PM2.5 pollution is an environmental issue caused by multiple natural and socioeconomic factors, presenting with significant spatial disparities across mainland China. However, the determinant power of natural and socioeconomic factors and their interactive impact on PM2.5 pollution is still unclear. In the study, the GeogDetector method was used to quantify nonlinear associations between PM2.5 and potential factors. This study found that natural factors, including ecological environments and climate, were more influential than socioeconomic factors, and climate was the predominant factor (q = 0.56) in influencing PM2.5 pollution. Among all interactions of the six influencing factors, the interaction of industry and climate had the largest influence (q = 0.66). Two recognized major contaminated areas were the Tarim Basin in the northwest region and the eastern plain region; the former was mainly influenced by the warm temperate arid climate and desert, and the latter was mainly influenced by the warm temperate semi-humid climate and multiple socioeconomic factors. The findings provided an interpretation of the influencing mechanisms of PM2.5 pollution, which can contribute to more specific policies aimed at successful PM2.5 pollution control and abatement.

In arid inland irrigated areas, the role of human activities on fluoride enrichment in groundwater is not fully understood. There is an extremely arid climate, high-intensity irrigation, and severe soil salinization in the Hotan Oasis within the Tarim Basin, Northwestern China. In this study, hydrogeochemistry and environmental isotope methods were combined to explore the distribution characteristics and controlling processes of fluoride enrichment in groundwater. The F⁻ concentration in groundwater had a range of 1.12–9.4 mg/L. F⁻ concentrations of all the groundwater samples were higher than 1.0 mg/L (Chinese Standards for Drinking Water Quality), and about 89% were higher than 1.5 mg/L (WHO Guidelines for Drinking Water Quality). High fluoride groundwater was mainly distributed downstream of the river and in the middle of the interfluvial zone. Vertically, the fluoride concentration was higher when the sampling depth was less than 15 m. There was a significant positive correlation between F⁻ concentration and salinity in groundwater. F⁻ in groundwater was mainly derived from river water fluoride, which could be imported to groundwater with infiltration of rivers and irrigation canals as well as irrigation return flow. Anthropogenic inputs may be partly responsible for fluoride enrichment in groundwater. Fluoride accumulated in the vadose zone by strong evapotranspiration and then leached into groundwater with irrigation return flow was the main mechanism of F⁻ enrichment in groundwater in the study area. This work is a clear example of how human activities together with natural processes can affect the chemical quality of groundwater, which is essential to safeguard the sustainable management of water and soil resources inland arid oasis areas.

Rapid economic expansion poses serious problems for groundwater resources in arid areas, which typically have high rates of groundwater depletion. In this study, integration of hydrochemical investigations involving chemical and statistical analyses are conducted to assess the factors controlling hydrochemistry and potential pollution in an arid region. Fifty-four groundwater samples were collected from the Dhurma aquifer in Saudi Arabia, and twenty-one physicochemical variables were examined for each sample. Spatial patterns of salinity and nitrate were mapped using fitted variograms. The nitrate spatial distribution shows that nitrate pollution is a persistent problem affecting a wide area of the aquifer. The hydrochemical investigations and cluster analysis reveal four significant clusters of groundwater zones. Five main factors were extracted, which explain >77% of the total data variance. These factors indicated that the chemical characteristics of the groundwater were influenced by rock–water interactions and anthropogenic factors. The identified clusters and factors were validated with hydrochemical investigations. The geogenic factors include the dissolution of various minerals (calcite, aragonite, gypsum, anhydrite, halite and fluorite) and ion exchange processes. The anthropogenic factors include the impact of irrigation return flows and the application of potassium, nitrate, and phosphate fertilizers. Over time, these anthropogenic factors will most likely contribute to further declines in groundwater quality.

This paper details the distribution of Cu, Pb and Zn in aquatic systems draining Mount Isa Ag-Cu-Pb-Zn Mine in arid northern Queensland, Australia. Sediment-metal concentrations in the <2 mm grain-size fraction adjacent to and downstream of the mine significantly exceed background concentrations (Cu, 159; Pb, 36; Zn, 86 ppm) as well as Australian government sediment quality low trigger guidelines (Cu, 65; Pb, 50; Zn, 200 ppm). Overbank sediments are more contaminated than channel sediments with mean values of Cu, 480; Pb, 540; Zn, 750 ppm. Mean concentrations in cut riverbank samples from the <2 mm fraction were Cu, 195; Pb, 724; Zn, 807 ppm. Corresponding <180 μm samples returned concentrations of Cu, 321; Pb, 995; Zn, 1110 ppm. Delivery of contaminants during wet seasons from Mount Isa Mine and historically contaminated riverbanks remains an ongoing issue. The ease of dust entrainment in arid zones means that sediments enriched in toxic concentrations of metals may be widely dispersed and ultimately ingested and absorbed by biota.

