Refine search
Results 41-50 of 2,398
The effect of sewage sludge containing microplastics on growth and fruit development of tomato plants
2021
Hernández-Arenas, Ricardo | Beltrán-Sanahuja, Ana | Navarro-Quirant, Paula | Sanz-Lazaro, Carlos
Microplastics (MPs) are becoming an environmental growing concern, being the sewage sludge applied to agriculture fields one of the most important inputs to the environment. To date, there is no standardized protocol for their extraction and changes in vegetative growth and fruit maturation on cultivated plants induced by sludge containing MPs have not been studied yet. Sewage sludge from three different wastewater treatment plants located in Murcia, Spain, were studied. First, the microplastic concentration was estimated and, then, the effects of the sewage sludge in the development of tomato plants and fruit production was analyzed. The measured parameters in tomato plants were both, biomass and length, for shoot and root part, as well as, stem diameter and tomato production. The present work has developed and validated a protocol for the extraction and quantification of MPs comprising several shapes, materials and sizes from samples of sewage sludges, which offers a good compromise for the extraction of different types of microplastic. The protocol used for MPs extraction had a recovery efficiency of 80 ± 3% (mean ± SE) and used bicarbonate, to maximize MPs extraction. The mean abundance of MPs in the studied sewage sludge samples was 30,940 ± 8589 particles kg⁻¹ dry weight. Soils with sludge containing MPs fostered the growth of tomato plants, while delaying and diminished fruit production. However, other factors or their interactions with MPs could have influenced the outcomes. Further studies are necessary to corroborate these findings and explain the mechanisms of possible effects of MPs on plants.
Show more [+] Less [-]Powdered activated carbon (PAC) amendment enhances naphthalene biodegradation under strictly sulfate-reducing conditions
2021
Pagnozzi, Giovanna | Carroll, Sean | Reible, Danny D. | Millerick, Kayleigh
Capping represents an efficient and well-established practice to contain polycyclic aromatic hydrocarbons (PAHs) in sediments, reduce mobility, and minimize risks. Exposure to PAHs can encourage biodegradation, which can improve the performance of capping. This study investigates biodegradation of naphthalene (a model PAH) in highly reducing, sediment-like environments with amendment of different capping materials (PAC and sand). Microcosms were prepared with sediment enrichments, sulfate as an electron acceptor, and naphthalene. Results show that PAC stimulates naphthalene biodegradation and mineralization, as indicated by production of ¹⁴CO₂ from radiolabeled naphthalene. Mineralization in PAC systems correlates with the enrichment of genera (Geobacter and Desulfovirga) previously identified to biodegrade naphthalene (Spearman’s, p < 0.05). Naphthalene decay in sand and media-free systems was not linked to biodegradation activity (ANOVA, p > 0.05), and microbial communities were correlated to biomass yields rather than metabolites. Naphthalene decay in PAC systems consists of three stages with respect to time: latent (0–88 days), exponential decay (88–210 days), and inactive (210–480 days). This study shows that PAC amendment enhances naphthalene biodegradation under strictly sulfate-reducing conditions and provides a kinetic and metagenomic characterization of systems demonstrating naphthalene decay.
Show more [+] Less [-]Vertical profile of aerosols in the Himalayas revealed by lidar: New insights into their seasonal/diurnal patterns, sources, and transport
2021
Xiang, Yan | Zhang, Tianshu | Liu, Jianguo | Wan, Xin | Loewen, Mark | Chen, Xintong | Kang, Shichang | Fu, Yibin | Lv, Lihui | Liu, Wenqing | Cong, Zhiyuan
Atmospheric aerosols play a crucial role in climate change, especially in the Himalayas and Tibetan Plateau. Here, we present the seasonal and diurnal characteristics of aerosol vertical profiles measured using a Mie lidar, along with surface black carbon (BC) measurements, at Mt. Qomolangma (QOMS), in the central Himalayas, in 2018–2019. Lidar-retrieved profiles of aerosols showed a distinct seasonal pattern of aerosol loading (aerosol extinction coefficient, AEC), with a maximum in the pre-monsoon (19.8 ± 22.7 Mm⁻¹ of AEC) and minimum in the summer monsoon (7.0 ± 11.2 Mm⁻¹ of AEC) seasons. The diurnal variation characteristics of AEC and BC were quite different in the non-monsoon seasons with enriched aerosols being maintained from 00:00 to 10:00 in the pre-monsoon season. The major aerosol types at QOMS were identified as background, pollution, and dust aerosols, especially during the pre-monsoon season. The occurrence of pollution events influenced the vertical distribution, seasonal/diurnal patterns, and types of aerosols. Source contribution of BC based on the weather research and forecasting chemical model showed that approximately 64.2% ± 17.0% of BC at the QOMS originated from India and Nepal in South Asia during the non-monsoon seasons, whereas approximately 47.7% was from local emission sources in monsoon season. In particular, the high abundance of BC at the QOMS in the pre-monsoon season was attributed to biomass burning, whereas anthropogenic emissions were the likely sources during the other seasons. The maximum aerosol concentration appeared in the near-surface layer (approximately 4.3 km ASL), and high concentrations of transported aerosols were mainly found at 4.98, 4.58, 4.74, and 4.88 km ASL in the pre-monsoon, monsoon, post-monsoon, and winter seasons, respectively. The investigation of the vertical profiles of aerosols at the QOMS can help verify the representation of aerosols in the air quality model and satellite products and regulate the anthropogenic disturbance over the Tibetan Plateau.
