Management of solid wastes is considered as an economic and environmental issue in the building stone industry. The current study uses raw and calcined calcareous sludge, generated in the stone cutting factories, in order to remove sulfur dioxide. Sludge characterization has been performed, using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) analyses. The removal experiments of sulfur dioxide have conducted under different humid contents and adsorbent doses. The results showed that the higher the adsorbent dosage and humidity content, the greater the SO2 adsorption.. The calcination process at temperatures of 400, 500, 600, and 700℃ revealed that with rising calcination temperature and humidity content, the adsorbent capability is enhanced considerably. This method could be developed for the management of stone sludge produced from the stone cutting industry through its conversion into an effective and low-cost adsorbent for desulfurization process.

The present study was carried out to investigate the adsorption and leaching behavior of Cu2+, Zn2+ and Pb2+ by sediments collected from the western banks of three different sectors along River Nile at Aswan governorate, Egypt. The feasibility of sediments for the removal of Cu2+, Zn2+ and Pb2+ from aqueous solutions was tested under the effect of three conditions (pH, initial metal concentration and contact time). By increasing pH, the adsorption of Cu2+ and Pb2+ by sediments decreased while that of Zn2+ increased. The optimum pH values for Cu2+, Zn2+ and Pb2+ removal were determined as 5, 8.5 and 5, respectively. The adsorption capacities of sediments for metal ions were in the order of Pb2+ > Cu2+ > Zn2+. The maximum uptake for Cu2+, Zn2+ and Pb2+ by sediments occurred at contact times of 48 h, 24 h and 72 h, respectively. Adsorption data were fitted well by Freundlich, Dubinin–Radushkevich and Temkin isotherms. The experimental results obtained were analyzed using two adsorption kinetic models, pseudo-first-order and pseudo-second-order, in which pseudo-second-order equation described the data more than pseudo-first-order one. The average leaching percentages of Cu2+, Zn2+ and Pb2+ from sediments were 0.77%, 2.72% and 0.38%, respectively, with respect to pH, 0.83%, 2.49% and 0.38%, respectively , with respect to temperature, and also 0.79%, 2.34% and 0.38%, respectively with respect to contact time. The leaching percentages of metal ions from sediments were in the order of Zn2+ > Cu2+ > Pb2+.

International audience | The nanoscale size of plastic debris makes them potential efficient vectors of many pollutants and more especially of metals. In order to evaluate this ability, nanoplastics were produced from microplastics collected on a beach exposed to the North Atlantic Gyre. The nanoplastics were characterized using multi-dimensional methods: asymmetrical flow field flow fractionation and dynamic light scattering coupled to several detectors. Lead (II) adsorption kinetics, isotherm and pH-edge were then carried out. The sorption reached a steady state after around 200 min. The maximum sorption capacity varied between 97% and 78.5% for both tested Pb concentrations. Lead (II) adsorption kinetics is controlled by chemical reactions with the nanoplastics surface and to a lesser extent by intraparticle diffusion. Adsorption isotherm modeling using Freundlich model demonstrated that NPG are strong adsorbents equivalent to hydrous ferric oxides such as ferrihydrite (log against 11.76 for NPG and ferrihydrite, respectively). The adsorption is dependent upon pH, in response to the Pb(II) adsorption by the oxygenated binding sites developed on account of the surface UV oxidation under environmental conditions. They could be able to compete with Fe or humic colloids for Pb binding regards to their amount and specific areas. Nanoplastics could therefore be efficient vectors of Pb and probably of many other metals as well in the environment.

International audience | The nanoscale size of plastic debris makes them potential efficient vectors of many pollutants and more especially of metals. In order to evaluate this ability, nanoplastics were produced from microplastics collected on a beach exposed to the North Atlantic Gyre. The nanoplastics were characterized using multi-dimensional methods: asymmetrical flow field flow fractionation and dynamic light scattering coupled to several detectors. Lead (II) adsorption kinetics, isotherm and pH-edge were then carried out. The sorption reached a steady state after around 200 min. The maximum sorption capacity varied between 97% and 78.5% for both tested Pb concentrations. Lead (II) adsorption kinetics is controlled by chemical reactions with the nanoplastics surface and to a lesser extent by intraparticle diffusion. Adsorption isotherm modeling using Freundlich model demonstrated that NPG are strong adsorbents equivalent to hydrous ferric oxides such as ferrihydrite (log against 11.76 for NPG and ferrihydrite, respectively). The adsorption is dependent upon pH, in response to the Pb(II) adsorption by the oxygenated binding sites developed on account of the surface UV oxidation under environmental conditions. They could be able to compete with Fe or humic colloids for Pb binding regards to their amount and specific areas. Nanoplastics could therefore be efficient vectors of Pb and probably of many other metals as well in the environment.

