Information regarding chemical pollutant levels in farmed fish and shellfish, along with the risks associated with their consumption is still scarce. This study was designed to assess levels of exposure to 21 trace elements in fish (Dicentrarchus labrax), mussels (Mytilus galloprovincialis) and oysters (Crassostrea gigas) collected from aquaculture marine ecosystems of the northwestern Mediterranean Sea. Metal concentrations showed great variability in the three species; the highest values of the nonessential elements As and Cd were found in oysters while the highest levels of Al, Pb and V were found in mussels. The essential elements Cu, Mn and Zn were highest in oysters, but Fe, Cr, Ni, Se, Co and Mo levels were highest in mussels. Fish had the lowest concentrations for all trace elements, which were at least one order of magnitude lower than in bivalves. The rare earth elements cerium and lanthanum were found at higher levels in mussels than in oysters, but undetectable in fish. The maximum values set by European regulations for Hg, Cd and Pb were never exceeded in the examined samples. However, comparing the estimated human daily intakes (EHDIs) with the suggested tolerable copper and zinc intakes suggested a potential risk for frequent consumers of oysters. Similarly, people who consume high quantities of mussels could be exposed to concentrations of Al that exceed the proposed TWI (tolerable weekly intake).

Mining and smelting activities have contaminated the environment with trace metals (TMs) at a worldwide scale for at least two millennia. A combination of chemical approaches and active biomonitoring was performed to analyse the environmental availability and bioavailability of TM palaeo-pollution in a former PbAg mining district in the Vosges Mountains, France. Along a soil TM contamination gradient that covered eight stations, including two archaeological mining sites, the toxicokinetics of six TMs (Pb, Cd, As, Ag, Co, Sb) in the snail Cantareus aspersus revealed that palaeo-pollution from the studied sites remains bioavailable. This study provides the first data on the accumulation kinetics of Ag and Co for C. aspersus. The environmental availability of the TMs was estimated with three chemical extraction methods (aqua regia, EDTA 50 mM, CaCl2 10 mM). Univariate regression analyses showed that EDTA extraction is the best method for estimating the bioavailability of Pb, As, Ag, Co and Sb to snails. None of the three extractants was efficient for Cd. A multivariate analysis of bioaccumulation data revealed that TM bioavailability and transfer were modulated by exposure sources (soil, humus and vegetation) rather than by soil physico-chemical characteristics. Hence, although the deposition of mining wastes dates back several centuries, these wastes still represent a source of contamination that must be considered to develop relevant site management and environmental risk assessment.

Heavy metals (Cr, Co, Ni, As, Cd, and Pb) can be bound to PM adversely affecting human health. Quantifying the source impacts on heavy metals can provide source-specific estimates of the heavy metal health risk (HMHR) to guide effective development of strategies to reduce such risks from exposure to heavy metals in PM2.5 (particulate matter (PM) with aerodynamic diameter less than or equal to 2.5 μm). In this study, a method combining Multilinear Engine 2 (ME2) and a risk assessment model is developed to more effectively quantify source contributions to HMHR, including heavy metal non-cancer risk (non-HMCR) and cancer risk (HMCR). The combined model (called ME2-HMHR) has two steps: step1, source contributions to heavy metals are estimated by employing the ME2 model; step2, the source contributions in step 1 are introduced into the risk assessment model to calculate the source contributions to HMHR. The approach was applied to Huzou, China and five significant sources were identified. Soil dust is the largest source of non-HMCR. For HMCR, the source contributions of soil dust, coal combustion, cement dust, vehicle, and secondary sources are 1.0 × 10−4, 3.7 × 10−5, 2.7 × 10−6, 1.6 × 10−6 and 1.9 × 10−9, respectively. The soil dust is the largest contributor to HMCR, being driven by the high impact of soil dust on PM2.5 and the abundance of heavy metals in soil dust.

