Refine search
Results 1-10 of 102
Characteristics and Health Risk of BTEX at Selected Different Microenvironments in an Industrial-Urban Area, Iran
2019
Tarassoli, A. | Esmaili Sari, A. | Bahramifar, N.
The present study monitors BTEX concentration in outdoor and indoor air of eight different microenvironments during summer 2017 and winter 2018 at Asaloyeh city, Iran's energy capital. It samples BTEX compounds by charcoal tubes, analyzing the samples by means of a gas chromatograph with a flame ionization detector. According to the obtained results, outdoor concentrations of BTEX have been higher than the indoor ones, for both seasons, with the highest outdoor and indoor BTEX being 21.70 and 18.59 μg/m3, respectively. Toluene has been the most abundant substance, among the investigated BTEX in all sampling points. Based on the MIR scale, m, p-xylene is the most dominant contributor to ozone formation potential among BTEX species. Indoor to outdoor (I/O) ratios of BTEX compounds range from 0.53 to 0.88 and 0.41 to 0.77 in winter and summer, respectively. The cumulative hazard index (HI) is within an acceptable range. The LTCR value of benzene concentration, obtained, exceeds the value of 1.0E-06, recommended by USEPA. Sensitivity analysis shows that benzene concentration, exposure duration, and inhalation rate have a greater impact on health risk assessment.
Show more [+] Less [-]A spatio-temporally weighted hybrid model to improve estimates of personal PM2.5 exposure: Incorporating big data from multiple data sources
2019
Ben, YuJie | Ma, FuJun | Wang, Hao | Hassan, Muhammad Azher | Yevheniia, Romanenko | Fan, WenHong | Li, Yubiao | Dong, ZhaoMin
An accurate estimation of population exposure to particulate matter with an aerodynamic diameter <2.5 μm (PM₂.₅) is crucial to hazard assessment and epidemiology. This study integrated annual data from 1146 in-home air monitors, air quality monitoring network, public applications, and traffic smart cards to determine the pattern of PM₂.₅ concentrations and activities in different microenvironments (including outdoors, indoors, subways, buses, and cars). By combining massive amounts of signaling data from cell phones, this study applied a spatio-temporally weighted model to improve the estimation of PM₂.₅ exposure. Using Shanghai as a case study, the annual average indoor PM₂.₅ concentration was estimated to be 29.3 ± 27.1 μg/m³ (n = 365), with an average infiltration factor of 0.63. The spatio-temporally weighted PM₂.₅ exposure was estimated to be 32.1 ± 13.9 μg/m³ (n = 365), with indoor PM₂.₅ contributing the most (85.1%), followed by outdoor (7.6%), bus (3.7%), subway (3.1%), and car (0.5%). However, considering that outdoor PM₂.₅ makes a significant contribution to indoor PM₂.₅, outdoor PM₂.₅ was responsible for most of the exposure in Shanghai. A heatmap of PM₂.₅ exposure indicated that the inner-city exposure index was significantly higher than that of the outskirts city, which demonstrated that the importance of spatial differences in population exposure estimation.
Show more [+] Less [-]Characteristics of air pollutants inside and outside a primary school classroom in Beijing and respiratory health impact on children
2019
Zhang, Lulu | Morisaki, Hiroshi | Wei, Yongjie | Li, Zhigang | Yang, Lu | Zhou, Quanyu | Zhang, Xuan | Xing, Wanli | Hu, Min | Shima, Masayuki | Toriba, Akira | Hayakawa, Kazuichi | Tang, Ning
This study investigated the spatial and temporal distributions of particulate and gaseous air pollutants in a primary school in Beijing and assessed their health impact on the children. The results show that air quality inside the classroom was greatly affected by the input of outdoor pollutants; high levels of pollution were observed during both the heating and nonheating periods and indicate that indoor and outdoor air pollution posed a threat to the children's health. Traffic sources near the primary school were the main contributors to indoor and outdoor pollutants during both periods. Moreover, air quality in this primary school was affected by coal combustion and atmospheric reactions during the heating and nonheating periods, respectively. Based on the estimation by exposure-response functions and the weighting of indoor and outdoor pollutants during different periods, the levels of PM2.5, PM 10 and O3 at school had adverse respiratory health effects on children. Longer exposures during the nonheating period contributed to higher health risks. These results emphasized that emission sources nearby had a direct impact on air quality in school and children's respiratory health. Therefore, measures should be taken for double control on air pollution inside and outside the classroom to protect children from it.
