Refine search
Results 1-10 of 2,059
Trace elements in vegetables grown in an industrial area in relation to soil and air particulate matter.
1996
Voutsa D. | Grimanis A. | Samara C.
Fluxes of Cu, Zn, Pb, Cd, Cr, and Ni in temperate forest ecosystems. A literature review.
1989
Bergkvist B. | Folkeson L. | Berggren D.
A reconstruction of emission, flow and accumulation of chromium in Sweden 1920-1980.
1989
Bergbaeck B. | Anderberg S. | Lohm U.
Effects of tannic acid on the transport behavior of trivalent chromium in soils and its mechanism
2022
Xu, Teng | Jiang, Xiaofeng | Tang, Yuling | Zeng, Yunhang | Zhang, Wenhua | Shi, Bi
Trivalent chromium [Cr(III)] and tannins serve as necessary substances in leather processing and coexist in tannery site, which lead to the chromium contamination in site soil when disposed improperly. However, coexisting tannins are very likely to complex with Cr(III) and affect its properties, ultimately changing the mobility of chromium in soil. In this study, tannic acid (TA) was selected to investigate the complexation with Cr(III) and the influence on the solubility and sorption of Cr(III) in soils. Then, the transport behavior and mechanism of Cr(III)-TA complexes in soil was clarified. Dialysis results showed that the increase of TA concentration and solution pH promoted the formation of complexed Cr(III). The results of UV–Vis absorption spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations indicated that the adjacent ionized phenolic hydroxyls in TA functioned as the binding sites with Cr(III) to form the Cr–O bonds and the degree of complexation increased with pH. The Cr(III)-TA complexes had higher solubility than free Cr(III) at pH ≥ 6.0. Batch sorption experiments demonstrated that the sorption capacity of Cr(III)-TA to soils with different pH was always lower than that of free Cr(III). These reasons led to the stronger mobility of Cr(III)-TA in soil columns than Cr(III). Our research reveals that the enhanced mobility of Cr(III) in soils coexisting with TA.
Show more [+] Less [-]Effect of exposures to mixtures of lead and various metals on hypertension, pre-hypertension, and blood pressure: A cross-sectional study from the China National Human Biomonitoring
2022
Qu, Yingli | Lv, Yuebin | Ji, Saisai | Ding, Liang | Zhao, Feng | Zhu, Ying | Zhang, Wenli | Hu, Xiaojian | Lu, Yifu | Li, Yawei | Zhang, Xu | Zhang, Mingyuan | Yang, Yanwei | Li, Chengcheng | Zhang, Miao | Li, Zheng | Chen, Chen | Zheng, Lei | Gu, Heng | Zhu, Huijuan | Sun, Qi | Cai, Jiayi | Song, Shixun | Ying, Bo | Lin, Shaobin | Cao, Zhaojin | Liang, Donghai | Ji, John S. | Ryan, P Barry | Barr, Dana Boyd | Shi, Xiaoming
We aimed to explore the effects of mixtures of lead and various metals on blood pressure (BP) and the odds of pre-hypertension (systolic blood pressure (SBP) 120–139 mmHg, and/or diastolic blood pressure (DBP) 80–89 mmHg) and hypertension (SBP/DBP ≥140/90 mmHg) among Chinese adults in a cross-sectional study. This study included 11,037 adults aged 18 years or older from the 2017–2018 China National Human Biomonitoring. Average BP and 13 metals (lead, antimony, arsenic, cadmium, mercury, thallium, chromium, cobalt, molybdenum, manganese, nickel, selenium, and tin) in blood and urine were measured and lifestyle and demographic data were collected. Weighted multiple linear regressions were used to estimate associations of metals with BP in both single and multiple metal models. Weighted quantile sum (WQS) regression was performed to assess the relationship between metal mixture levels and BP. In the single metal model, after adjusting for potential confounding factors, the blood lead levels in the highest quartile were associated with the greater odds of both pre-hypertension (odds ratio (OR): 1.56, 95% CI: 1.22–1.99) and hypertension (OR:1.75, 95% CI: 1.28–2.40) when compared with the lowest quartile. We also found that blood arsenic levels were associated with increased odds of pre-hypertension (OR:1.31, 95% CI:1.00–1.74), while urinary molybdenum levels were associated with lower odds of hypertension (OR:0.68, 95% CI:0.50–0.93). No significant associations were found for the other 10 metals. WQS regression analysis showed that metal mixture levels in blood were significantly associated with higher SBP (β = 1.56, P < 0.05) and DBP (β = 1.56, P < 0.05), with the largest contributor being lead (49.9% and 66.8%, respectively). The finding suggests that exposure to mixtures of metals as measured in blood were positively associated with BP, and that lead exposure may play a critical role in hypertension development.
