Aquatic plant biomass like Iris pseudacorus can be used as electron donor to improve denitrification performance in subsurface constructed wetlands. However, the phenomenon that the nitrogen removal rate declined in the terminal stage restricted the utilization of litters. In terms of this problem, this study investigated the performance of the used biomass through alkali treatment on nitrogen removal and analyzed the effect of alkali treatment on the component and structure of biomass and microbial community. The results showed that the alkali-treated biomass could further enhance the nitrogen removal by nearly 15% compared with used ones. The significant damage of cell walls and compact fibers containing cellulose and lignin through alkali treatment mainly resulted in the improvement of carbon release and nitrogen removal. With the addition of alkali-treated biomass, the richness index of microbes was higher compared with other biomass materials. Furthermore, the abundance of denitrification related genera increased and the abundance of genera for nitrification was maintained. Based on these finds, a mode of a more efficient Iris pseudacorus self-consumed subsurface flow constructed wetlands was designed. In this mode, the effluent total nitrogen could be stabilized below 5 mg L⁻¹ for nine months and the weight of litters could be further cut down by 75%. These findings would contribute to efficient utilization of plant biomass for nitrogen removal enhancement and final residue reduction in the wetlands.

Catalytic pyrolysis is a promising chemical recycling technology to supplement mechanical recycling since plastics can be broken down into monomers or converted to the required fuels and chemicals. In this study, a microwave (MW) -responsive SiC foam@zeoltie core-shell structured catalyst was proposed for the catalytic pyrolysis of polyolefins. Under microwave irradiation, the SiC foam core works as both microwave adsorber and catalyst support, thus concentrating the generated heat energy on the ZSM-5 zeolite shell, where the catalytic reaction takes place. SiC foam with an open cellular structure can also improve the global transport of mass and heat during plastics pyrolysis. In this work, the effects of the SiO₂/Al₂O₃ ratio and alkaline treatment of ZSM-5 zeolite coated SiC foam under MW irradiation on the variations in product distribution from low-density polyethylene (LDPE) pyrolysis were investigated at 450 °C. The results indicated that the appropriate acidity and pore structure were crucial to upgrading gas and liquid products. Particularly, the creation of a mesoporous structure in ZSM-5 zeolite via alkaline treatment could improve the diffusion of large molecules and products, thus significantly increasing the selectivity of high-valued light olefins and aromatics while inhibiting the formation of unwanted alkanes, which are expected in the chemical industry. Concretely, the concentration of olefins in gas increased to 51.0 vol% for ZSM-5(50)-0.25AT, and 65.6 vol% for ZSM-5 (50)-0.50AT, compared with 45.2 vol% for the parent ZSM-5(50). The relative concentration of aromatics in liquid decreased from 96.6% for ZSM-5(50) to 75.9% for ZSM-5(50)-0.25AT, and 71.1% for ZSM-5(50)-0.50AT. Given the respective yield of gas and liquid, the total selectivity of C2–C4 olefins and aromatics for mesoporous ZSM-5 zeolites could reach 58.6–64.9% during LDPE pyrolysis, which were higher than that for the parent ZSM-5 zeolite.

Phosphatization of ZnO nanoparticles (ZNPs) at various pHs and its influence on subsequent lead sorption were investigated. Results showed that, in presence of phosphate, both the chemical speciation and crystalline phase of ZNPs were pH dependent that most of them were converted to crystalline Zn3(PO4)2 at acidic pHs, but only little amorphous hopeites can be formed under alkaline condition. Phosphatization process significantly enhanced subsequent lead sorption with the order of acidic process > alkaline > pristine ZNPs. Spectroscopic analysis including ATR-FTIR and XPS revealed main mechanisms of lead phosphate precipitation and inner-sphere complexes for lead sorption on acidic and alkaline treatment products, respectively. The potential toxicity of ZNPs and heavy metals in eutrophic aquatic ecosystems would thus be reduced due to the ubiquitous phosphatization process. This study highlights the importance of environmental variables in exploring the environmental behavior and fate of heavy metals as well as nanoparticles in natural waters.