One attraction of using hydrochar (HC) and biochar (BC) in soil is their intrinsic affinity for organic contaminants. Oxidative ageing is likely to induce changes in physicochemical properties and functionality. To explore the long-term potential trajectories for corn stalk HC and BC to adsorb organic pollutants, we employed HC and BC exposure in 5% H2O2 to simulate oxidative ageing and get insights into mechanisms of atrazine adsorption on fresh and artificially aged materials. The physicochemical properties of fresh and aged materials were systematically compared using elemental analysis, SSA, FTIR, XPS and SEM-EDS, alongside K2Cr2O7/H2SO4 treatment to assess chemical oxidation stability. Atrazine is a typical herbicide chemical and hydrophobic organic pollutant. Adsorption isotherms of atrazine were used to reveal differences in mechanisms of sorption to BC and HC, by assessment before and ageing. BC freshly produced at 650 °C displayed higher capacity for atrazine sorption than BC produced at 500 °C, with a dominant role for π-π EDA interactions. The sorption capacity of HC freshly produced at 250 °C was higher than for HC produced at 200 °C HC, owing to higher C content and atrazine partitioning into the organic phase. Ageing increased the surface abundance of oxygenated functional groups for BC and HC and diminished bulk aromaticity. After ageing, atrazine sorption by high temperature BC was lower, but for HC it was increased. Such divergent effects must be considered when developing strategies to co-manage contaminants and carbon through the addition of carbonized materials to land.

In the present study, the competitive adsorption of Cu²⁺, Pb²⁺, and Cd²⁺ by a novel natural adsorbent (i.e., argillaceous limestone) modified with chitosan (C-AL) was investigated. The results demonstrated that both intraparticle diffusion and chemisorption marked significant contributions to the Cu²⁺ adsorption process by both raw argillaceous limestone (R-AL) and C-AL in mono-metal adsorption systems. Antagonism was found to be the predominant competitive effect for Cu²⁺, Pb²⁺ and Cd²⁺ adsorptions by C-AL in the multi-metal adsorption system. The three-dimensional simulation and FTIR analysis revealed that the presence of Cu²⁺ suppressed Pb²⁺ and Cd²⁺ adsorptions, while the effect of Cd²⁺ on Cu²⁺ and Pb²⁺ adsorptions was insignificant. The spectroscopic analyses evidenced that amide groups in C-AL played a crucial role in metal adsorption. The preferential adsorptions of Pb²⁺ > Cu²⁺ > Cd²⁺ were likely due to the different affinities of the metals to the lone pair of electrons on the N atom from the amide groups and/or the O atoms from the –OH and -COO⁻ groups on C-AL. The interactions between C-AL and metal ions and between various metal species influenced their competitive adsorption behaviors. C-AL exhibited a superior metal adsorption capacity in comparison with that the capacities of other natural adsorbents reported during the last decade, suggesting its potential practical applications.

The development of high-efficiency adsorbents and the exploration of their adsorption mechanisms are major challenges in environmental remediation. Herein, MIL-100 was prepared, characterized, and utilized for the adsorptive removal of diclofenac sodium (DCF) from aqueous solutions. A high monolayer adsorption capacity of 773 mg g⁻¹ was recorded. The adsorption mechanism was proposed based on different contributions of two types of pore structure of MIL-100 to the adsorption of DCF from aqueous solutions according to the experimental results and theoretical calculation. During adsorption process, DCF (5.2 × 7.4 × 10.3 Å) diffused through the free area of hexagonal pores (8.6 × 8.6 Å) into the cages of MIL-100, whilst it was adsorbed by the pentagonal pores (4.8 × 5.8 Å) preferentially. Internal mass transfer resistance, which was identified as one of the dominant rate-limiting steps by the mass transfer resistance kinetic models based on the Sips model, will be derived from the diffusion process, which was affected by the size-sieving effect of the pore structure of MIL-100. The successful diffusion of DCF into the interior of MIL-100 and the stable configuration between MIL-100 and DCF accounted for the high adsorption capacity. The capture of DCF into MIL-100 also resulted in the pore size distribution variation of adsorbent, which provided vital experimental evidence for the proposed mechanism. This study may offer deeper insights into other pollutants removal by metal-organic frameworks type adsorbents.