Show more [+] Less [-]A new method to measure real-world respiratory tract deposition of inhaled ambient black carbon
2019
Madueño, Leizel | Kecorius, Simonas | Löndahl, Jakob | Müller, Thomas | Pfeifer, Sascha | Haudek, Andrea | Mardoñez, Valeria | Wiedensohler, Alfred
In this study, we present the development of a mobile system to measure real-world total respiratory tract deposition of inhaled ambient black carbon (BC). Such information can be used to supplement the existing knowledge on air pollution-related health effects, especially in the regions where the use of standard methods and intricate instrumentation is limited. The study is divided in two parts. Firstly, we present the design of portable system and methodology to evaluate the exhaled air BC content. We demonstrate that under real-world conditions, the proposed system exhibit negligible particle losses, and can additionally be used to determine the minute ventilation. Secondly, exemplary experimental data from the system is presented. A feasibility study was conducted in the city of La Paz, Bolivia. In a pilot experiment, we found that the cumulative total respiratory tract deposition dose over 1-h commuting trip would result in approximately 2.6 μg of BC. This is up to 5 times lower than the values obtained from conjectural approach (e.g. using physical parameters from previously reported worksheets). Measured total respiratory tract deposited BC fraction varied from 39% to 48% during walking and commuting inside a micro-bus, respectively.To the best of our knowledge, no studies focusing on experimental determination of real-world deposition dose of BC have been performed in developing regions. This can be especially important because the BC mass concentration is significant and determines a large fraction of particle mass concentration. In this work, we propose a potential method, recommendations, as well as the limitations in establishing an easy and relatively cheap way to estimate the respiratory tract deposition of BC.
Show more [+] Less [-]Satellite-derived PM2.5 concentration trends over Eastern China from 1998 to 2016: Relationships to emissions and meteorological parameters
2019
Gui, Ke | Che, Huizheng | Wang, Yaqiang | Wang, Hong | Zhang, Lei | Zhao, Hujia | Zheng, Yu | Sun, Tianze | Zhang, Xiaoye
Fine particulate matter (PM₂.₅) pollution in Eastern China (EC) has raised concerns due to its adverse effects on air quality, climate, and human health. This study investigated the long-term variation trend in satellite-derived PM₂.₅ concentrations and how it was related to pollutant emissions and meteorological parameters over EC and seven regions of interest (ROIs) during 1998–2016. Over EC, the annual mean PM₂.₅ increased before 2006 due to the enhanced emissions of primary PM₂.₅, NOₓ and SO₂, but decreased with the reduced SO₂ emissions after 2006 evidently in response to China's clean air policies. In addition, results from statistical analyses indicated that in the North China Plain (NCP), Northeast China (NEC), Sichuan Basin (SCB) and Central China (CC) planetary boundary layer height (PBLH) was the dominant meteorological driver for the PM₂.₅ decadal changes, and in the Pearl River Delta (PRD) wind speed is the leading factor. Overall, the variation in meteorological parameters accounted for 48% of the variances in PM₂.₅ concentrations over EC. The population-weighted PM₂.₅ over EC increased from 36.4 μg/m³ in 1998–2004 (P1) to 49.4 μg/m³ in 2005–2010 (P2) then decreased to 46.5 μg/m³ in 2011–2016 (P3). In the NCP and NEC, the percentages of the population living above the World Health Organization (WHO) Interim Target-1 (IT-1, 35 μg/m³) have risen steadily over the past 20 yr, reaching maxima of 97.3% and 78.8% in P3, respectively, but decreases of ∼30% from P2 to P3 were found for the SCB and PRD.