Sewage sludge, a common by-product of wastewater treatment plants, is one important repository of antibiotic resistance genes (ARGs). The growing demands of sewage sludge reclamation, such as land application, increase the possibility of introducing ARGs into the environment and even the further dissemination of antibiotic resistance. Previous studies have paid much attention to the removal efficiencies of conventional pollutants such as heavy metals and pathogenic microorganisms during the sludge treatment processes. However, the effects on the abundance and diversity of ARGs got great concerns only recently. This paper mainly focuses on the enrichment and transmission modes of ARGs in sludge and the effects of representative sludge treatment technologies on ARG distributions in sludge. It seems that most physical and chemical techniques such as microwave, alkali treatment, and coagulation are ineffective in ARG reduction. The impacts of biological sludge treatment technologies on ARGs are varied, probably because of the diverse microbial community structures, operational parameters, and even environmental factors such as rainwater. Therefore, the sensitivities of potential hosts of specific ARG to the sludge treatments should determine the abundance of ARG before and after treatment. In addition, a reasonable combination of different sludge process techniques is usually a better choice than the single one for ARGs’ removal due to its better ability to efficiently damage the embedded cells and directly degrade the released ARGs. In summary, the appropriate treatment techniques should be applied on the excess sewage sludge to help mitigate the release of ARGs to the environment.

Alkaline pretreatment (APT) is the promising disintegration pretreatment for the anaerobic digestion (AD) of sewage sludge (SS) to improve digestion efficiency and methane yields. In this study, the heavy metals (HMs) were observed to be leached from SS in the APT process, which could lower the HMs secondary pollution risk of the residual biosolids after AD in land application. The sequential chemical extraction (SCE) experiment was performed to determine the variation in HMs’ distribution prior to and after the APT. The alkaline extracts were characterized in order to elucidate the HMs’ release mechanism. The APT could cause significant release of Zn and Cu with a maximum release efficiency of 96.6% ± 4.6% and 62.7% ± 8.4% under the condition of 1.5 mol/L NaOH and 25 ℃, respectively. The release efficiency of Zn and Cu was reduced by 63.0% and 21.7%, respectively, due to the extra addition of 0.25 mol/L NaCl at a NaOH concentration of 1.25 mol/L in the APT process. The release of Zn and Cu may be attributed to a complex process including disruption of microbial cells in SS, solubilization of organic matters bounded with metals, and the chemical leaching reaction of minerals. This study demonstrates the possibility to remove the Zn and Cu from the SS in the APT process before the AD disposal.

The present study investigated the effect of thermo-chemical pretreatment on the enhancement of enzymatic digestibility of olive mill stones (OMS), as well as its possible valorisation via bioconversion of the generated free sugars to alcohols. Specifically, the influence of parameters such as reaction time, temperature, type and concentration of dilute acids and/or bases, was assessed during the thermo-chemical pretreatment. The hydrolysates and the solids remaining after pretreatment, as well as the whole pretreated slurries, were further evaluated as potential substrates for the simultaneous production of ethanol and xylitol via fermentation with the yeast Pachysolen tannophilus. The digestibility and overall saccharification of OMS were considerably enhanced in all cases, with the maximum enzymatic digestibility observed for dilute sodium hydroxide (almost 4-fold) which also yielded the highest total saccharification yield (91% of the total OMS carbohydrates). Ethanol and xylitol yields from the untreated OMS were 28 g/kg OMS and 25 g/kg OMS, respectively, and were both significantly enhanced by pretreatment. The highest ethanol yield was 79 g/kg OMS and was achieved by the alkali pretreatment and separate fermentation of hydrolysates and solids, whereas the highest xylitol yield was 49 g/kg OMS and was obtained by pretreatment with sulphuric acid and separate fermentation of hydrolysates and solids.

