The availability of organic matters in vast quantities from the agricultural/industrial practices has long been a significant environmental challenge. These wastes have created global issues in increasing the levels of BOD or COD in water as well as in soil or air segments. Such wastes can be converted into bioenergy using a specific conversion platform in conjunction with the appropriate utilization of the methods such as anaerobic digestion, secondary waste treatment, or efficient hydrolytic breakdown as these can promote bioenergy production to mitigate the environmental issues. By the proper utilization of waste organics and by adopting innovative approaches, one can develop bioenergy processes to meet the energy needs of the society. Waste organic matters from plant origins or other agro-sources, biopolymers, or complex organic matters (cellulose, hemicelluloses, non-consumable starches or proteins) can be used as cheap raw carbon resources to produce biofuels or biogases to fulfill the ever increasing energy demands. Attempts have been made for bioenergy production by biosynthesizing, methanol, n-butanol, ethanol, algal biodiesel, and biohydrogen using different types of organic matters via biotechnological/chemical routes to meet the world’s energy need by producing least amount of toxic gases (reduction up to 20–70% in concentration) in order to promote sustainable green environmental growth. This review emphasizes on the nature of available wastes, different strategies for its breakdown or hydrolysis, efficient microbial systems. Some representative examples of biomasses source that are used for bioenergy production by providing critical information are discussed. Furthermore, bioenergy production from the plant-based organic matters and environmental issues are also discussed. Advanced biofuels from the organic matters are discussed with efficient microbial and chemical processes for the promotion of biofuel production from the utilization of plant biomasses.

This study aims to investigate factors leading to agglomeration of citrate coated silver (AgNP-Cit), polyvinylpyrrolidone coated AgNPPVP and titanium dioxide (TiO2) nanoparticles in surface waters and wastewater. ENPs (1 mg/L) were spiked to unfiltered, filtered, ultrafiltered (<10 kDa and <1 kDa) samples. Z-average particle sizes were measured after 1 h, 1 day and 1 week. AgNP-PVP was stable in all fractions of the samples and kept their original size around 60 nm over 1 week. Agglomeration of AgNP-Cit and TiO2 was positively correlated with Ca2+ concentration, but dissolved organic carbon concentrations > 2 mg/L contributed to stabilizing these NP. Moreover, agglomeration of AgNP-Cit in the various organic matter fractions showed that high molecular weight organic compounds such as biopolymers provide stabilization in natural water. A generalized scheme for the agglomeration behavior of AgNP-Cit, AgNP-PVP and TiO2 in natural waters was proposed based on their relation with Ca2+, Mg2+ and DOC concentration.

The increasing water pollution caused by the presence of nano- and microplastics has shown a need to pursue solutions to remediate this problem. In this work, an extracellular polymeric substance (EPS) producing freshwater Cyanothece sp. strain was exposed to nano- and microplastics. The bioflocculant capacity of the biopolymer produced was evaluated. The influence of different concentrations (1 and 10 mg L⁻¹) of polystyrene nano- and microplastics in the extracellular carbohydrates and in the EPS production was studied. The presence of nano- and microplastics induced a negative effect on the microalgal growth (of up to 47%). The results show that the EPS produced by Cyanothece sp. exhibits high bioflocculant activity in low concentrations. Also, the EPS displayed very favourable characteristics for aggregation, as the aggregates were confirmed to consist of microalga, EPS and both the nano- and microplastics. These results highlight the potential of the microalgal-based biopolymers to replace hazardous synthetic flocculants used in wastewater treatment, while aggregating and flocculating nano- and microplastics, demonstrating to be a multi-purposed, compelling, biocompatible solution to nano- and microplastic pollution.

In the present work, acute impact of heavy metals on activated sludge was investigated, specifically the release of biopolymers and nitrogenous soluble microbiological products (N-SMP) that significantly impact tertiary effluent quality. Based on the previously reported studies, Hg²⁺ and Ag⁺ were selected as representative “non-essential” heavy metals, while Cu²⁺ was selected as the “essential” heavy metal. Stress tests show that under the present experimental conditions, adding a higher concentration of heavy metals to the activated sludge increases the concentration of biopolymers and SMP in the supernatant; N-SMP increased more significantly than carbonaceous products, implying a greater risk of formation of toxic nitrogenous disinfection by-products or membrane fouling in relevant tertiary treatment processes. The severity of the release of SMP into the supernatant depended on the heavy metal, with an order of Hg²⁺ > Ag⁺ > Cu²⁺ (“non-essential” > “essential”) under identical molar concentrations. The mass balance of typical organics (e.g., biopolymers) in SMP and extracellular polymeric substances (EPS) in activated sludge was analyzed, and a negative correlation between the organics in the SMP and tightly bound EPS was observed, implying that a significant fraction of the SMP could be quickly released from the tightly bound EPS under heavy metal shock conditions and could be related to cell response or damage.

The development of an eco-friendly and reliable process for the production of nanomaterials is essential to overcome the toxicity and exorbitant cost of conventional methods. As such, a facile and green synthesis method is introduced for the preparation of lignin mediated silver nanoparticles (L-Ag NPs). This is produced by reducing Ag precursors using lignin biopolymers which are formulated by pulsed laser irradiation and an ultrasonication process. Lignin operates as both a reducing and stabilizing agent. The various analytical techniques of ultraviolet–visible spectroscopy, transmission electron microscope and X-ray diffractometer studies were employed to verify the formation of non-aggregated spherical L-Ag NPs with an average size as small as 7–8 nm. The selective sensing capability of the synthesized L-Ag NPs was examined for the detection of hydrogen peroxide and mercury ions in an aqueous environment. Furthermore, the superior catalytic performance of L-Ag NPs was demonstrated by the rapid conversion of toxic 4-nitrophenol and nitrobenzene as targeted pollutants to the corresponding amino compounds. A plausible catalytic reduction mechanism for the removal of toxic nitro-organic pollutants over L-Ag NPs is proposed. This research coincides with existing studies and affirms that L-Ag NPs are an effective sensor that be applied as a catalytic material within environmental remediation and also alternative biomedical applications.