Show more [+] Less [-]Aromatic acids as biomass-burning tracers in atmospheric aerosols and ice cores: A review
2019
Wan, Xin | Kawamura, Kimitaka | Ram, Kirpa | Kang, Shichang | Loewen, Mark | Gao, Shaopeng | Wu, Guangming | Fu, Pingqing | Zhang, Yanlin | Bhattarai, Hemraj | Cong, Zhiyuan
Biomass burning (BB) is one of the largest sources of carbonaceous aerosols with adverse impacts on air quality, visibility, health and climate. BB emits a few specific aromatic acids (p-hydroxybenzoic, vanillic, syringic and dehydroabietic acids) which have been widely used as key indicators for source identification of BB-derived carbonaceous aerosols in various environmental matrices. In addition, measurement of p-hydroxybenzoic and vanillic acids in snow and ice cores have revealed the historical records of the fire emissions. Despite their uniqueness and importance as tracers, our current understanding of analytical methods, concentrations, diagnostic ratios and degradation processes are rather limited and scattered in literature. In this review paper, firstly we have summarized the most established methods and protocols for the measurement of these aromatic acids in aerosols and ice cores. Secondly, we have highlighted the geographical variability in the abundances of these acids, their diagnostic ratios and degradation processes in the environments. The review of the existing data indicates that the concentrations of aromatic acids in aerosols vary greatly with locations worldwide, typically more abundant in urban atmosphere where biomass fuels are commonly used for residential heating and/or cooking purposes. In contrast, their concentrations are lowest in the polar regions which are avoid of localized emissions and largely influenced by long-range transport. The diagnostic ratios among aromatic acids can be used as good indicators for the relative amounts and types of biomass (e.g. hardwood, softwood and herbaceous plants) as well as photochemical oxidation processes. Although studies suggest that the degradation processes of the aromatic acids may be controlled by light, pH and hygroscopicity, a more careful investigation, including closed chamber studies, is highly appreciated.
Show more [+] Less [-]Biotoxicity of water-soluble species in PM2.5 using Chlorella
2019
Yang, Liu | Duan, Fengkui | Tian, Hua | He, Kebin | Ma, Yongliang | Ma, Tao | Li, Hui | Yang, Shuo | Zhu, Lidan
China has been faced with severe haze pollution, which is hazardous to human health. Among the air pollutants, PM2.5 (particles with an aerodynamic diameter ≤ 2.5 μm) is the most dangerous because of its toxicity and impact on human health and ecosystems. However, there has been limited research on PM2.5 particle toxicity. In the present study, we collected daily PM2.5 samples from January 1 to March 31, 2018 and selected samples to extract water-soluble species, including SO42−, NO3−, WSOC, and NH4+. These samples represented clean, good, slight, moderate, and heavy pollution days. After extraction using an ultrasonic method, PM2.5 solutions were obtained. We used Chlorella as the test algae and studied the content of chlorophyll a, as well as the variation in fluorescence when they were placed into the PM2.5 extraction solution, and their submicroscopic structure was analyzed using transmission electron microscopy (TEM). The results showed that when the air quality was relatively clean and good (PM2.5 concentration ≤ 75 μg m−3), the PM2.5 extraction solutions had no inhibiting effects on Chlorella, whereas when the air quality was polluted (PM2.5 concentration > 75 μg m−3) and heavily polluted (PM2.5 concentration > 150 μg m−3), with increasing PM2.5 concentrations and exposure time, the chlorophyll a content in Chlorella decreased. Moreover, the maximum photochemical quantum yield (Fv/Fm) of Chlorella obviously decreased, indicating chlorophyll inhibition during polluted days with increasing PM2.5 concentrations. The effects on the chlorophyll fluorescence parameters were also obvious, leading to an increase of energy dissipated per unit reaction center (DIo/RC), suggesting that Chlorella could survive when exposed to PM2.5 solutions, whereas the physiological activities were significantly inhibited. The TEM analysis showed that there were few effects on Chlorella cell microstructure during clean days, whereas plasmolysis occurred during light- and medium-polluted days. With increasing pollution levels, plasmolysis became more and more apparent, until the organelles inside the cells were thoroughly destroyed and most of the parts could not be recognized.
Show more [+] Less [-]Urban vegetation and particle air pollution: Experimental campaigns in a traffic hotspot
2019
Gómez-Moreno, F.J. | Artíñano, B. | Ramiro, EDíaz | Barreiro, M. | Núñez, L. | Coz, E. | Dimitroulopoulou, C. | Vardoulakis, S. | Yagüe, C. | Maqueda, G. | Sastre, M. | Román-Cascón, C. | Santamaría, J.M. | Borge, R.
