Refine search
Results 1-10 of 19
Enhancement of the diesel oil degradation ability of a marine bacterial strain by immobilization on a novel compound carrier material
2013
Hou, Dengyong | Shen, Xianrong | Luo, Qun | He, Ying | Wang, Qingrong | Liu, Qiong
A novel floatable and biodegradable carrier material was made by coating puffed foxtail millet (PFM) with a calcium alginate (CA)-chitosan compound membrane. A diesel oil-degrading marine bacterial strain, Acinetobacter sp. F9, was immobilized on the carrier material. The number of viable F9 cells immobilized on the carrier material reached approximately 5×109CFU/g. This formulation could be stored at −20°C and 4°C for 10weeks without a significant decrease in the number of viable immobilized cells. SEM results showed that the coating membrane was porous and that F9 cells were immobilized on the walls of the pores. The immobilized F9 cells were able to remove more than 90% of the diesel oil by the second day, while free F9 cells did not remove 90% of the diesel oil until the seventh day. GC–MS analysis indicated that the immobilized F9 cells could remove diesel oil more completely than free cells. The immobilization of the F9 cells enhanced their ability to biodegrade diesel oil.
Show more [+] Less [-]Novel bio-fertilizer based on nitrogen-fixing bacterium immobilized in a hydrotalcite/alginate composite material
2022
Velázquez-Herrera, Franchescoli Didier | Lobo-Sánchez, Marta | Carranza-Cuautle, Giovanna M. | Sampieri, Álvaro | del Rocío Bustillos-Cristales, María | Fetter, Geolar
The bacterium Streptomyces sp. is a common genus of the actinomycetes class found in soils and rhizospheres. This bacterium can produce substances with bio-stimulant capacity through the fixation of nitrogen from the air. In this work, the Streptomyces sp. bacterium was immobilized on a ZnMgAl-hydrotalcite clay and embedded in calcium alginate beads to generate a novel bio-composite that functions as a bacterial reservoir and as a controlled release material for bacteria to be used as a bio-fertilizer.The results showed that the novel bacterium-hydrotalcite/alginate bio-composite was very efficient as a bio-fertilizer showing a plant length of 64 mm in only 14 days of growing, which corresponds to an increase of ca. 760% in the lettuce plant growth in comparison with the materials without bacteria. In short, the present results demonstrate that the hydrotalcite and alginate served as an excellent container to keep the bacteria alive, providing nutrients to them and controlling their delivery.
Show more [+] Less [-]Selective Adsorption Capacity of Grape Marc Hydrogel for Adsorption of Binary Mixtures of Dyes
2020
In this work, an aqueous solution containing industrial dyes consisting of methylene blue (MB), and methyl red (MR) was treated with bio-oxidize grape marc entrapped or not in calcium alginate hydrogels. Experiments were carried out in batch, a room temperature using different concentration of adsorbents and dyes. When dyes were evaluated separately, non-immobilized grape marc hydrogel was unable to remove any MR, whereas when the bioadsorbent was immobilized in calcium alginate beads the removal of MR was around 88%. Contrarily, 98% of MB was removed with both, non-entrapped or entrapped grape marc. Regarding binary mixtures, it was observed that the adsorption of MR was not affected by the presence of MB, whereas the adsorption of MB decreased in high extend on non-entrapped grape marc when MR was present.Adsorption conditions were optimized for binary mixtures using a Box-Behnken factorial design, obtaining theoretical equations that allowed to calculate the removal percentage and capacity of calcium alginate-grape marc hydrogel depending on the concentration of dyes (40–100 mg/L), ratio between bioadsorbent and water stream (0.6–1.2) and adsorption time (10–60 min). The equations obtained revealed that grape marc hydrogel is able to remove 100.0–93.3% of MB and 78.72–57.80% of MR in 10 min in the range of dye and bioadsorbent stablished in the experimental design, being the extraction time the less significant variable. Additionally, the kinetic study showed that pseudo-second-order was the model that better explained the bioadsorption process for both dyes in binary mixtures onto grape marc hydrogel.
