In urban cities in Southern China, the tissue S/N ratios of epilithic mosses (Haplocladium microphyllum), varied widely from 0.11 to 0.19, are strongly related to some atmospheric chemical parameters (e.g. rainwater SO42−/NH4+ ratios, each people SO2 emission). If tissue S/N ratios in the healthy moss species tend to maintain a constant ratio of 0.15 in unpolluted area, our study cities can be divided into two classes: class I (S/N > 0.15, S excess) and class II (S/N < 0.15, N excess), possibly indicative of stronger industrial activity and higher density of population, respectively. Mosses in all these cities obtained S and N from rainwater at a similar ratio. Sulphur and N isotope ratios in mosses are found significantly linearly correlated with local coal δ34S and NH4+–N wet deposition, respectively, indicating that local coal and animal NH3 are the major atmospheric S and N sources.

This study has evaluated urban habitat quality by studying specific leaf area (SLA) and stomatal characteristics of the common herb Plantago lanceolata L. SLA and stomatal density, pore surface and resistance were measured at 169 locations in the city of Gent (Belgium), distributed over four land use classes, i.e., sub-urban green, urban green, urban and industry. SLA and stomatal density significantly increased from sub-urban green towards more urbanised land use classes, while the reverse was observed for stomatal pore surface. Stomatal resistance increased in the urban and industrial land use class in comparison with the (sub-) urban green, but differences between land use classes were less pronounced. Spatial distribution maps for these leaf characteristics showed a high spatial variation, related to differences in habitat quality within the city. Hence, stomatal density and stomatal pore surface are assumed to be potentially good bio-indicators for urban habitat quality. Stomatal characteristics of Plantago lanceolata can be used for biomonitoring of urban habitat quality.

Urban soils are an essential element of the city environment. However, studies on urban soils are scattered in terms of geographical distribution, sampling pattern, analytical dataset, etc. One of the major issues arising from the studies on this ecosystem is the diffusion of its contamination. In cities, in fact, the proximity to humans may cause a serious danger for citizens. In the present study, results from the literature about trace elements in urban soils are presented to compare methodologies and results and to offer a basis for the harmonization of investigation approaches and establishment of remediation thresholds. A total of 153 studies on the urban ecosystem published in the last 10 years were collected and data on trace elements in soils of 94 world cities were compared and discussed. Data highlights the discrepancies among different studies (sampling strategies, analytical procedures) and the extreme variability of urban soils. Most cities are contaminated by one or more trace elements, revealing the environmental relevance of the urban soil system. While Pb is still one of the major concerns in many locations, new contaminants are on the rise and would deserve more attention from the researchers. While in fact some contaminants are almost ubiquitous in world cities and could be used as tracers for urban contamination, some traffic-related elements such as platinum, rhodium, and palladium, whose reactivity and toxicity is still unknown, are becoming of concern. Collation of literature data highlights the need for the harmonization of sampling, analytical, and rendering procedures for regulatory purposes and provides a useful dataset for environmental scientists dealing with the urban ecosystem and for city planners. A sampling design adapted to local urban patterns, a prescribed sampling depth, and a minimum set of elements that deserve to be measured could be the core of a common methodology.

Modern European cities are characterized by high particulate matter (PM) concentrations. Unfortunately, the number of stations monitoring air pollution, especially PM, is never sufficient for the overall representation of the problem. In the present work, an inexpensive outdoor passive sampler (based on an indoor passive sampler) was developed and assembled in an effort to provide the means to extend current PM monitoring networks. The uncertainty of the sampler was tested in vitro and in vivo. Twenty such outdoor passive samplers were assembled and installed at specific locations in the Greater Thessaloniki Area and measurements of PM were carried out. The results were in good agreement with the official monitoring stations. In addition, they revealed the aggravated air quality in the center of the city and in the west suburbs.

Diplopods feed organic matter in decomposition; however, some environmental factors can promote changes in tissues of these animals. Sewage sludge has been applied for recuperation of physical structure of degraded soil. This work analyzed the influence of the sludge from a city of São Paulo in the midgut of the diplopod Rhinocricus padbergi. After the exposition to sludge, the midgut was prepared for histological and ultra-structural analyses. After 1 week of exposition, there were various glycoprotein globules in the fat body, which appeared, ultrastructurally, little electron dense. In the animals exposed for 2 weeks, there was an intensive renovation of the epithelium with the invasion of regenerative cells, which was observed in the histological and ultra-structural analyses. These data showed that the sludge present various substances that were very hazardous for these animals; more studies were necessary before the application of this in agriculture.