Camphor leaf (CL) was widely used to extract camphor oil and thus led to abundant forestry waste. In order to reduce pollution, the waste CL was used to prepare bio-adsorbent for Pb(II) removal after alkali treatment and functional modification. The effects of solution pH, initial Pb(II) concentration, contact time and solution temperature were investigated on adsorption process to evaluate the potential application in heavy metal ions’ removal. It was found that the massive hydroxyl groups released and plenty of micro-pores formed after the alkali treatment of CL bio-adsorbent, which obviously increased the Pb(II) adsorption. And the adsorption performance promoted continually after further functional modification by ionized 1,2,3,4-butanetetracarboxylic acid (BTCA). The increase of pH was favourable for the adsorption even though the precipitation effect was deducted. Linear fitting method was more suitable to describe the adsorption process than nonlinear fitting method, including adsorption isotherms and adsorption kinetics research. The adsorption thermodynamics was better to be described by nonlinear fitting method due to its lower root mean square error (RMSE) value and higher R² value. Among which, the adsorption isotherm and adsorption kinetics were fitted well to Langmuir model and pseudo-second-order model, respectively. The adsorption thermodynamics was exothermic in nature and the process was spontaneous at low solution temperature. The adsorption mechanism was revealed as the combination of dominant chemical adsorption and assistant physical adsorption.

In this study, activated carbons were prepared from bamboo via carbonization and successive KOH activation by tuning the post-treatment procedure. The resultant carbons possessed high surface area, high oxygen doping, and 3D hierarchical porous structure with interconnected micro-, meso- and macropores. These features resulted in ultra-excellent adsorption capacity for rhodamine B (> 1200 mg/g). Furthermore, the kinetic and isotherm experimental data were best described by pseudo-second kinetic model and Langmuir isotherm model, respectively. The adsorption of RhB onto the as-synthesized carbons was a spontaneous endothermic process. The π–π stacking, hydrogen bond, and acid-base interaction were proposed to account for the adsorption mechanism. Moreover, SiO₂ in bamboo-based carbon functioned as frameworks and its removal via alkali treatment led to the collapse of porous structure, decreasing surface area, pore volume, and O heteroatom doping, consequently dropping the adsorption performance. Overall, bamboo as an abundant and renewable biomass could be considered as a potential precursor for the production of excellent adsorbent for wastewater purification.

Iron-incorporated silica (Fe/SiO₂) with different Fe/Si molar ratio was successfully prepared from rice husk pyrolytic residues (RHR) through alkali pretreatment, co-precipitation, and calcination. Various characterization methods indicated that the Fe/SiO₂ samples possessed mesoporous structure with Fe species incorporated into the framework of silica. The obtained materials were applied in the treatment of hazardous banknote printing wastewater, and under the optimal conditions, colored pollutants, humic acid-like and soluble microbial by-product-like organics were removed significantly. It was found that Fe/SiO₂ acted as both flocculant and catalyst, and the framework iron species catalyzed the oxidative degradation of refractory organics in the presence of H₂O₂. A heterogeneous Fenton-like system was formed in the wastewater treatment process.

This study investigated the biogas production and dewaterability of sewage sludge with alkaline pretreatment at mesophilic and thermophilic temperatures. The total suspended solids (TSS) and volatile suspended solids (VSS) of raw sludges were 21.1 ± 2.3 and 16.2 ± 1.5 g L⁻¹, respectively. Raw sludges were pretreated at uncontrolled, pH 8, pH 10, and pH 12 under mesophilic (Mu, M8, M10, and M12) and thermophilic (Tu, T8, T10, and T12) conditions, respectively. All the pretreatments last 6 days. The pH of pretreated sludges was adjusted to the pH 7.0 prior to inoculating with mesophilic anaerobic digested sludge and undergoing 60 days of anaerobic digestion. The ultimate biogas yield of Mu, M8, M10, M12, Tu, T8, T10, and T12 was 296.8, 384.8, 339.9, 323.1, 376.6, 322.4, 271.5, and 258.1 mL g⁻¹-VSₐddₑd, respectively. Both the pH of alkali treatment and temperature of thermal treatment affect the performance of anaerobic digestion. High hydrolysis pH (pH 10 and pH 12) resulted in high Na⁺ concentration (over 4000 mg L⁻¹), and Na⁺ inhibitory effect reduced the ultimate biogas yield. The normalized capillary suction time (NCST) found in the treatments of M8 and Tu were 11.8 ± 1.1 to 23.4 ± 1.7 and 27.9 ± 5.4 to 111.8 ± 1.7 s g⁻¹-TSS, respectively. The results suggest that both the pH of alkali treatment and temperatures of mild thermal treatment affect the performance of anaerobic digestion and sludge pretreated at pH 8.0 under mesophilic conditions could achieve high biogas yield and adequate dewaterability of digested sludge.