Refine search
Results 1-10 of 293
Removal of Hg (I) and Hg (II) Ions from Aqueous Solutions, Using TiO2 Nanoparticles
2017
Afshar, Elahe | Mohammadi-Manesh, Hossein | Dashti Khavidaki, Hossein
For the first time, the present study removes ions of mercury, in the form of Hg (I) and Hg (II) ions, from aqueous solutions by adsorbing them onto titanium dioxide nanoparticles. The effects of various parameters, such as solution's initial pH, temperature, sorbent dosage, initial mercury concentration, and contact time have been examined on the adsorption process. The experimental results have been compared with Langmuir, Freundlich, and Temkin adsorption isotherms. The maximum adsorption, obtained for Hg (I) and Hg (II) ions, have been 97.5% and 98.6%, respectively. Also, it has been shown that the Langmuir isotherm has better fitting with the equilibrium data than the Freundlich and Temkin isotherms. Thermodynamic parameters of the adsorption, such as and have been calculated, the negative values of which show that the mercury ions adsorption is an exothermic process and that randomness is decreased, respectively. The study of adsorption kinetics shows that the adsorption of Hg (I) and (II) ions with TiO2 nanoparticles is pseudo-second order.
Show more [+] Less [-]Toxic effects of microplastic on marine microalgae Skeletonema costatum: Interactions between microplastic and algae
2017
Zhang, Cai | Chen, Xiaohua | Wang, Jiangtao | Tan, Liju
To investigate toxic effects of microplastic on marine microalgae Skeletonema costatum, both algal growth inhibition test and non-contact shading test were carried out, and algal photosynthesis parameters were also determined. The SEM images were used to observe interactions between microplastic and algae. It was found that microplastic (mPVC, average diameter 1 μm) had obvious inhibition on growth of microalgae and the maximum growth inhibition ratio (IR) reached up to 39.7% after 96 h exposure. However, plastic debris (bPVC, average diameter 1 mm) had no effects on growth of microalgae. High concentration (50 mg/L) mPVC also had negative effects on algal photosynthesis since both chlorophyll content and photosynthetic efficiency (ΦPSⅡ) decreased under mPVC treatments. Shading effect was not one reason for toxicity of microplastic on algae in this study. Compared with non-contact shading effect, interactions between microplastic and microalage such as adsorption and aggregation were more reasonable explanations for toxic effects of microplastic on marine microalgae. The SEM images provided a more direct and reasonable method to observe the behaviors of microplastic.
Show more [+] Less [-]Enhanced adsorption of Cu(II) and Cd(II) by phosphoric acid-modified biochars
2017
Peng, Hongbo | Gao, Peng | Chu, Gang | Pan, Bo | Peng, Jinhui | Xing, Baoshan
In this research, adsorption of Cu(II) and Cd(II) by biochars was investigated. To enhance the adsorption of these two metal ions, a simple modification of biochars by phosphoric acid (H(3)PO(4)) was carried out. The surface area was larger and the contents of oxygen-containing functional groups of modified biochars were more than pristine biochars. In comparison with pristine biochar, modified biochars sorbed Cu(II) and Cd(II) much more strongly. Surface area had significant effects on the sorption of Cu(II) and Cd(II) by modified biochars. X-ray photoelectron spectroscopy analyses indicated that the quantities of carboxyl (-COOH) and hydroxyl (-OH) functional groups of modified biochars were larger than those of pristine biochar at the same pyrolysis temperature. Compared with that of pristine biochars, the strong ability of -COOH and -OH of modified biochars to form complexes with Cu(II)/Cd(II) ions resulted in higher adsorption of these two metal ions. The phosphorus-containing groups of modified biochars, such as P=O and P=OOH from the result of Fourier transform infrared spectroscopy, interacted and also formed complexes with metal ions, possibly resulting in the enhanced adsorption of Cu(II) and Cd(II). Thus, sorption of metal ions by modified biochars was controlled by the mechanism of surface complexation between oxygen containing functional groups and metals. In general, the H(3)PO(4) modification was an effective method that prepared biochars with a high affinity for the sorption of heavy metals.