Show more [+] Less [-]Biomass-burning emissions could significantly enhance the atmospheric oxidizing capacity in continental air pollution
2021
Zhu, Bo | Huang, Xiao Feng | Xia, Shi-Yong | Lin, Li-Liang | Cheng, Yong | He, Ling-Yan
Volatile organic compounds (VOCs) are important precursors of photochemical pollution. However, a substantial fraction of VOCs, namely, oxygenated VOCs (OVOCs), have not been sufficiently characterized to evaluate their sources in air pollution in China. In this study, a total of 119 VOCs, including 60 OVOCs in particular, were monitored to provide a more comprehensive picture based on different online measurement techniques, proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) and online gas chromatography/mass spectrometry (GC/MS), at a receptor site in southeastern China during a photochemically active period. Positive matrix factorization (PMF) and photochemical age-based parameterization were combined to identify and quantify different sources of major VOCs during daytime hours, with the advantage of including VOC decay processes. The results revealed the unexpected role of biomass burning (21%) in terms of ozone (O₃) formation potential (OFP) when including the contributions of OVOCs and large contributions (30–32%) of biomass burning to aldehydes, as more OVOCs were measured in this study. We argue that biomass burning could significantly enhance the continental atmospheric oxidizing capacity, in addition to the well-recognized contributions of primary pollutants, which should be seriously considered in photochemical models and air pollution control strategies.
Show more [+] Less [-]Effects of nitrogen-enriched biochar on rice growth and yield, iron dynamics, and soil carbon storage and emissions: A tool to improve sustainable rice cultivation
2021
Yin, Xiaolei | Peñuelas, Josep | Sardans, Jordi | Xu, Xuping | Chen, Youyang | Fang, Yunying | Wu, Liangquan | Singh, Bhupinder Pal | Tavakkoli, Ehsan | Wang, Weiqi
Biochar is often applied to paddy soils as a soil improver, as it retains nutrients and increases C sequestration; as such, it is a tool in the move towards C-neutral agriculture. Nitrogen (N) fertilizers have been excessively applied to rice paddies, particularly in small farms in China, because N is the major limiting factor for rice production. In paddy soils, dynamic changes in iron (Fe) continuously affect soil emissions of methane (CH₄) and carbon dioxide (CO₂); however, the links between Fe dynamics and greenhouse gas emissions, dissolved organic carbon (DOC), and rice yields following application of biochar remain unclear. The aims of this study were to examine the effects of two rates of nitrogen (N)-enriched biochar (4 and 8 t ha⁻¹ y⁻¹) on paddy soil C emissions and storage, rice yields, and Fe dynamics in subtropical early and late rice growing seasons. Field application of N-enriched biochar at 4 and 8 t ha⁻¹ increased C emissions in early and late rice, whereas application at 4 t ha⁻¹ significantly increased rice yields. The results of a culture experiment and a field experiment showed that the application of N-enriched biochar increased soil Fe²⁺concentration. There were positive correlations between Fe²⁺concentrations and soil CO₂, CH₄, and total C emissions, and with soil DOC concentrations. On the other way around, these correlations were negative for soil Fe³⁺concentrations. In the soil culture experiment, under the exclusion of plant growth, N-enriched biochar reduced cumulative soil emissions of CH₄ and CO₂. We conclude that moderate inputs of N-rich biochar (4 t ha⁻¹) increase rice crop yield and biomass, and soil DOC concentrations, while moderating soil cumulative C emissions, in part, by the impacts of biochar on soil Fe dynamics. We suggest that water management strategies, such as dry-wet cycles, should be employed in rice cultivation to increase Fe²⁺ oxidation for the inhibition of soil CH₄ and CO₂ production. Overall, we showed that application of 4 t ha⁻¹ of N-enriched biochar may represent a potential tool to improve sustainable food production and security, while minimizing negative environmental impacts.