In this study, we report that silver ions (Ag+) from the oxidative dissolution of silver engineered nanoparticles (Ag-ENs) determined the EN toxicity to the marine diatom Thalassiosira weissflogii. Most of the Ag-ENs formed non-toxic aggregates (>0.22 μm) in seawater. When the free Ag+ concentration ([Ag+]F) was greatly reduced by diafiltration or thiol complexation, no toxicity was observed, even though the Ag-ENs were better dispersed in the presence of thiols with up to 1.08 x 10⁻⁵ M Ag-ENs found in the <0.22 μm fraction, which are orders of magnitude higher than predicted for the natural aquatic environment. The secretion of polysaccharide-rich algal exopolymeric substances (EPS) significantly increased at increasing [Ag+]F. Both dissolved and particulate polysaccharide concentrations were higher for nutrient-limited cells, coinciding with their higher Ag+ tolerance, suggesting that EPS may be involved in Ag+ detoxification. Ag-ENs were found to only have indirect toxic effects on marine phytoplankton as a result of their rapid Ag+ release.

Antifouling paint particles (APPs) are a type of paint particle loaded with toxic biocidal compounds. The present review focused on the current knowledge in respect of the abundance, distribution, and ecotoxicological effects of APPs in the marine environment. Also, the recent advances in nontoxic biobased antifouling paints were discussed as potential alternatives to contemporary marine coatings. The presence of APPs is mainly associated with boat maintenance in boatyards and port areas. Conventional microplastic assessments showed a significant contribution of paint particles to the morphological composition. Moreover, recent ecotoxicological studies demonstrated that environmental concentrations of APPs induce mortality (LC₅₀) in sediment dwellers and macroinvertebrates. Novel biocides from natural sources and biopolymer binders in the formulation of antifouling paints are proposed as potential alternatives to conventional antifouling paints. The toxicity of most natural biocides is negligible to nontargeted species, while biopolymers are expected to prevent the formation of APPs.

PURPOSE OF REVIEW: Phenolic wastewaters represent a serious health and environmental problem. The remediation of phenolic wastewaters using oxidoreductase enzymes has emerged as an attractive environmentally friendly treatment method. However, the loss of enzyme activity during the treatment remains a key limitation. Thus, the aim of this article is to review and assess the recent progress in utilizing surface active additives (i.e., polymers, biopolymers, surfactants, and biosurfactants) for the reduction of enzyme inhibition and, thus, the enhancement of enzymatic remediation of phenolic wastewaters. RECENT FINDINGS: The reported effect of polymeric and surfactant additives on the enzymatic remediation of phenolic pollutants is mixed. Some studies reported significant enhancements while others demonstrated minimal or no gains. More seriously, it has been reported that these fossil-based additives might lead to a higher toxicity of the treated wastewaters. Bio-based (biopolymers and biosurfactants) additives might address this toxicity issue; however, the bio-based additives are not always as effective as the fossil-based ones. Despite the beneficial effect, with some exceptions, of additives, the enhancement level varies widely, probably due to the variations in the reaction environment. Thus, to draw meaningful and reliable conclusions on which additive(s) is more promising, thorough studies under unified conditions are needed. Additionally, generation of secondary pollutions associated with the fossil-based additives urges the replacement of such additives with bio-based ones. However, the effectiveness of the bio-based additives is still not sufficiently documented, stressing the need for more in-depth studies.

We examined whether bacterial assemblages inhabiting the synthetic polymer polyamide are selectively modified during their passage through the gut of Mytilus edulis in comparison to the biopolymer chitin with focus on potential pathogens. Specifically, we asked whether bacterial biofilms remained stable over a prolonged period of time and whether polyamide could thus serve as a vector for potential pathogenic bacteria. Bacterial diversity and identity were analysed by 16S rRNA gene fingerprints and sequencing of abundant bands. The experiments revealed that egested particles were rapidly colonised by bacteria from the environment, but the taxonomic composition of the biofilms on polyamide and chitin did not differ. No potential pathogens could be detected exclusively on polyamide. However, after 7days of incubation of the biofilms in seawater, the species richness of the polyamide assemblage was lower than that of the chitin assemblage, with yet unknown impacts on the functioning of the biofilm community.

The degree of pyritization (DOP) and the extension of metals incorporation into pyrite was investigated at Guanabara Bay sediments. Maximum concentrations of total organic carbon (TOC), total sulfur, biopolymers and viable bacteria cells were observed in silted stations close to discharge points of sewage and minimum concentrations at sandy stations at the entrance of the bay. Pyrite iron concentrations (Fepy) was always lower than the reactive iron and Fepy were below the detection limit at sandy stations. The same trend was found to metals, which its degree of pyritization was Mn=Cu>As=Co>Ni>Cd>Zn≫Pb>Cr. The bay gathers all required factors to sulfate reduction and pyrite formation, once the C:S ratio express the reduced tendency conditions, almost half of the TOC present in its sediments is labile and both reactive sulfur and iron are available. However the degree of trace metals pyritization did not exceed 20%, consistent with the median DOP (29%).