Show more [+] Less [-]Importance of the structure and nanoporosity of organic matter on the desorption kinetics of benzo[a]pyrene in sediments
2017
Huang, Youda | Zhang, Dainan | Duan, Dandan | Yang, Yu | Xiong, Yongqiang | Ran, Yong
The desorption kinetics and mechanism were investigated using a Tenax extraction technique on different sediments spiked with radiocarbon-labeled benzo[a]pyrene (BaP). Five sedimentary fractions were sequentially fractionated, and the only nonhydrolyzable organic carbon fractions (NHC) were characterized using advanced solid-state 13C nuclear magnetic resonance spectroscopy (NMR), improved six end-member model, and a CO2 gas adsorption technique. The sediments contained high percentages of algaenan and/or sporopollenin but low percentages of black carbon and lignin. A first-order, two-compartment kinetics model described the desorption process very well (R2 > 0.990). Although some of the organic carbon fractions were significantly related to the desorption kinetics parameters, the NHC fractions showed the highly significant correlation. Moreover, the nanoporosity or specific surface area (SSA) of the NHC fractions was highly related to their OC contents and aliphatic C (R2 = 0.960, p < 0.01). The multiple regression equations among the desorption kinetics parameters, structural parameters, and nanoporosity were well established (R2=>0.999). Nanoporosity and aromatic C were the dominant contributors. Furthermore, the enhanced percentages of desorbed BaP at elevated temperatures significantly showed a linear regression with the structure and nanoporosity. To our knowledge, the above evidence demonstrates for the first time that the transfer (or diffusion) of BaP in the nanopores of condensed aromatic components is the dominant mechanism of the desorption kinetics of BaP at organic matter particle scale.
Show more [+] Less [-]Do polyethylene microplastic beads alter the intestinal uptake of Ag in rainbow trout (Oncorhynchus mykiss)? Analysis of the MP vector effect using in vitro gut sacs
2017
Khan, Farhan R. | Boyle, David | Chang, Elisabeth | Bury, Nicolas R.
Microplastic (MP) vector effects have been well described in the literature but surprisingly little is in known about the impact of MPs on the intestinal uptake of contaminants. The present study aimed to determine whether the intestinal fate of Ag was affected by the presence of polyethylene MP beads. Ag (added as ¹¹⁰ᵐAg) was introduced into the lumen of rainbow trout (Oncorhynchus mykiss) anterior/mid-intestine gut sac preparations as Ag only, Ag and MPs (co-exposure) and Ag-incubated MPs (where Ag was adsorbed to the MP). Results show that after 3 h exposure the distribution of accumulated Ag between the four intestinal compartments (mucus layer, mucosal epithelium, muscle layer and serosal saline) was not affected by either MP condition when compared to Ag alone (p > 0.05, One way ANOVA). Across all treatment groups mucus layer binding dominated (54.2–72.6%) whereas relatively little Ag was transported to the blood compartment (i.e. combined muscle layer and serosal saline compartments, 8.5–15.0%). Accompanying adsorption/desorption studies were performed in relevant media. Over 24 h, 60.6± 2.9% of the available Ag in artificial freshwater adhered to the surface of the PE MPs. In pH adjusted luminal fluids (pH 2.2, 4.1, 7.4 and 9.8) that span the range of conditions encountered within the rainbow trout digestive tract, there was almost complete dissociation at acidic pHs within 3 h (<2% remaining on MPs at both pH 2.2 and pH 4.1). Such pHs are typical of piscine stomach. Based on our finding we suggest that following the ingestion of MPs with adsorbed pollutants, desorption would occur prior to entering the site of uptake. The MPs themselves have no impact on the trans-epithelial transport of the contaminant, but the net result of the MP vector effect is to potentially introduce labile contaminant forms into the intestine.