Show more [+] Less [-]ALS risk factors: Industrial airborne chemical releases
2022
Andrew, Angeline | Zhou, Jie | Gui, Jiang | Shi, Xun | Li, Meifang | Harrison, Antoinette | Guetti, Bart | Nathan, Ramaa | Butt, Tanya | Peipert, Daniel | Tischbein, Maeve | Pioro, Erik P. | Stommel, Elijah | Bradley, Walter
Most amyotrophic lateral sclerosis (ALS) cases are sporadic (∼90%) and environmental exposures are implicated in their etiology. Large industrial facilities are permitted the airborne release of certain chemicals with hazardous properties and report the amounts to the US Environmental Protection Agency (EPA) as part of its Toxics Release Inventory (TRI) monitoring program. The objective of this project was to identify industrial chemicals released into the air that may be associated with ALS etiology. We geospatially estimated residential exposure to contaminants using a de-identified medical claims database, the SYMPHONY Integrated Dataverse®, with ∼26,000 nationally distributed ALS patients, and non-ALS controls matched for age and gender. We mapped TRI data on industrial releases of 523 airborne contaminants to estimate local residential exposure and used a dynamic categorization algorithm to solve the problem of zero-inflation in the dataset. In an independent validation study, we used residential histories to estimate exposure in each year prior to diagnosis. Air releases with positive associations in both the SYMPHONY analysis and the spatio-temporal validation study included styrene (false discovery rate (FDR) 5.4e-5), chromium (FDR 2.4e-4), nickel (FDR 1.6e-3), and dichloromethane (FDR 4.8e-4). Using a large de-identified healthcare claims dataset, we identified geospatial environmental contaminants associated with ALS. The analytic pipeline used may be applied to other diseases and identify novel targets for exposure mitigation. Our results support the future evaluation of these environmental chemicals as potential etiologic contributors to sporadic ALS risk.
Show more [+] Less [-]A remote sensing framework to map potential toxic elements in agricultural soils in the humid tropics
2022
de Sousa Mendes, Wanderson | Demattê, José A.M. | de Resende, Maria Eduarda B. | Chimelo Ruiz, Luiz Fernando | César de Mello, Danilo | Fim Rosas, Jorge Tadeu | Quiñonez Silvero, Nélida Elizabet | Ferracciú Alleoni, Luís Reynaldo | Colzato, Marina | Rosin, Nícolas Augusto | Campos, Lucas Rabelo
Soil contamination by potentially toxic elements (PTEs) is one of the greatest threats to environmental degradation. Knowing where PTEs accumulated in soil can mitigate their adverse effects on plants, animals, and human health. We evaluated the potential of using long-term remote sensing images that reveal the bare soils, to detect and map PTEs in agricultural fields. In this study, 360 soil samples were collected at the superficial layer (0–20 cm) in a 2574 km² agricultural area located in São Paulo State, Brazil. We tested the Soil Synthetic Image (SYSI) using Landsat TM/ETM/ETM+, Landsat OLI, and Sentinel 2 images. The three products have different spectral, temporal, and spatial resolutions. The time series multispectral images were used to reveal areas with bare soil and their spectra were used as predictors of soil chromium, iron, nickel, and zinc contents. We observed a strong linear relationship (−0.26 > r > −0.62) between the selected PTEs and the near infrared (NIR) and shortwave infrared (SWIR) bands of Sentinel (ensemble of 4 years of data), Landsat TM (35 years data), and Landsat OLI (4 years data). The clearest discrimination of soil PTEs was obtained from SYSI using a long term Landsat 5 collection over 35 years. Satellite data could efficiently detect the contents of PTEs in soils due to their relation with soil attributes and parent materials. Therefore, distinct satellite sensors could map the PTEs on tropics and assist in understanding their spatial dynamics and environmental effects.
