Bacteria–phyllosilicate complexes are commonly found in natural environments and are capable of immobilizing trace metals. However, the molecular binding mechanisms of heavy metals to these complex aggregates still remain poorly understood. This study investigated Cd adsorption on Gram-positive Bacillus subtilis, Gram-negative Pseudomonas putida and their binary mixtures with montmorillonite using surface complexation model, Cd K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy and isothermal titration calorimetry (ITC). We have shown that larger amounts of Cd are adsorbed by B. subtilis than by P. putida at pH<∼6, and Cd sorption that binding to phosphate groups plays a more important role in P. putida than in B. subtilis. This remind us that we should consider the microbe species when predict the biochemical behavior of trace metals in microbe-bearing environments. The observed Cd adsorption on the binary bacteria–clay composites was more than that predicted based on the component additivity approach. When taking bacteria–clay (1:1 mass ratio) as a representative example, an approximately 68%:32% metal distribution between the bacterial and mineral fraction was found. Both the EXAFS and ITC fits showed that the binding stoichiometry for Cd-carboxyl/phosphate was smaller in the binary mixtures than that in pure bacteria. We proposed that the significant deviations were possibly due to the physical-chemical interaction between the composite fractions that might reduce the agglomeration of the clay grains, increase the negative surface charges, and provide additional bridging of metals ions between bacterial cells and clays.

Bioremediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils requires a higher microbial viability and an increased PAH bioavailability. The clay/modified clay-modulated bacterial degradation could deliver a more efficient removal of PAHs in soils depending on the bioavailability of the compounds. In this study, we modified clay minerals (smectite and palygorskite) with mild acid (HCl) and alkali (NaOH) treatments (0.5–3 M), which increased the surface area and pore volume of the products, and removed the impurities without collapsing the crystalline structure of clay minerals. In soil incubation studies, supplements with the clay products increased bacterial growth in the order: 0.5 M HCl ≥ unmodified ≥0.5 M NaOH ≥3 M NaOH ≥3 M HCl for smectite, and 0.5 M HCl ≥3 M NaOH ≥0.5 M NaOH ≥3 M HCl ≥ unmodified for palygorskite. A14C-tracing study showed that the mild acid/alkali-treated clay products increased the PAH biodegradation (5–8%) in the order of 0.5 M HCl ≥ unmodified > 3 M NaOH ≥ 0.5 M NaOH for smectite, and 0.5 M HCl > 0.5 M NaOH ≥ unmodified ≥ 3 M NaOH for palygorskite. The biodegradation was correlated (r = 0.81) with the bioavailable fraction of PAHs and microbial growth as affected particularly by the 0.5 M HCl and 0.5 M NaOH-treated clay minerals. These results could be pivotal in developing a clay-modulated bioremediation technology for cleaning up PAH-contaminated soils and sediments in the field.

Microplastics (plastic particles, 0.1 μm–5 mm in size) are widespread marine pollutants, accumulating in benthic sediments and shorelines the world over. To gain a clearer understanding of microplastic availability to marine life, and the risks they pose to the health of benthic communities, ecological processes and food security, it is important to obtain accurate measures of microplastic abundance in marine sediments. To date, methods for extracting microplastics from marine sediments have been disadvantaged by complexity, expense, low extraction efficiencies and incompatibility with very fine sediments.Here we present a new, portable method to separate microplastics from sediments of differing types, using the principle of density floatation. The Sediment-Microplastic Isolation (SMI) unit is a custom-built apparatus which consistently extracted microplastics from sediments in a single step, with a mean efficiency of 95.8% (±SE 1.6%; min 70%, max 100%). Zinc chloride, at a density of 1.5 g cm−3, was deemed an effective and relatively inexpensive floatation media, allowing fine sediment to settle whilst simultaneously enabling floatation of dense polymers. The method was validated by artificially spiking sediment with low and high density microplastics, and its environmental relevance was further tested by extracting plastics present in natural sediment samples from sites ranging in sediment type; fine silt/clay (mean size 10.25 ± SD 3.02 μm) to coarse sand (mean size 149.3 ± SD 49.9 μm). The method presented here is cheap, reproducible and is easily portable, lending itself for use in the laboratory and in the field, eg. on board research vessels. By employing this method, accurate estimates of microplastic type, distribution and abundance in natural sediments can be achieved, with the potential to further our understanding of the availability of microplastics to benthic organisms.