Show more [+] Less [-]Degradation of indoor limonene by outdoor ozone: A cascade of secondary organic aerosols
2017
Rösch, Carolin | Wissenbach, Dirk K. | Franck, Ulrich | Wendisch, Manfred | Schlink, Uwe
In indoor air, terpene-ozone reactions can form secondary organic aerosols (SOA) in a transient process. ‘Real world’ measurements conducted in a furnished room without air conditioning were modelled involving the indoor background of airborne particulate matter, outdoor ozone infiltrated by natural ventilation, repeated transient limonene evaporations, and different subsequent ventilation regimes. For the given setup, we disentangled the development of nucleated, coagulated, and condensed SOA fractions in the indoor air and calculated the time dependence of the aerosol mass fraction (AMF) by means of a process model. The AMF varied significantly between 0.3 and 5.0 and was influenced by the ozone limonene ratio and the background particles which existed prior to SOA formation. Both influencing factors determine whether nucleation or adsorption processes are preferred; condensation is strongly intensified by particulate background. The results provide evidence that SOA levels in natural indoor environments can surpass those known from chamber measurements. An indicator for the SOA forming potential of limonene was found to be limona ketone. Multiplying its concentration (in μg/m³) by 450(±100) provides an estimate of the concentration of the reacted limonene. This can be used to detect a high particle formation potential due to limonene pollution, e.g. in epidemiological studies considering adverse health effects of indoor air pollutants.
Show more [+] Less [-]Using column experiments to examine transport of As and other trace elements released from poultry litter: Implications for trace element mobility in agricultural watersheds
2017
Oyewumi, Oluyinka | Schreiber, Madeline E.
Trace elements are added to poultry feed to control infection and improve weight gain. However, the fate of these trace elements in poultry litter is poorly understood. Because poultry litter is applied as fertilizer in many agricultural regions, evaluation of the environmental processes that influence the mobility of litter-derived trace elements is critical for predicting if trace elements are retained in soil or released to water. This study examined the effect of dissolved organic carbon (DOC) in poultry litter leachate on the fate and transport of litter-derived elements (As, Cu, P and Zn) using laboratory column experiments with soil collected from the Delmarva Peninsula (Mid-Atlantic, USA), a region of intense poultry production. Results of the experiments showed that DOC enhanced the mobility of all of the studied elements. However, despite the increased mobility, 60–70% of Zn, As and P mass was retained within the soil. In contrast, almost all of the Cu was mobilized in the litter leachate experiments, with very little retention in soil. Overall, our results demonstrate that the mobility of As, Cu, Zn and P in soils which receive poultry litter application is strongly influenced by both litter leachate composition, specifically organic acids, and adsorption to soil. Results have implications for understanding fate and transport of trace elements released from litter application to soil water and groundwater, which can affect both human health and the environment.
Show more [+] Less [-]Co-transport of chlordecone and sulfadiazine in the presence of functionalized multi-walled carbon nanotubes in soils
2017
Zhang, Miaoyue | Engelhardt, Irina | Šimůnek, Jirka | Bradford, Scott A. | Kasel, Daniela | Berns, Anne E. | Vereecken, H. (Harry) | Klumpp, Erwin
Batch and saturated soil column experiments were conducted to investigate sorption and mobility of two ¹⁴C-labeled contaminants, the hydrophobic chlordecone (CLD) and the sulfadiazine (SDZ), in the absence or presence of functionalized multi-walled carbon nanotubes (MWCNTs). The transport behaviors of CLD, SDZ, and MWCNTs were studied at environmentally relevant concentrations (0.1–10 mg L⁻¹) and they were applied in the column studies at different times. The breakthrough curves and retention profiles were simulated using a numerical model that accounted for the advective-dispersive transport of all compounds, attachment/detachment of MWCNTs, equilibrium and kinetic sorption of contaminants, and co-transport of contaminants with MWCNTs. The experimental results indicated that the presence of mobile MWCNTs facilitated remobilization of previously deposited CLD and its co-transport into deeper soil layers, while retained MWCNTs enhanced SDZ deposition in the topsoil layers due to the increased adsorption capacity of the soil. The modeling results then demonstrated that the mobility of engineered nanoparticles (ENPs) in the environment and the high affinity and entrapment of contaminants to ENPs were the main reasons for ENP-facilitated contaminant transport. On the other hand, immobile MWCNTs had a less significant impact on the contaminant transport, even though they were still able to enhance the adsorption capacity of the soil.