Although microplastic pollution in the soil environment is currently an important research topic, few studies have focused on farmland soil in arid regions. This study investigated the abundances, sizes, polymer compositions, and forms of microplastics across nine agricultural plots cultivated with maize, sunflower, and potato (three of each crop) plants to determine the influences of different cropping characteristics and agricultural practices. The study area was within the arid region of the Ulungur River basin in Qinghe County, Altay, Xinjiang, China. The main forms of microplastics were fragments and fibers, and polyethylene was the dominant polymer (91.6%). The microplastic abundance ranged from 11 347 items/kgdw to 78 061 items/kgdw (mean of 52 081.7 items/kgdw). The abundance and proportion of microplastics with a diameter of <0.2 mm were significantly higher in the sunflower and maize plots (i.e., tall crops) than in the potato plots (i.e., short crops) (p < 0.05). This is due to straw residues affecting the migration and recovery of the mulch. The abundance and fragmentation of microplastics were significantly higher in the sunflower and maize plots where plastic mulch was extensively used because these tall crops anchored the mulch near their stem–root systems. The mulch was then slowly aged (e.g., via wind erosion) before being fragmented due to agricultural practices (e.g., mechanical plowing and residue retention). Although microplastics sourced from mulch are probably immobilized by straw residues in the short term, fragile and easily broken pieces of mulch are eventually released into the soil due to agricultural practices. The findings suggest that different cropping characteristics can affect the abundance and fragmentation of microplastics in agricultural soils, even within the same region, and thus the level and type of microplastic pollution. Traditional plastic mulch should be replaced with biodegradable mulch to reduce microplastic pollution in agricultural fields.

The aim of this study was to assess the soil contamination caused by potentially toxic elements (Al, As, Co, Cr, Cu, Fe, Mn, Mo, Ni, Se, V, and Zn) using various indices and the associated risk of human health for adults and children in selected soils from Germany (Calcic Luvisols, Tidalic Fluvisols, Haplic Gleysols, and Eutric Fluvisols) and Egypt (Haplic Calcisols, Sodic Fluvisols, and Eutric Fluvisols). Soil contamination degree has been assessed using indices such as contamination factor (CF), pollution load index (PLI), geo-accumulation index (Igₑₒ), and enrichment factor. We also assessed the health risk for children and for male and female adults. Chromium, Cu, As, Mo, Ni, Se, and Zn in the German Fluvisols had high CF of >6, while in the Egyptian Fluvisols Se, Mo, As, and Al revealed a high CF. The PLI (1.1–5.2) was higher than unity in most soils (except for Tidalic Fluvisols), while the most important contributor was Se, followed by Mo and As in the Egyptian Fluvisols, and by Cr, Cu, and Zn in the German Fluvisols. The median value of hazard index (HI) for children in the studied soils indicated an elevated health risk (higher than one), especially in the German Fluvisols (HI = 4.0–29.0) and in the Egyptian Fluvisols (HI = 2.2–5.2). For adults, median HIs in all soils were lower than unity for both males and females. The key contributor to HI was As in the whole soil profiles, accounting for about 59% of the total HIs in all three person groupings. Our findings show that in the studied multi-element contaminated soils the risk for children’s health is higher than for adults; while mainly As (and Al, Cr, Cu, and Fe) contributed significantly to soil-derived health risk.

The response of mangrove (Avicennia marina) seedlings to treated (wet) sludge from a sewage treatment plant (STP) was tested in a randomized block design experiment at a tree nursery on Mubarraz Island in the Arabian Gulf. The growth response of seedlings to half-strength and full-strength STP sludge was monitored over 103 days and compared with the response to freshwater, seawater and half-strength seawater treatments. Sludge treatments resulted in significantly greater plant growth, leaf number, leaf biomass and root biomass than the other treatments did. The positive effect of STP sludge on seedling growth is attributed to enhanced levels of total nitrogen (8.9 ± 0.1 mg l⁻¹) and total phosphorus (7.8 ± 0.2 mg l⁻¹) in the sludge and its low salinity. These results suggest that sludge from sewage treatment plants may be beneficially used in mangrove nurseries and plantations in this arid region, where soils are nutrient-poor and fresh water is scarce.

Number of heterotrophic bacteria ability to decompose organic phosphorus compounds and the level of phosphatase activity in the sand of two marine beaches (southern coast of the Baltic Sea) differing in the level of anthropopressure were studied. The study showed that the number of bacteria and level phosphatase activity were higher in the sand of the beach subjected to stronger anthropopressure. In both studied beaches bacteria hydrolysing DNA were the most numerous (92.7–302.8CFU·g−1 d.w.). The least numerous were phytin (26.0·103CFU·g−1 d.w.) and phenolphthalein diphosphate (11.1·103CFU·g−1 d.w.) decomposing bacteria. Number of bacteria able to attack tested organic phosphorus compounds were the most numerous in dry zones (10.77–739.92CFU·g−1 d.w.) then wet zones (3.34–218.15CFU·g−1 d.w.). In both studied beaches bacteria hydrolysing organic phosphorus compounds and phosphatase activity generally were more numerous in surface sand layer. Seasonal variation in the occurrence of bacteria in both studied beaches was observed.

Evaluating the long-term variability of the seawater salinity and temperature due to climate change is a limiting economical and operational factor in planning the design of new and expansion of existing desalination plants. This need is amplified in the Arabian Gulf due to the natural arid climate and anthropological stresses related to energy exploration and ongoing major developments. The lack of data in this region further adds additional dimension to the problem. The present work represents a systematic innovative approach to evaluate the anticipated long-term changes in the seawater salinity and temperature under the stresses of projected climate change and massive industrial effluents using statistical correlation and hydrodynamic simulation. The proposed approach employs the direct relation between the net freshwater losses (evaporation) entrenched with the investigated stressors and the mean sea salinity and sea temperature variation of an inverse estuary to formulate the statistical correlation and the hydrodynamic simulation conditions.