This study focuses on the distribution of selected trace metals, 137Cs and 210Pb, in floodplain deposits of the lowland Warta River (southern Poland) downstream of Częstochowa, a large city with an iron smelter. The depth profiles of trace metal (Zn, Pb, Cu, Ni, Cd and Mn), 210Pb and 137Cs contents in floodplain sediments were used to derive deposition rates on the floodplain for the twentieth century. The applicability of particular chronometric tools is considered within the context of their mutual relationships and confirmed by the consistency of the results. Deposition rate estimates for the past 50 years based on the vertical patterns of trace metal concentrations, which were correlated with particular events in the development of the smelter, range from 0.4 cm·year−1 in profiles situated in backswamps far from the channel to over 1.1 cm·year−1 in profiles of the natural levee adjacent to the river. Deposition rates based on 210Pb inventories in the profiles range from 0.08 to 0.66 g·cm−2·year−1, which corresponds to linear sedimentation rates of 0.10 to 0.91 cm·year−1, respectively. Dating of characteristic levels associated with peak fallout of 137Cs gives sediment accretion rates resembling those obtained from trace metals and 210Pb. The period of the highest sediment accumulation rate could be related to the highest loads of effluent from the iron smelter and city of Częstochowa, which were substantially reduced after the construction of effluent treatment plant.

Ambient aerosol concentrations have been implicated in human health effects, in visibility reduction in urban and regional areas, in acid deposition and in perturbing the Earth’s radiation balance. The main concern of the air quality managers is to achieve compliance to the established air quality standards (AQS). As AQS are exceeded in numerous sites worldwide, it is essential to reduce the emissions. Having decided which statistical distribution fits well to the PM10 parent distribution, it is feasible to estimate the reduction in emissions that is required in order to meet AQS. In this study, it is verified that the PM10 concentration distribution can be adequately simulated by lognormal distribution, a conclusion drawn by the calculation of several statistical indexes. The study area is the city of Volos in central Greece, which is experiencing an unpleasant situation concerning the levels of PM10 pollution. The probability density function of lognormal distribution is capable to predict the number of days when the European Union (EU) AQS for PM10 concentration are exceeded in Volos area. Furthermore, the minimum reduction in current emission sources of PM10 required in order to meet the air quality regulations that are established by the EU is calculated for the study area and is found to be ~33%. The results could be utilized as reference for air pollution control strategy.

The city of La Plata and its surroundings are a very populated area, which has an important Industrial Pole and intense traffic activity but environmental studies have been rare so far. This article presents and discusses the importance of wind frequencies and velocities for the transport of air pollutants. The study emphasizes the importance of knowing wind patterns on an hourly basis that can be helpful for designing a monitoring network as well as for preventing exposure to pollutants. Correlation between monthly SO₂ concentrations and wind frequencies and velocities are discussed for a particular set of directions NNW-NE that carry pollutants from industrial sources toward populated areas. As a result, averaged wind frequencies have been found to be very important for determining patterns influencing pollutants transport; the influence of averaged velocities has shown low variability (hourly and monthly). Hierarchical cluster analysis applied to wind roses provided a useful approach for analyzing and describing the general daily occurrence of winds.

A monitoring program of particulate matter was conducted at eight sampling sites in four highly industrialized cities (Shenyang, Anshan, Fushun, and Jinzhou) of Liaoning Province in Northeast China to identify the major potential sources of ambient PM₂.₅. A total of 814 PM₂.₅ and PM₂.₅₋₁₀ samples were collected between 2004 and 2005. All PM samples were collected simultaneously in four cities and analyzed gravimetrically for mass concentrations. A sum of 16 elemental species concentrations in the PM samples were determined using inductively coupled plasma atomic emission spectroscopy. Annual means of PM₂.₅ concentrations ranged from 65.0 to 222.0 μg m⁻³ in all the eight sampling sites, and the spatial and seasonal variations were discussed. Enrichment factors were calculated, and Cr, Cu, Zn, As, Cd, and Pb will be pollution-derived elements. Site-to-site comparisons of PM₂.₅ species in each city were examined using coefficient of divergence, revealing that the two sites in each city are similar in elemental species. Principle component analysis was used for preliminary source analysis of PM₂.₅. Three or four factors in each city were isolated, and similar sources (crustal source, coal combustion, vehicle exhaust, iron making, or some other metallurgical activities) were identified at four cities.

Climatic changes and the increased air pollution intensify the atmospheric degradation of stone, affecting the aspect and integrity of valuable historical buildings constructed using limestone and located in tropical coastal sites. This paper analyzes limestone degradation process due to air pollution and humidity in tropical humid conditions in historical buildings located in the cities of Havana, Cuba and San Francisco de Campeche, Mexico. Havana shows higher pollution level than San Francisco de Campeche, which presents pollution levels as a consequence of a multipollutant situation along with the presence of airborne salinity. Temperature and humidity data were recorded from the walls of historical buildings in the city of Havana: the Minor Basilica and the convent of San Francisco. Changes in dry/wet cycles due to the absence of direct sun radiation as well as a high level of SO₂ allow the formation of a black crust (mainly composed of gypsum) in the lower part of the surface of the facade of the Basilica Minor in Havana; however, crusts formed in historical buildings located in San Francisco de Campeche City are mainly composed of calcium carbonate, indicating the importance of natural degradation mechanisms mainly due to dissolution in water. In the last case, the influence of water plays an important role in the development of biodegradation, which induces the formation of calcium oxalates. Caves and cracks were found in the walls of military buildings caused by water infiltration. The influence of air contamination, humidity, and construction materials determine the type of degradation that historical buildings undergo.