Chlorotriazine herbicides (CTs) are widely used pest control chemicals. In contrast to groundwater contamination, little attention has been given to the circumstances of residue formation of parent compounds and transformation products in soils.Seventy-five cultivated floodplain topsoils in the Czech Republic were sampled in early spring of 2015, corresponding to a minimum of six months (current-use terbuthylazine, TBA) and a up to a decade (banned atrazine, AT and simazine, SIM) after the last herbicide application. Soil residues of parent compounds and nine transformation products were quantified via multiple residue analysis using liquid chromatography - tandem mass spectrometry of acetonitrile partitioning extracts (QuEChERS). Using principal component analysis (PCA), their relation to soil chemistry, crops and environmental parameters was determined.Of the parent compounds, only TBA was present in more than one sample. In contrast, at least one CT transformation product, particularly hydroxylated CTs, was detected in 89% of the sites, or 54% for banned triazines. Deethylated and bi-dealkylated SIM or AT residues were not detectable. PCA suggests the formation and/or retention of CT hydroxy-metabolite residues to be related to low soil pH, and a direct relation between TBA and soil organic carbon, and between deethyl-TBA and clay or Ca contents, respectively, the latter pointing towards distinct sorption mechanisms. The low historic application of simazine contrasted by the high abundance of its residues, and the co-occurrence with AT residues suggests the post-ban application of AT and SIM banned triazines as a permitted impurity of TBA formulations as a recent, secondary source.The present data indicate that topsoils do not contain abundant extractable residues of banned parent chlorotriazines, and are thus likely not the current source for related ground- and surface water contamination. In contrast, topsoils might pose a long-term source of TBA and CT transformation products for ground and surface water contamination.

A bioflocculant-producing bacterial strain, designated MSI021, was isolated from the marine sponge Dendrilla nigra and demonstrated 94% flocculation activity in a kaolin clay suspension. MSI021 was identified as Bacillus cereus based on phylogenetic affiliation and biochemical characteristics. The purified extra-cellular bioflocculant was chemically elucidated as a polysaccharide molecule. The polysaccharide bioflocculant was stable under both acidic and alkaline conditions (pH 2.0–10.0) and temperatures up to 100 °C. The purified bioflocculant efficiently nucleated the formation of silver nanoparticles which showed broad spectrum antibacterial activity. The ability of the bioflocculant to remediate heavy metal toxicity was evaluated by measuring the inhibition of bioluminescence expression in Vibrio harveyi. Enrichment of heavy metals such as zinc, mercury and copper at concentrations of 1, 2 and 3 mM in culture media showed significant reduction of bioluminescence in Vibrio, whereas media enriched with heavy metals and bioflocculant showed dose dependent improvement in the expression of bioluminescence. The assay results demonstrated that the polysaccharide bioflocculant effectively mitigates heavy metal toxicity, thereby improving the expression of bioluminescence in Vibrio. This bioluminescence reporter assay can be developed into a high-throughput format to monitor and evaluate of heavy metal toxicity. The findings of this study revealed that a novel polysaccharide bioflocculant produced by a marine B. cereus demonstrated strong flocculating performance and was effective in nucleating the formation antibacterial silver nanoparticles and removing heavy metals. These results suggest that the MSI021 polysaccharide bioflocculant can be used to develop greener waste water treatment systems.

This study is the first quantitative report on petroleum biomarkers from the coral reefs systems of the Persian Gulf. 120 reef surface sediment samples from ten fragile coral reef ecosystems were collected and analyzed for grain size, biogenic elements, elemental ratios, and petroleum biomarkers (n-alkanes, PAHs¹ and Hopanes) to assess the sources and early diagenesis of sedimentary organic matter. The mean grain size of the reef sediments ranged from 13.56 to 37.11% (Clay), 26.92 to 51.73% (Sand) and 35.97 to 43.85% (Silt). TOC² (3.35–9.72 mg.g⁻¹) and TON³ (0.4–1.10 mg.g⁻¹) were identified as influencing factors on the accumulation of petroleum hydrocarbons, whilst BC⁴ (1.08–3.28 mg.g⁻¹) and TIN⁵ (0.13–0.86) did not exhibit any determining effect. Although BC and TIN demonstrated heterogeneous spatial distribution, TOC and TON indicated homogenous distribution with continually upward trend in concentration from the east to west ward of the Gulf. The mean calculated TOC/TN ratios vacillated according to the stations (p < 0.05) from 2.96 at Shidvar Island to 8.64 at Hengam Island. The high TOC/TN ratios were observed in the Hengam (8.64), Kharg (8.04) and Siri (6.29), respectively, suggesting a predominant marine origin. The mean concentrations of ∑C11–35n-alkanes, ∑30 PAHs and ∑9Hopanes were found in the ranges of 385–937 μg.g⁻¹dw, (overall mean:590 μg.g⁻¹dw), 326–793 ng.g⁻¹dw (499 ng.g⁻¹dw), 88 to 568 ng.g⁻¹ d (258 ng.g⁻¹dw), respectively. Higher concentrations of detected petroleum biomarkers in reef sediments were chiefly distributed near main industrial areas, Kharg, Lavan and Siri, whilst the lower concentrations were in Hormoz and Qeshm. In addition, one-way ANOVA⁶ analysis demonstrated considerably significant differences (p < 0.05) among concentration of detected total petroleum hydrocarbons between most sampling locations. Some sampling sites especially Kharg, Lavan, Siri and Lark indicated higher concentration of n-alkanes due to the higher maintenance of organic matter by high clay content in the sediments. Furthermore, most sediment samples, except for Hormoz, Qeshm and Hengam showed an even carbon preference for n-alkanes which could be correlated to bacterial input. NPMDS⁷ analysis also demonstrated that among the congeners of petroleum biomarkers, n-C12,n-C14, n-C16,n-C18 and n-C20 for n-alkanes, Phe⁸ and Naph⁹ along with their Alkyl homologues for PAHs (2–3 rings accounted for 60%) and C30αβ and C29αβ for Hopanes were discriminated from their other congeners in the whole study area. Our results based on the PCA¹⁰ analysis and diagnostic indices of AHs¹¹ and PAHs along with ring classification of PAHs, in addition, the ubiquitous presence of UCM,¹² and Hopanes revealed that the main sources of the pollution were petroleum and petroleum combustion mainly from offshore oil exploration and extraction, discharge of pollutants from shipping activities.