Perennial plant communities in the proximity of metal smelters and refineries may receive substantial inputs of base metal particulate as well as sulphate from the co-emission of sulphur dioxide. The Ni refinery at Port Colborne (Canada) operated by Inco (now Vale Canada Ltd.) emitted Ni, Co and Cu, along with sulphur dioxide, between 1918 and 1984. The objectives were to determine if vascular plant community composition, including standing litter, in twenty-one woodlots on clay or organic soil, were related to soil Ni concentration which decreased in concentration with distance from the Ni refinery. The soil Ni concentration in the clay woodlots ranged from 16 to 4130 mg Ni/kg, and in the organic woodlots, ranged from 98 to 22,700 mg Ni/kg. The concentrations of Co and Cu in the soils were also elevated, and highly correlated with soil Ni concentration. In consequence, each series of woodlots constituted a ‘fixed ratio ray’ of metal mixture exposure. For each of the woodlots, there were 16 independent measurements of ‘woodlot status’ which were correlated with elevated soil Ni concentration. Of the 32 combinations, there were eight linear correlations with soil Ni concentration, considerably more than would be expected by chance alone at a p-value of 0.05. With the exception of mean crown rating for shrubs at the clay sites, the correlations were consistent with the hypothesis that increased soil metal concentrations would be correlated with decreased diversity, plant community health or fitness, and increased accumulation of litter. Only five of the eight linear correlations were from the organic woodlots, suggesting that the observations were not confounded with soil type nor range in soil metal concentrations.

Approximately 40% of the volume of domestic sewage generated in the São Paulo State is untreated and released into water bodies, causing serious pollution problems that affect the water quality and especially the suspended sediments transported by rivers. Thus, this paper investigates the seasonal influence on the origin and fluxes of Cu, Co, Cr, Zn, Cd, Ni, Sc and particulate organic matter (POM) in sediments transported by a disturbed watershed in the São Paulo State, i.e. the Sorocaba River basin. POM was characterized using particulate organic carbon, particulate organic nitrogen, C:N ratio and δ13C and δ15N stable isotopic composition. Eight sample collections of fine suspended sediments (FSS) were carried out at the mouth of the Sorocaba River from July 2009 to May 2010. During the study period, the discharge rate followed the seasonal variation trend of the past 25 years. Zn was the most abundant trace element in the FSS, followed by Cr, Cu, Ni, Co, Sc and Cd. There was a higher concentration of trace elements during the dry season, except for Sc and Co, which did not vary seasonally. The POM showed the same trend, with higher concentrations during the dry season. The calculated enrichment factors and geoaccumulation index indicated that most of the trace elements are of geogenic origin, except for Zn, which showed significant anthropogenic contributions (55%). The elemental and isotopic analysis of C and N and C:N ratio indicated that the anthropogenic origin of POM found in the FSS is related mainly to domestic sewage (97%), while the significant correlation found between the concentrations of Zn and POM indicates that the main anthropogenic source of Zn is related to this domestic sewage. The FSS load transported during the study period was of 373,194 t y−1, of which 87% occurred during the rainy season.

Substantial epidemiological evidence has consistently reported that fine particulate matter (PM2.5) is associated with an increased risk of cardiovascular outcomes. PM2.5 is a complex mixture of extremely small particles and liquid droplets composed of multiple components, and there has been high interest in identifying the specific health-relevant physical and/or chemical toxic constituents of PM2.5. In the present study, we analyzed 8 heavy metals (Cr, Ni, Cu, Cd, Pb, Zn, Mn and Co) in the PM2.5 collected during four different seasons in Taiyuan, a typical coal-burning city in northern China. Our results indicated that total concentrations of the 8 heavy metals differed among the seasons. Zn and Pb, which are primarily derived from the anthropogenic source, coal burning, were the dominant elements, and high concentrations of these two elements were observed during the spring and winter. To clarify whether these heavy metals in the locally collected PM2.5 were associated with health effects, we conducted health risk assessments using validated methods. Interestingly, Pb was responsible for greater potential health risks to children. Because cardiovascular disease (CVD) is a main contributor to the mortality associated with PM2.5 exposure, we performed experimental assays to evaluate the myocardial toxicity. Our in vitro experiments showed that the heavy metal-containing PM2.5 induced season-dependent apoptosis in rat H9C2 cells through a reactive oxygen species (ROS)-mediated inflammatory response. Our findings suggested that heavy metals bound to PM2.5 produced by coal burning play an important role in myocardial toxicity and contribute to season-dependent health risks.

