This study investigated particulate matter (PM) loading rates and concentrations in ambient air from naturally ventilated dairy barns and also the influences of pertinent meteorological factors, traffic, and animal activities on mass loading rates and mass concentrations. Generally, relationships between PM2.5 concentration and these parameters were significantly poorer than those between the PM loading rate and the same parameters. Although ambient air PM2.5 loading rates correlated well with PM2.5 emission rates, ambient air PM2.5 concentrations correlated poorly with PM2.5 concentrations in the barns. A comprehensive assessment of PM2.5 pollution in ambient air, therefore, requires both mass concentrations and mass loading rates. Emissions of PM2.5 correlated strongly and positively with wind speed, temperature, and solar radiation (R2 = 0.84 to 0.99) and strongly but negatively with relative humidity (R2 = 0.93). Animal activity exhibited only moderate effect on PM2.5 emissions, while traffic activity did not significantly affect PM2.5 emissions.

Fourteen metal/metalloid elements and sixteen polycyclic aromatic hydrocarbons (PAHs) within biochars were quantified to investigate how heat treatment temperatures (HTTs) and feedstocks affect their concentration and composition. Concentrations and composition of metals/metalloids were strongly dependent upon feedstocks rather than HTTs. HTTs significantly affected concentrations and composition of PAHs. The highest concentration of PAHs was observed for plant residue-derived biochars (PLABs) produced at 450 °C and the opposite result was for animal waste-derived bichars. High mineral content was responsible for depolymerization of organic matter (OM), which facilitated high production of PAHs. High HTTs pyrolysis or combustion PAHs (COMB) of PLABs possibly blocks their micropores derived from other components within OM and leads to a decline of CO2-surface areas (CO2-SAs). Concentration of ∑COMB or individual PAH was affected by biochar properties, including composition and contents of functional groups, ash content, and CO2-SAs. PLABs produced at 600 °C were recommended for low toxicity.

Intensive mariculture results in a rise in nutrient concentrations, then leads to serious eutrophication in coastal waters. Based on the sampling data obtained between August 2012 and July 2013, the eutrophication status in Yantian Bay was assessed, and the proportion of marine animals co-cultured with seaweeds was evaluated. The nutritional quality index (NQI) ranged from 4.37 to 13.20, indicating serious eutrophication conditions. The annual average ratio of nitrogen/phosphorus (N/P) was 25.19, indicating a nitrogen surplus in this system. DIN was selected as the best parameter to balance seaweed absorption and marine animal DIN production. Gracilaria lemaneiformis and Laminaria japonica were selected as co-cultured seaweeds. The optimal proportion of G. lemaneiformis production was assessed as 20074.14 tonnes. The optimal proportion of L. japonica production was evaluated as 15890.68 tonnes. High-temperature adapted seaweeds should be introduced for removing nutrients releasing by farmed aquatic animals in the summer in Yantian Bay.

Solar Photo-Fenton reaction, using FeSO₄ and H₂O₂, is an effective and energy-efficient advanced oxidation process (AOP) for degradation of pesticides. However, a major environmental concern is whether the net toxicity after the photo-Fenton process is within the tolerance limit of the aquatic plants and animals, since the unreacted pesticide and Fenton’s reagent may impart additional toxicity to the treated water. Here, we report the oxidative removal of dichlorvos pesticide in wastewater by solar photo-Fenton reaction along with the residual toxicity analysis of the treated water on an aquatic alga. It was found that at pH 3, dichlorvos, with an initial concentration of 6.9 × 10⁻⁵ mol L⁻¹, was observed to be fully degraded within a batch time of 120 min, though the corresponding reduction of chemical oxygen demand (COD) was about 53 % signifying incomplete mineralisation. In order to predict the transient concentration profiles of dichlorvos under different initial concentrations, a four-parameter mathematical model was formulated. Additionally, the resultant toxicity was also examined using a model blue-green alga Nostoc sp. Compared to the raw wastewater, the net biomass of chlorophyll-a was found to increase significantly. Respective estimate of the protein concentration also indicated the same trend. Therefore, sunlight-assisted photo-Fenton process may be regarded as an effective and safe technique for the treatment of pesticide-contaminated agricultural wastewater.

Roxarsone (ROX), a world widely used feed organoarsenic additive in animal production, can be excreted as itself and its metabolites in animal manure. Animal manure is commonly land applied with phosphorous (P) fertilizer to enhance the P phytoavailability in agriculture. We investigated the accumulation of As species in garland chrysanthemum (C. coronarium) plants fertilized with 1 % (w/w, manure/soil) chicken manure bearing ROX and its metabolites, plus 0, 0.05, 0.1, 0.2, 0.4, and 0.8 g P₂O₅/kg, respectively. The results show that As(III) was the sole As compound in garland chrysanthemum shoots, and As(III) and As(V) were detectable in roots. Elevated phosphate level supplied more As(V) for garland chrysanthemum roots through competitive desorption in rhizosphere, leading to significantly enhanced accumulation of As species in plants. As(III) was the predominant As form in plants (85.0∼90.6 %). Phosphate could not change the allocation of As species in plants. Hence, the traditional practice that animal manure is applied with P fertilizer may inadvertently increase the potential risk of As contamination in crop via the way ROX → animal → animal manure → soil → crop.