This work presents the main results of two experimental campaigns carried out in summer and winter seasons in a complex pollution hotspot near a large park, El Retiro, in Madrid (Spain). These campaigns were aimed at understanding the microscale spatio-temporal variation of ambient concentration levels in areas with high pollution values to obtain data to validate models on the effect of urban trees on particulate matter concentrations.Two different measuring approaches have been used. The first one was static, with instruments continuously characterizing the meteorological variables and the particulate matter concentration outside and inside the park. During the summer campaign, the particulate matter concentration was clearly influenced by a Saharan dust outbreak during the period 23 June to 10 July 2016, when most of the particulate matter was in the fraction PM₂.₅₋₁₀. During the winter campaign, the mass concentrations were related to the meteorological conditions and the high atmospheric stability.The second approach was a dynamic case with mobile measurements by portable instruments. During the summer campaign, a DustTrak instrument was used to measure PM₁₀ and PM₂.₅ in different transects close to and inside the park at different distances from the traffic lane. It was observed a decrease in the concentrations up to 25% at 20 m and 50% at 200 m. High PM₁₀ values were linked to dust resuspension caused by recreational activities and to a Saharan dust outbreak. The highest PM values were measured at the Independencia square, an area with many bus stops and high traffic density. During the winter campaign, three microaethalometers were used for Black Carbon measurement. Both pollutants also showed a reduction in their concentrations when moving towards inside the park. For PM₁₀ and PM₂.₅, reductions up to 50% were observed, while for BC this reduction was smaller, about 20%.
Show more [+] Less [-]New insight of ozone pollution impact from flare emissions of chemical plant start-up operations
2019
Ge, Sijie | Zhang, Jian | Wang, Sujing | Xu, Qiang | Ho, Thomas
Flaring is a common and necessary operation for chemical industries, which is designed to manage dangerous process overpressure scenarios or to release and destroy off-spec products during chemical plant upsets or turnarounds. However, excessive flaring can emit large quantities of VOCs and NOx into the atmosphere, which will cause transient and localized ozone pollution events in the presence of sunlight. The objective of this study was to quantify the impact to regional air-quality due to flare emissions from chemical plant start-up operations through the coupling of dynamic process simulations via Aspen Plus and air-quality simulations via CAMx. Simulation results from case studies have indicated that the corresponding ozone increments can vary significantly from 0.2 ppb to 17.8 ppb under different temporal and spatial factors, including the start-up starting hour, starting day, and plant location. Additional ozone sensitivity simulations have also indicated that the corresponding ozone increments are higher when the plant is located in a VOC-limited area than that in a NOx-limited area. The results from this study have delivered a cost-effective air-quality control practice for plant start-ups with a minimum air-quality impact through selecting the optimal starting time within the allowable ranges. The practice has significant potential to benefit all stakeholders, including environmental agencies, chemical industries, and local communities.
Show more [+] Less [-]Dispersion-box modeling investigation of the influences of gasoline, diesel, M85 and E85 vehicle exhaust emission on photochemistry
2019
Gabay, Maor | Tas, Eran
Alternative transportation fuels (ATFs) can reduce air pollution. However, the influence of conventional fuels—diesel and gasoline, and particularly ATFs on photochemical air pollution is not well-characterized, limiting assessments of ATFs and air quality. This is mainly due to frequent use of lumped chemical mechanisms by related atmospheric modeling. Here we hypothesized that applying a chemical mechanism that is specifically developed according to both emission fractions and photochemical ozone creation potential of volatile organic compounds (VOCs) is key to gaining reliable insights into the impact of transportation fuels on photochemistry. We used a heterogeneous chemical mechanism with 927 reactions and relatively detailed emission inventories to specifically meet the requirements for reliable simulation of the effect of exhaust emissions from vehicles fueled by selected model fuels—diesel, gasoline, and mixtures of 15% gasoline with 85% ethanol (E85) or 85% methanol (M85)—on photochemistry. These dispersion-box model simulations revealed a strong influence of atmospheric background balance between VOCs and nitrogen oxides (NOX = [NO] + [NO2]) on the impact of exhaust emissions on photochemistry, with higher tendency toward ozone (O3) formation or destruction for more VOC-limited or NOX-limited conditions, respectively. Accordingly, higher [NOX]/[VOC] exhaust emission, such as from diesel and M85, resulted in lower O3, not only locally but also downwind of the emission. This offers a new perspective and measure for transportation fuel assessment. Rapid conversion of O3 to hydroxyl and hydroperoxyl radicals downwind of the exhaust emission indicates the importance of simulating the impact of road transportation on photochemistry at high spatial and temporal resolution. Peroxyacetyl nitrate formation was more sensitive to VOC emission under VOC-limited conditions than to NOX emission under NOX-limited conditions. Secondary formaldehyde dominated over primary emitted formaldehyde several minutes after emission. These findings should be verified using a 3D modeling study under varying meteorological conditions.
Show more [+] Less [-]