The long-term use of animal manure in agriculture has resulted in estrogen pollution, which poses risks to facility vegetable soils. Owing to the complex soil composition, estrogen may exhibit a variety of behaviors at the water/soil interface. This study demonstrated the role of humic acid (HA) on the 17β-estradiol (E2) adsorption by clay minerals (montmorillonite, kaolinite, and hematite). The interfacial behaviors were investigated using adsorption kinetics and isotherms data. Then, the effects of temperature, pH, and bisphenol A (BPA) on the interactions between humic-mineral complexes and E2 were explored. The adsorption of E2 is an exothermic and spontaneous process, and the addition of HA to minerals significantly promoted their E2 adsorption capacities. Higher pH levels (>10) and the presence of BPA decreased the adsorption capacities of minerals and mineral complexes for E2. Moreover, intercalation, hydrophobic partitioning, π-π interactions and hydrogen bonding could dominate the E2 adsorption onto complexes. These results provided insight into the interfacial behaviors of E2 on the surfaces of humic-mineral complexes and promoted the understanding of the migration and transport of estrogens in soils.

Proper management of waste crop residues has been an environmental concern for years. Yellow mealworms (larvae of Tenebrio molitor Linnaeus, 1758) are major insect protein source. In comparison with normal feed wheat bran (WB), we tested five common lignocellulose-rich crop residues as feedstock to rear mealworms, including wheat straw (WS), rice straw (RS), rice bran (RB), rice husk (RH), and corn straw (CS). We then used egested frass for the production of biochar in order to achieve clean production. Except for WS and RH, the crop residues supported mealworms’ life activity and growth with consumption of the residues by 90% or higher and degraded lignin, hemicellulose and cellulose over 32 day period. The sequence of degradability of the feedstocks is RS > RB > CS > WS > RH. Egested frass was converted to biochar which was tested for metal removal including Pb(II), Cd(II), Cu(II), Zn(II), and Cr(VI). Biochar via pyrolysis at 600 °C from RS fed frass (FRSBC) showed the best adsorption performance. The adsorption isotherm fits the Langmuir model, and kinetic analysis fits the Pseudo-Second Order Reaction. The heavy metal adsorption process was well-described using the Intra-Particle Diffusion model. Complexation, cation exchange, precipitation, reduction, deposition, and chelation dominated the adsorption of the metals onto FRSBC. The results indicated that crop residues (WS, RS, RB, and CS) can be utilized as supplementary feedstock along with biochar generated from egested frass to rear mealworms and achieve clean production while generating high-quality bioadsorbent for environment remediation and soil conditioning.

Antibiotics in water and soil are persistent, bioaccumulative and toxic to aquatic organisms and human health. To address it, as one of the new technologies, green synthesized magnetic Fe₃O₄ nanoparticles by Excoecaria cochinchinensis extract used to remove rifampicin (RIF) was investigated in this study. Results showed the adsorption efficiency of RIF reached 98.4% and the maximum adsorption capacity is 84.8 mg/g when 20 mL of RIF at a concentration of 20 M was adsorbed by 10 mg Fe₃O₄ at a temperature of 303 K. The morphology of the green Fe₃O₄ characterized by SEM demonstrated the dimensions ranging from 20 to 30 nm. The N₂ adsorption/desorption isotherms revealed that the surface area of Fe₃O₄ was 111.8 m²/g. In addition, adsorption studies indicated that the kinetics fitted the pseudo second-order and isothermal adsorption conformed to the Langmuir isotherm. Furthermore, due to their magnetic properties, the Fe₃O₄ nanoparticles were easily separated and reused and the mechanism for removing RIF occurred through adsorption rather than chemical redox reaction. Finally, the reusability of Fe₃O₄ for adsorption of RIF showed that the removal efficiency decreased to 61.5% after five cycles.