Heavy metals, which have severe toxic effects on plants, animals, and human health, are serious pollutants of the modern world. Remediation of heavy metal pollution is utmost necessary. Among different approaches used for such remediation, phytoremediation is an emerging technology. Research is in progress to enhance the efficiency of this plant-based technology. In this regard, the role of rhizospheric and symbiotic microorganisms is important. It was assessed by enumeration of data from the current studies that efficiency of phytoremediation can be enhanced by assisting with diazotrophs. These bacteria are very beneficial because they bring metals to more bioavailable form by the processes of methylation, chelation, leaching, and redox reactions and the production of siderophores. Diazotrophs also posses growth-promoting traits including nitrogen fixation, phosphorous solubilization, phytohormones synthesis, siderophore production, and synthesis of ACC-deaminase which may facilitate plant growth and increase plant biomass, in turn facilitating phytoremediation technology. Thus, the aim of this review is to highlight the potential of diazotrophs in assisting phytoremediation of heavy metals in contaminated soils. The novel current assessment of literature suggests the winning combination of diazotroph with phytoremediation technology.

Lake Cerknica is a periodically intermittent lake which may extend its surface up to 26 km² and reach 80 km³ in volume. Lakes tend to age over time. Lake Cerknica does not possess properties of a real lake or those of usual wetlands thus making all of its physical, chemical, and biological processes unique. The feature with the greatest impact on plant development and animal life is the alternating nature of the lake where water from the lake is drained through the lake’s bottom dries and refloods. Lake Cerknica was compared with a plant-based water treatment system and a sequential reactor with an approximately 6-month filling and emptying cycle. Lake Cerknica’s basic processes of nutrient purification are the deposition of suspended nutrients on the lake bottom, integration of nutrients in plants, and partial denitrification.

Hexabromocyclododecane (HBCDD), as one of the most widely used brominated flame retardants (BFRs), is of great concern globally because of its persistence in the environment and negative impacts on humans and animals. HBCDD has been mainly used in flame-retarded expanded (EPS) and extruded (XPS) polystyrene foams for insulation in the construction industry. Most of these products will become a part of the construction and demolition (C&D) waste at the end of their life cycle (30–50 years) which is typically disposed of into landfills or incineration. However, the recycling of this material takes quite a low share compared with landfill and incineration. Consequently, high environmental risks will exist in these disposal approaches due to the HBCDD in C&D waste. Currently, XPS or EPS products containing HBCDD in the construction industry have not reached the end of their life cycle in most countries. Relatively little attention has been paid to this emergency issue by either the government or public. Furthermore, C&D waste is most likely disposed of by direct dumping, simple stacking, or open burning in developing countries. Therefore, this paper highlights the global environmental risks of HBCDD from C&D waste. Areas of research for key problems of HBCDD contained in C&D waste are suggested to help control and finally eliminate the impact.

Geographical variation in chemical tolerance within a species can significantly influence results of whole animal bioassays, yet a literature survey showed that the majority of articles using bioassays did not provide detail on the original field collection site of their test specimens confounding the ability for accurate replication and comparison of results. Biological variation as a result of population-specific tolerance, if not addressed, can be misinterpreted as experimental error. Our studies of two marine copepod species, Tigriopus japonicus and Tigriopus californicus, found significant intra- and inter-specific variation in tolerance to copper and tributyltin. Because both species tolerate copper concentrations orders of magnitude higher than those found in coastal waters, difference in copper tolerance may be a by-product of adaptation to other stressors such as high temperature. Controlling for inter-population tolerance variation will greatly strengthen the application of bioassays in chemical toxicity tests.

Rarely is it possible to obtain absolute numbers in free-ranging populations and although various direct and indirect methods are used to estimate abundance, few are validated against populations of known size. In this paper, we apply grounding, calibration and verification methods, used to validate mathematical models, to methods of estimating relative abundance. To illustrate how this might be done, we consider and evaluate the widely applied passive tracking index (PTI) methodology. Using published data, we examine the rationality of PTI methodology, how conceptually animal activity and abundance are related and how alternative methods are subject to similar biases or produce similar abundance estimates and trends. We then attune the method against populations representing a range of densities likely to be encountered in the field. Finally, we compare PTI trends against a prediction that adjacent populations of the same species will have similar abundance values and trends in activity. We show that while PTI abundance estimates are subject to environmental and behavioural stochasticity peculiar to each species, the PTI method and associated variance estimate showed high probability of detection, high precision of abundance values and, generally, low variability between surveys, and suggest that the PTI method applied using this procedure and for these species provides a sensitive and credible index of abundance. This same or similar validation approach can and should be applied to alternative relative abundance methods in order to demonstrate their credibility and justify their use.