Show more [+] Less [-]Reduction of Nitrate in Groundwater by Fe(0)/Magnetite Nanoparticles Entrapped in Ca-Alginate Beads
2015
(Franklin W.),
Calcium alginate beads entrapping a mixture of Fe(0) and nanosized magnetite (NMT) were prepared and evaluated for their capability to reduce nitrate in groundwater. Microscopic and spectroscopic analyses of the beads revealed that clusters of Fe(0)/NMT were entirely embedded in alginate polymer matrix containing a large number of carboxylic and hydroxyl functional groups. The extent of nitrate reduction increased with increasing content of Fe(0) and NMT in the beads, but there was a critical NMT mass limit relative to Fe(0) mass where no further increase in nitrate reduction occurred. The beads showed slower nitrate reduction kinetics than bare Fe(0)/NMT but had comparable capacity in overall nitrate removal. Nitrate reduction increased proportionally with an increase in bead dosage to give a maximum removal of 94.5 % at 37.5 g L⁻¹ in 48 h. Nitrate reduction with 50 g L⁻¹ beads achieved completion of two reduction cycles in 72 h to reduce 2.19 mM nitrate to less than 0.71 mM (10 mg-N L⁻¹) in each cycle. The overall results demonstrated that the beads developed in this study have a potential utility in remediation of nitrate in groundwater.
Show more [+] Less [-]A Reusable Biosorbent Using Ca-Alginate Immobilized Providencia vermicola for Pd(II) Recovery from Acidic Solution
2020
Xie, Jianping | Feng, Ningning | Wong, Yoon-wah | Guo, Ziwen | Dong, Haigang | Cui, Hao | Wu, Haiyan | Qiu, Guanzhou | Liu, Xinxing
This study aimed to develop Ca-alginate immobilized Providencia vermicola as a reusable biosorbent to recover palladium ions from acidic solutions. To examine the adsorption characteristics and availability of Ca-alginate immobilized P. vermicola for Pd(II) recovery, several experiments such as SEM-EDX, FT-IR, isotherm, kinetics, fixed-bed columns, desorption, and reusability were conducted. The results of SEM-EDX and FT-IR analyses demonstrated that amino and carboxyl groups were the main contributors in the Pd(II) biosorption process and that hydroxyl and phosphate groups were also critical for Pd(II) adsorption. The adsorption isotherms could be well described by the Langmuir model, and the maximum adsorption capacity was 197.23 mg g⁻¹. Kinetic experiments suggested that the biosorbent reached adsorption equilibrium within 60 min. After adsorption, the Pd(II) bound to the Ca-alginate immobilized P. vermicola was easily desorbed with 0.1 M HCl. A regeneration test of this Ca-alginate immobilized P. vermicola biosorbent revealed that it could be used for at least five cycles with high adsorption capacity. These results indicated that Ca-alginate immobilized P. vermicola has the extraordinary potential to adsorb metal ions from industrial wastewater.
Show more [+] Less [-]Industrial Symbiosis Between the Winery and Environmental Industry Through the Utilization of Grape Marc for Water Desalination Containing Copper(II)
2018
Bustos, G. | Calvar, S. | Vecino, X. | Cruz, J.M. | Moldes, A.B.
A bioadsorbent formulated with a secondary raw material, consisting of grape marc, subjected to a bioxidize process and entrapped in calcium alginate beads, was used for the desalination of water containing copper(II) sulfate. Experiments were established under different experimental conditions varying the concentration of contaminant, the amount of bioadsorbent, and the extraction time through response surface methodology. The most significant variable in the removal of copper(II) sulfate was the amount of bioadsorbent employed, followed by the extraction time; whereas, the adsorbent capacity was more influenced by the amount of contaminant and the amount of bioadsorbent used. At the highest concentration of copper(II) sulfate (0.15 mol/L), the equations obtained predict that the bioadsorbent has a capacity of 2785 mg/g and produces a copper(II) removal about 43% using low adsorbent/water ratios, 1:10 (v/v), and maximum extraction times; whereas, it would remove 97.2% of copper(II) sulfate in 5 min, using adsorbent/water ratios close to 1:2 (v/v), with capacity values, in this case, around 1800 mg/g. The encapsulation of the bioxidize adsorbent increased its capacity to 30% and allowed the precipitation of sulfate ions as calcium sulfate. The results obtained in this work could presume advances for promoting the industrial symbiosis between winery and environmental industries. Graphical abstract Utilization of secondary raw material, consisting of bioxidize grape marc from winery industry, as bioadsorbent encapsulated in calcium alginate beads, for the removal of copper(II) sulfate from water
Show more [+] Less [-]Entrapped Peat in Alginate Beads as Green Adsorbent for the Elimination of Dye Compounds from Vinasses
2013
Vecino, X. | Devesa-Rey, R. | Cruz, J. M. | Moldes, A. B.