Glyphosate is one of the most used herbicides in agricultural lands worldwide. Wind-eroded sediment and dust, as an environmental transport pathway of glyphosate and of its main metabolite aminomethylphosphonic acid (AMPA), can result in environmental- and human exposure far beyond the agricultural areas where it has been applied. Therefore, special attention is required to the airborne transport of glyphosate and AMPA. In this study, we investigated the behavior of glyphosate and AMPA in wind-eroded sediment by measuring their content in different size fractions (median diameters between 715 and 8 μm) of a loess soil, during a period of 28 days after glyphosate application. Granulometrical extraction was done using a wind tunnel and a Soil Fine Particle Extractor. Extractions were conducted on days 0, 3, 7, 14, 21 and 28 after glyphosate application. Results indicated that glyphosate and AMPA contents were significantly higher in the finest particle fractions (median diameters between 8 and 18 μm), and lowered significantly with the increase in particle size. However, their content remained constant when aggregates were present in the sample. Glyphosate and AMPA contents correlated positively with clay, organic matter, and silt content. The dissipation of glyphosate over time was very low, which was most probably due to the low soil moisture content of the sediment. Consequently, the formation of AMPA was also very low. The low dissipation of glyphosate in our study indicates that the risk of glyphosate transport in dry sediment to off-target areas by wind can be very high. The highest glyphosate and AMPA contents were found in the smallest soil fractions (PM10 and less), which are easily inhaled and, therefore, contribute to human exposure.

Previous studies suggested that the removal of Ulva microscopic propagules (UMP) from cradle water might restrict the formation and expansion of green tides in the Yellow Sea, China. In this study, the distribution characteristics of UMP in the southern Yellow Sea was investigated, and then a flocculation experiment of UMP using modified clay (MC) was conducted at a selected station of the research cruise. The results indicated that the distribution of green algae thalli is one of the main factors that directly influence UMP distribution. UMP density was strongly negatively correlated with the distance between the sampling station and the centre of the area containing floating Ulva (r=−0.618***, n=83). >80% of the UMP was removed from the water column after MC application at a concentration of 0.1g/L, and MC applied at a concentration of 0.5g/L reduced the germination rate to 0.3%.

Mangrove forests play an important role in biogeochemical cycle of C, storing large amounts of organic carbon. However, these functions can be controlled by the high spatial heterogeneity of these intertidal environments. In this study were performed an intensive sampling characterizing mangrove soils under different type of vegetation (Rhizophora/Avicennia/dead mangrove) in the Venezuelan coast. The soils were anoxic, with a pH~7; however other soil parameters varied widely (e.g., clay, organic carbon). Dead mangrove area showed a significant lower amounts of total organic carbon (TOC) (6.8±2.2%), in comparison to the well-preserved mangrove of Avicennia or Rhizophora (TOC=17–20%). Our results indicate that 56% of the TOC was lost within a period of 10years and we estimate that 11,219kgm−2 of CO2 was emitted as a result of the mangrove death. These results represent an average emission rate of 11.2±19.17tCO2ha−1y−1.

Being the most reactive of all chemical elements and the lightest member of halogen group, fluorine is found in the environment as fluoride. Both natural and anthropogenic activities are responsible for fluoride contamination in groundwater. Fluoride has dual effect on human health. While lower concentration (<0.5 mg/L) is responsible for dental fluorosis, higher concentration (>1.5 mg/L) leads to skeletal fluorosis and even death. The present review paper is aimed at providing detailed occurrence of fluoride pollution around the globe and in India. Among the different defluoridation techniques to remove excess fluoride from contaminated drinking water at both community and domestic levels, adsorption is found to be very effective due to its technical feasibility, simple characteristics and comparative low-cost nature. Various adsorbents have been tested for their ability to treat fluoride contaminated water, viz., activated carbon, activated alumina, soil, clay and a variety of waste materials. Since fluoride pollution of drinking water is a major concern of poor people as they cannot afford to spend on purification of water, usage of low-cost natural mineral (natural mineral) as adsorbent for fluoride removal is one of the most essential issues in modern era. The present review bestows a detailed discussion on natural mineral as adsorbent used in defluoridation process with special emphasis on soil and low-cost clay minerals.