Show more [+] Less [-]Molecular investigation on the binding of Cd(II) by the binary mixtures of montmorillonite with two bacterial species
2017
Du, Huihui | Qu, ChenChen | Liu, Jing | Chen, Wenli | Cai, Peng | Shi, Zhihua | Yu, Xiao-Ying | Huang, Qiaoyun
Bacteria–phyllosilicate complexes are commonly found in natural environments and are capable of immobilizing trace metals. However, the molecular binding mechanisms of heavy metals to these complex aggregates still remain poorly understood. This study investigated Cd adsorption on Gram-positive Bacillus subtilis, Gram-negative Pseudomonas putida and their binary mixtures with montmorillonite using surface complexation model, Cd K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy and isothermal titration calorimetry (ITC). We have shown that larger amounts of Cd are adsorbed by B. subtilis than by P. putida at pH<∼6, and Cd sorption that binding to phosphate groups plays a more important role in P. putida than in B. subtilis. This remind us that we should consider the microbe species when predict the biochemical behavior of trace metals in microbe-bearing environments. The observed Cd adsorption on the binary bacteria–clay composites was more than that predicted based on the component additivity approach. When taking bacteria–clay (1:1 mass ratio) as a representative example, an approximately 68%:32% metal distribution between the bacterial and mineral fraction was found. Both the EXAFS and ITC fits showed that the binding stoichiometry for Cd-carboxyl/phosphate was smaller in the binary mixtures than that in pure bacteria. We proposed that the significant deviations were possibly due to the physical-chemical interaction between the composite fractions that might reduce the agglomeration of the clay grains, increase the negative surface charges, and provide additional bridging of metals ions between bacterial cells and clays.
Show more [+] Less [-]Effects of titanium dioxide (TiO2) nanoparticles on the photodissolution of particulate organic matter: Insights from fluorescence spectroscopy and environmental implications
2017
Hu, Bin | Wang, Peifang | Hou, Jun | Wang, Chao | Qian, Jin | Zhang, Nannan | Yuan, Qiusheng
Widely used titanium dioxide (TiO2) nanoparticles are likely to accumulate ultimately in sediments and potentially pose a risk to water ecosystems. This study evaluated the effect of TiO2 nanoparticles on the photodissolution of particulate organic matter (POM) through fluorescence spectroscopy. Excitation-emission matrices and parallel factor analyses revealed that the fluorescent characteristics of produced dissolved organic matter (DOM) during photodissolution of suspended sediment and synthetic particulate organic matter (SPOM) were primarily humic-like. SPOM particles appeared to simulate well the photodissolution of suspended sediment. Quasi-complete increases in fluorescence intensity and chromophoric DOM (CDOM) abundance were reached after 90, 60, and 50 min irradiation for TiO2 concentrations of 0, 2, and 5 mg L−1, respectively. The faster increment of fluorescence intensity and CDOM abundance indicated the photocatalytic dissolution of SPOM, as opposite charges between TiO2 and SPOM at pH = 4 favored the adsorption of TiO2 onto SPOM. For sediments, the CDOM abundance and fluorescence intensity decreased with increasing TiO2 concentration, resulting from the photocatalytic degradation of photoproduced DOM from sediments. These results demonstrated that pH plays an important role in the photocatalytic dissolution of POM by TiO2. Therefore, appropriate pH controls should be implemented when TiO2 are used to treat sediments contaminated with organic pollutants. Finally, with increasing use of TiO2, its accumulation in sediments may affect the fate of carbon, nutrients, and heavy metals in shallow-water ecosystems.
Show more [+] Less [-]