It is known that peat can be a potential adsorbent to remove contaminants from wastewaters. When raw peat is used, many limitations exist: Natural peat has a low mechanical strength, high affinity for water, poor chemical stability and tendency to shrink and/or swell. In this work, in order to obtain a more manageable substrate, to be used as adsorbent, peat was entrapped in calcium alginate beads. Box–Behnken factorial design was used to obtain the best condition for the immobilization of peat in calcium alginate beads. The independent variables studied were: peat concentration, sodium alginate concentration and calcium chloride concentration, whereas the dependent variables studied were based on the variation of colour parameters after the treatment of vinasses with entrapped peat. High colour reductions can be achieved using entrapped peat formulated by mixing 2 % of peat with 3 % of sodium alginate and pumped it on calcium chloride (0.05 M).
Show more [+] Less [-]Arsenic Removal from Groundwater by Goethite Impregnated Calcium Alginate Beads
2015
Basu, H. | Singhal, R. K. | Pimple, M. V. | Reddy, A. V. R.
In the present work, goethite (α-FeO(OH)) impregnated calcium alginate (Cal-Alg-Goe) beads were used to sorb the arsenic from groundwater without disturbing its physicochemical characteristics. Beads were formed by dropwise addition of homogenized mixer of goethite and 4 % sodium alginate solution in 0.2 M CaCl₂solution. Charge, size, and morphology of sorbents were characterized by using various techniques. The results of batch sorption experiments suggest that Cal-Alg-Goe beads are very effective for removal of arsenic in the pH range 3.0 to 7.5, and sorption was more than 95 % in the concentration range of 10–10,000 ng mL⁻¹. Beads were successfully tested for groundwater samples collected from areas having elevated levels of arsenic. Equilibrium sorption follows Langmuir isotherm model, and the maximum arsenic uptake calculated was 30.44 mg g⁻¹. The sorption kinetics could be explained by pseudo-first-order model, and the time needed for equilibrium was 24 h.
Show more [+] Less [-]Heterogenous Lignocellulosic Composites as Bio-Based Adsorbents for Wastewater Dye Removal: a Kinetic Comparison
2015
Perez-Ameneiro, M. | Bustos, G. | Vecino, X. | Barbosa-Pereira, L. | Cruz, J. M. | Moldes, A. B.
Different lignocellulosic substrates consisting of modified barley husk, peanut shells and sawdust were entrapped in calcium alginate beads and used as adsorbents to remove dye compounds from vinasses. For comparative purposes, a biocomposite formulated with humus was also included in this work. Kinetic studies were carried out by applying pseudo-first-order, pseudo-second-order, Chien–Clayton and intraparticle diffusion models, observing a good agreement between theoretical and experimental results when the data were adjusted to pseudo-second-order kinetic model. The results of this study show that lignocellulosic-based biocomposites could be used as an effective and low-cost adsorbent for the removal of dyes from aqueous solutions. Among the heterogeneous biopolymers evaluated, the biocomposite based on barley husk gave the best capacity for dye removal. Moreover, in all cases, it was found that there exists a direct relationship between the capacity of the biocomposites to remove dyes and the percentage of carbon contained in the lignocellulosic residues.
Show more [+] Less [-]Removal of Ammonium and 4-Methylphenol from Synthetic Wastewater by Cell-Free Extracts of Nitrifying Sludge
2015
Covarrubias-Vallejo, J. | González-Blanco, G. | Prado-Barragán, A. | Beristain-Cardoso, R.
The feasibility of using cell-free extracts of nitrifying sludge to treat synthetic wastewater containing 4-methylphenol and ammonium was examined. Nitrifying cells were broken by sonication and encapsulated into calcium alginate. Cell-free extracts (CFE) of nitrifying sludge oxidized 4-methylphenol threefold faster than whole-cells, but CFE were not able to oxidize ammonium. The CFE encapsulated into calcium alginate (CFEA) displayed partial nitrification and 4-methylphenol oxidation. Five hours was enough to oxidize 100 % of ammonium and 4-methylphenol, at volumetric rates of 20.80 mg N/L h and 42.86 mg C/L h, respectively. It is inferred that an interaction between the CFE and calcium alginate resulted in the protection of the enzymes.
Show more [+] Less [-]