Show more [+] Less [-]Field-based measurements of major air pollutant emissions from typical porcelain kiln in China
2021
Du, Wei | Wang, Jinze | Chen, Yuanchen | Zhuo, Shaojie | Wu, Shuiping | Liu, Weijian | Lin, Nan | Shen, Guofeng | Tao, Shu
China has been famous for its porcelains for millennia, and the combustion processes of porcelain production emit substantial amounts of air pollutants, which have not been well understood. This study provided firsthand data of air pollutant emissions from biomass porcelain kilns. The emission factor of PM₂.₅ was 0.95 ± 1.23 g/kg during the entire combustion cycle, lower than that of biomass burning in residential stoves and coal burning in brick kilns, attributed to the removal effects of the long-distance transport in dragon kilns. The temporal trend of particle pollutants, including particulate matters (PMs) and particulate polycyclic aromatic hydrocarbons (PAHs) (low at ignition phase and high at the end) again indicated the removal effects of the special structure, while gaseous pollutants, such as gaseous PAHs, exhibited the opposite result. The GWC₁₀₀ was estimated as 1.4 × 10⁶ and 0.5 × 10⁶ kg CO₂e/yr for the scenarios in which 50% and 100% of the wood was renewable, respectively. The GWC₁₀₀ of dragon kilns is nearly equal to that of 745 households using wood-fueled stoves. These results indicate the necessity of pollution controls for biomass porcelain kilns to estimate the emission inventory and climate change.
Show more [+] Less [-]Cascading effects of insecticides and road salt on wetland communities
2021
Lewis, Jacquelyn L. | Agostini, Gabriela | Jones, Devin K. | Relyea, Rick A.
Novel stressors introduced by human activities increasingly threaten freshwater ecosystems. The annual application of more than 2.3 billion kg of pesticide active ingredient and 22 billion kg of road salt has led to the contamination of temperate waterways. While pesticides and road salt are known to cause direct and indirect effects in aquatic communities, their possible interactive effects remain widely unknown. Using outdoor mesocosms, we created wetland communities consisting of zooplankton, phytoplankton, periphyton, and leopard frog (Rana pipiens) tadpoles. We evaluated the toxic effects of six broad-spectrum insecticides from three families (neonicotinoids: thiamethoxam, imidacloprid; organophosphates: chlorpyrifos, malathion; pyrethroids: cypermethrin, permethrin), as well as the potentially interactive effects of four of these insecticides with three concentrations of road salt (NaCl; 44, 160, 1600 Cl⁻ mg/L). Organophosphate exposure decreased zooplankton abundance, elevated phytoplankton biomass, and reduced tadpole mass whereas exposure to neonicotinoids and pyrethroids decreased zooplankton abundance but had no significant effect on phytoplankton abundance or tadpole mass. While organophosphates decreased zooplankton abundance at all salt concentrations, effects on phytoplankton abundance and tadpole mass were dependent upon salt concentration. In contrast, while pyrethroids had no effects in the absence of salt, they decreased zooplankton and phytoplankton density under increased salt concentrations. Our results highlight the importance of multiple-stressor research under natural conditions. As human activities continue to imperil freshwater systems, it is vital to move beyond single-stressor experiments that exclude potentially interactive effects of chemical contaminants.
Show more [+] Less [-]Study of a hydrodynamic threshold system for controlling dinoflagellate blooms in reservoirs
2021
Song, Yang | Shen, Lian | Zhang, Linglei | Li, Jia | Chen, Min
Hydrodynamic conditions often affect the eutrophication process and play a key role in algal growth in reservoirs. A promising approach for controlling algal blooms in reservoirs is to create adverse hydrodynamic conditions by implementing reservoir operation strategies. However, research on this method is still nascent and does not support practical applications due to the lack of quantitative hydrodynamic thresholds. In this paper, field observations of algal growth from April 2015 to August 2016 were conducted, and a three-dimensional (3D) model that couples hydrodynamics and water temperatures for the Zipingpu Reservoir was established. Low flow velocities (V) and low Reynolds numbers (Re) in the Longchi tributary are favorable for dinoflagellate growth and accumulation, which can explain why dinoflagellate blooms are more likely to occur in the tributary. A temperature of 18–22 °C is considered a precondition for Peridiniopsis penardii blooms, suggesting that freshwater dinoflagellate species may prefer lower temperatures than marine dinoflagellate species. Shallow mixing layer depth (Zₘᵢₓ) is conducive to Peridiniopsis penardii gathering in the upper water layers and promotes growth. The shallow euphotic layer depth (Zₑᵤ) was speculated to promote the dominance of this species by stimulating its heterotrophy and inhibiting other algal autotrophy. Furthermore, a boundary line analysis was introduced to characterize the relationships between algal biomass and hydrodynamic indicators. Thus, the thresholds for V, Re, and Zₘᵢₓ/Zₑᵤ were determined to be 0.034 m s⁻¹, 6.7 × 10⁴, and 1.7, respectively. Either accelerating horizontal flow to exceed the thresholds of V and Re or facilitating vertical mixing to exceed the threshold of Zₘᵢₓ/Zₑᵤ can prevent dinoflagellate blooms. Therefore, the summarized hydrodynamic threshold system is suggested to be an effective standard for controlling dinoflagellate blooms in the reservoir. Moreover, this study can provide a useful reference for understanding the mechanism of freshwater dinoflagellate blooms.
