the FA improved the Cr(VI) reduction by nZVI. Given the adsorption of FA on the nZVI surface was insignificant and its effect on the settling behavior of nZVI particles was minimal, it was proposed that the FA formed soluble complexes with the produced Fe(III)/Cr(III) ions, and thus reducing the degree of passivation on the nZVI surface and facilitating the Cr(VI) reduction.

The objective of present study was to obtain the fixation of nano zero valent iron (nZVI) particles on a permeable matrix and evaluate the performance of this composite material for the removal of Cr(VI) from contaminated waters. The experiments were carried out using the cationic resin Dowex 50WX2 as porous support of the iron nanoparticles. The work was carried out in two phases. The first phase involved the fixation of nZVI on the resin matrix. The resin granules were initially mixed with a FeCl3 solution to obtain the adsorption of Fe(III). Then the Fe(III) loaded resin (RFe) was treated with polyphenol solutions to obtain the reduction of Fe(III) to the elemental state. Two polyphenol solutions were tested as reductants, i.e. green tea extract and gallic acid. Green tea was found to be inefficient, probably due to the relatively big size of the contained polyphenol molecules, but gallic acid molecules were able to reach adsorbed Fe(III) and reduce the cations to the elemental state. The second phase was focused on the investigation of Cr(VI) reduction kinetics using the nanoiron loaded resins (R-nFe). It was found that the reduction follows a kinetic law of first order with respect to Cr(VI) and to the embedded nanoiron. Compared to other similar products, this composite material was found to have comparable performance regarding reaction rates and higher degree of iron utilization. Namely the rate constant for the reduction of Cr(VI), in the presence of 1 mM nZVI, was equivalent to 1.4 h of half-life time at pH 3.2 and increased to 24 h at pH 8.5. The degree of iron utilization was as high as 0.8 mol of reduced Cr(VI) per mole of iron. It was also found that this composite material can be easily regenerated and reused for Cr(VI) reduction without significant loss of efficiency.

Many heavy metals in sediments and water have potential adverse effects on aquatic organisms such as Corbicula fluminea (O.F. Müller, 1774), a bivalve species frequently used as a biomonitor for metal pollution. Studies over the past decades examining the heavy metal uptake by C. fluminea, very few has investigated the effect of hydrodynamic conditions on accumulation of heavy metal by C. fluminea. Therefore, in this study, to investigate the mechanism of intracellular and extracellular accumulation of metal, individuals of C. fluminea were exposed to cadmium (Cd)-treated water under three different hydrodynamic conditions. These included exposures in two set ups: three rates of rotation (500, 350, 200 r/min) in beakers for 10 days, and then exposure to Cd-treated sediment under two naturally turbulent water conditions (14 cm/s and 3.2 cm/s) in experimental flumes for 23 days. Hydrodynamic force increased the burrowing rate but decreased the activity of C. fluminea. After 10 days of exposure, the extracellular concentrations of Cd in the tissues of C. fluminea in the sand group were significantly higher than that in the gravel groups. The intracellular and extracellular concentrations of Cd in the tissues of C. fluminea dramatically increased in the Cd-treated sediment test. Moreover, the concentration of the extracellular Cd adsorbed on the tissues of C. fluminea in the 14 cm/s and 3.2 cm/s groups was significantly higher than that in the control group, whereas the effect of hydrodynamic force on absorption of Cd by C. fluminea was not obvious. These results suggest that hydrodynamic condition plays an important role in extracellular accumulation of Cd by C. fluminea. In future study, when using C. fluminea to assess Cd pollution in aquatic environment, extracellular Cd adsorbed on the tissue should be removed to avoid the influence of hydrodynamics.

In this current work, the magnetic composite microsphere containing glutamine modified chitosan and silica coated Fe3O4 nanoparticles (CS-Gln-MCM) has been successfully prepared and extensively characterized, which is a kind of biodegradable materials. CS-Gln-MCM shows enhanced removal efficiency for both acid green 25 (AG25), an amphoteric dye, and mercury ions (Hg²⁺) from water in the respective while measured pH range compared with chitosan magnetic composite microsphere (CS-MCM) without modification. It is due to the fact that the grafted amino acid provides a variety of additional adsorption active sites and diverse adsorption mechanisms are involved. In AG25 and Hg²⁺ aqueous mixture, the modified adsorbents bear preferential adsorption for AG25 over Hg²⁺ in strong acidic solutions ascribed to multiple interactions between AG25 and CS-Gln-MCM, such as hydrogen bonding and electrostatic interactions. While, in weak acidic conditions, an efficient simultaneous removal is observed for different adsorption effects involved in aforementioned two pollutants. Besides, CS-Gln-MCM illuminates not only short equilibrium time for adsorption of each pollutant less than 20.0 min but also rapid magnetic separation from water and efficient regeneration after saturated adsorption. Therefore, CS-Gln-MCM bears great application potentials in water treatment.