Show more [+] Less [-]Chromium in plant growth and development: Toxicity, tolerance and hormesis
2022
López-Bucio, Jesús Salvador | Ravelo-Ortega, Gustavo | López-Bucio, José
Research over the last three decades showed that chromium, particularly the oxyanion chromate Cr(VI) behaves as a toxic environmental pollutant that strongly damages plants due to oxidative stress, disruption of nutrient uptake, photosynthesis and metabolism, and ultimately, represses growth and development. However, mild Cr(VI) concentrations promote growth, induce adventitious root formation, reinforce the root cap, and produce twin roots from single root meristems under conditions that compromise cell viability, indicating its important role as a driver for root organogenesis. In recent years, considerable advance has been made towards deciphering the molecular mechanisms for root sensing of chromate, including the identification of regulatory proteins such as SOLITARY ROOT and MEDIATOR 18 that orchestrate the multilevel dynamics of the oxyanion. Cr(VI) decreases the expression of several glutamate receptors, whereas amino acids such as glutamate, cysteine and proline confer protection to plants from hexavalent chromium stress. The crosstalk between plant hormones, including auxin, ethylene, and jasmonic acid enables tissues to balance growth and defense under Cr(VI)-induced oxidative damage, which may be useful to better adapt crops to biotic and abiotic challenges. The highly contrasting responses of plants manifested at the transcriptional and translational levels depend on the concentration of chromate in the media, and fit well with the concept of hormesis, an adaptive mechanism that primes plants for resistance to environmental challenges, toxins or pollutants. Here, we review the contrasting facets of Cr(VI) in plants including the cellular, hormonal and molecular aspects that mechanistically separate its toxic effects from biostimulant outputs.
Show more [+] Less [-]A synthesis framework using machine learning and spatial bivariate analysis to identify drivers and hotspots of heavy metal pollution of agricultural soils
2021
Yang, Shiyan | Taylor, David | Yang, Dong | He, Mingjiang | Liu, Xingmei | Xu, Jianming
Source apportionment can be an effective tool in mitigating soil pollution but its efficacy is often limited by a lack of information on the factors that influence the accumulation of pollutants at a site. In response to this limitation and focusing on a suite of heavy metals identified as priorities for pollution control, the study established a comprehensive pollution control framework using factor identification coupled with spatial agglomeration for agricultural soils in an industrialized part of Zhejiang Province, China. In addition to elucidating the key role of industrial and traffic activities on heavy metal accumulation through implementing a receptor model, specific influencing factors were identified using a random forest model. The distance from the soil sample location to the nearest likely industrial source was the most important factor in determining cadmium and copper concentrations, while distance to the nearest road was more important for lead and zinc pollution. Soil parent materials, pH, organic matter, and clay particle size were the key factors influencing accumulation of arsenic, chromium, and nickel. Spatial auto-correlation between levels of soil metal pollution and industrial agglomeration can enable a more targeted approach to pollution control measures. Overall, the approach and results provide a basis for improved accuracy in source apportionment, and thus improved soil pollution control, at the regional scale.
Show more [+] Less [-]Metal lability and environmental risk in anthropogenically disturbed Antarctic melt streams
2021
Koppel, Darren J. | Bishop, Jordan | Kopalová, Kateřina | Price, Gwilym A.V. | Brown, Kathryn E. | Adams, Merrin S. | King, Catherine K. | Jolley, Dianne F.
Antarctic melt streams are important ecosystems that increasingly face contaminant pressures from anthropogenic sources. Metal contaminants are often reported in the limno-terrestrial environment but their speciation is not well characterised, making environmental risk assessments difficult. This paper characterises labile metal concentrations in five melt streams and three shallow lakes around the Casey and Wilkes research stations in East Antarctica using chemical extracts and field deployments of diffusive gradients in thin-film (DGT) samplers. An acute toxicity test with field-collected Ceratadon purpeus and taxonomic identification of diatoms in melt streams were used to infer environmental risk. Copper and zinc were the most labile metals in the melt streams. DGT-labile copper concentrations were up to 3 μg Cu L⁻¹ in melt-stream waters but not labile below the sediment-water interface. DGT-labile zinc concentrations were consistent above and below the sediment-water interface at concentrations up to 14 μg Zn L⁻¹ in four streams, but one stream showed evidence of zinc mineralisation in the sediment with a flux to overlying and pore waters attributed to the reductive dissolution of iron and manganese oxides. Other metals, such as chromium, nickel, and lead were acid-extractable from the sediments, but not labile in pore waters or overlying waters. All streams had unique compositions of freshwater diatoms, but one had particularly reduced diversity and richness, which correlated to metal contamination and sediment physico-chemical properties such as a finer particle size. In laboratory bioassays with field-collected samples of the Antarctic moss C. purpeus, there was no change in photosynthetic efficiency following 28-d exposure to 700, 900, 1060, or 530 μg L⁻¹ of cadmium, copper, nickel, and zinc, respectively. This study shows that microorganisms such as diatoms may be at greater risk from contaminants than mosses, and highlights the importance of geochemical factors controlling metal lability.
Show more [+] Less [-]