Show more [+] Less [-]The application of hierarchical clustering to analyzing ashes from the combustion of wood pellets mixed with waste materials
2021
Grabowski, Jacek | Smoliński, Adam
Air pollution constitutes the greatest environmental threat to human health in the European Union. In Poland, the emission of particulate matter and harmful gases originating from local coal based boiler plants and the combustion of fuels in residential heating appliances is a considerable source of air pollution. The combustion of fuel in home furnaces is inefficient due to the use of cheap fuels of low heating parameters and the frequent addition of waste. For the purpose of the research, deciduous tree wood pellets were selected as the basic fuel with the admixture of plastic waste, rubber, waste paper, wood residues, diapers, textile waste, multi-material packaging, construction waste, biomass and alternative fuel (RDF). Examining ash samples to confirm the practices of combusting or co-combusting waste materials in heating appliances is considered to be one of the most reliable detection methods; however, the results of direct research require further data processing. The application of hierarchical clustering analysis to the obtained results arranged into a matrix enabled in a simple way to demonstrate the similarities between the examined samples of fuel and the samples of fuel mixed with waste materials in the parameters space as well as to analyze the similarities among the measured parameters (the content of particular elements in ash) in the space of the examined samples. The application of chemometric methods for the purpose of identifying the combusted fuels, and, in particular the co-combusted waste complements the currently used monitoring tools which control the use of low quality fuels or the combustion of waste of different origin.
Show more [+] Less [-]Sequestration of microfibers and other microplastics by green algae, Cladophora, in the US Great Lakes
2021
Peller, Julie | Nevers, Meredith B. | Byappanahalli, Muruleedhara | Nelson, Cassie | Ganesh Babu, Bharath | Evans, Mary Anne | Kostelnik, Eddie | Keller, Morgan | Johnston, Jenna | Shidler, Sarah
Daunting amounts of microplastics are present in surface waters worldwide. A main category of microplastics is synthetic microfibers, which originate from textiles. These microplastics are generated and released in laundering and are discharged by wastewater treatment plants or enter surface waters from other sources. The polymers that constitute many common synthetic microfibers are mostly denser than water, and eventually settle out in aquatic environments. The interaction of these microfibers with submerged aquatic vegetation has not been thoroughly investigated but is potentially an important aquatic sink in surface waters. In the Laurentian Great Lakes, prolific growth of macrophytic Cladophora creates submerged biomass with a large amount of surface area and the potential to collect and concentrate microplastics. To determine the number of synthetic microfibers in Great Lakes Cladophora, samples were collected from Lakes Erie and Michigan at multiple depths in the spring and summer of 2018. After rinsing and processing the algae, associated synthetic microfibers were quantified. The average loads of synthetic microfibers determined from the Lake Erie and Lake Michigan samples were 32,000 per kg (dry weight (dw)) and 34,000 per kg (dw), respectively, 2–4 orders of magnitude greater than loads previously reported in water and sediment. To further explore this sequestration of microplastics, fresh and aged Cladophora were mixed with aqueous mixtures of microfibers or microplastic in the laboratory to simulate pollution events. Microscopic analyses indicated that fresh Cladophora algae readily interacted with microplastics via adsorptive forces and physical entanglement. These interactions mostly cease upon algal senescence, with an expected release of microplastics in benthic sediments. Collectively, these findings suggest that synthetic microfibers are widespread in Cladophora algae and the affinity between microplastics and Cladophora may offer insights for removing microplastic pollution.Macroalgae in the Laurentian Great Lakes contain high loads of synthetic microfibers, both entangled and adsorbed, which likely account for an important fraction of microplastics in these surface waters.
Show more [+] Less [-]