This study aims to assess the spatial patterns of selected dust-borne trace elements alongside the river Indus Pakistan, their relation with anthropogenic and natural sources, and the potential risk posed to human health. The studied elements were found in descending concentrations: Mn, Zn, Pb, Cu, Ni, Cr, Co, and Cd. The Index of Geo-accumulation indicated that pollution of trace metals were higher in lower Indus plains than on mountain areas. In general, the toxic elements Cr, Mn, Co and Ni exhibited altitudinal trends (P < 0.05). The few exceptions to this trend were the higher values for all studied elements from the northern wet mountainous zone (low lying Himalaya). Spatial PCA/FA highlighted that the sources of different trace elements were zone specific, thus pointing to both geological influences and anthropogenic activities. The Hazard Index for Co and for Mn in children exceeded the value of 1 only in the riverine delta zone and in the southern low lying zone, whereas the Hazard Index for Pb was above the bench mark for both children and adults (with few exceptions) in all regions, thus indicating potential non-carcinogenic health risks. These results will contribute towards the environmental management of trace metal(s) with potential risk for human health throughout Pakistan.

Both occupational and environmental exposure to asbestos-mineral fibres can be associated with lung diseases. The pathogenic effects are related to the dimension, biopersistence and chemical composition of the fibres. In addition to the major mineral elements, mineral fibres contain trace elements and their content may play a role in fibre toxicity. To shed light on the role of trace elements in asbestos carcinogenesis, knowledge on their concentration in asbestos-mineral fibres is mandatory. It is possible that trace elements play a synergetic factor in the pathogenesis of diseases caused by the inhalation of mineral fibres. In this paper, the concentration levels of trace elements from three chrysotile samples, four amphibole asbestos samples (UICC amosite, UICC anthophyllite, UICC crocidolite and tremolite) and fibrous erionite from Jersey, Nevada (USA) were determined using inductively coupled plasma mass spectrometry (ICP-MS). For all samples, the following trace elements were measured: Li, Be, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Rb, Sr, Y, Sb, Cs, Ba, La, Pb, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Th, U. Their distribution in the various mineral species is thoroughly discussed.The obtained results indicate that the amount of trace metals such as Mn, Cr, Co, Ni, Cu and Zn is higher in anthophyllite and chrysotile samples, whereas the amount of rare earth elements (REE) is higher in erionite and tremolite samples. The results of this work can be useful to the pathologists and biochemists who use asbestos minerals and fibrous erionite in-vitro studies as positive cyto- and geno-toxic standard references.

Technogenic magnetic particles (TMPs) are carriers of heavy metals and organic contaminants, which derived from anthropogenic activities. However, little information on the relationship between heavy metals and TMP carrier phases at the micrometer scale is available. This study determined the distribution and association of heavy metals and magnetic phases in TMPs in three contaminated soils at the micrometer scale using micro-X-ray fluorescence (μ-XRF) and micro-X-ray absorption near-edge structure (μ-XANES) spectroscopy. Multiscale correlations of heavy metals in TMPs were elucidated using wavelet transform analysis. μ-XRF mapping showed that Fe was enriched and closely correlated with Co, Cr, and Pb in TMPs from steel industrial areas. Fluorescence mapping and wavelet analysis showed that ferroalloy was a major magnetic signature and heavy metal carrier in TMPs, because most heavy metals were highly associated with ferroalloy at all size scales. Multiscale analysis revealed that heavy metals in the TMPs were from multiple sources. Iron K-edge μ-XANES spectra revealed that metallic iron, ferroalloy, and magnetite were the main iron magnetic phases in the TMPs. The relative percentage of these magnetic phases depended on their emission sources. Heatmap analysis revealed that Co, Pb, Cu, Cr, and Ni were mainly derived from ferroalloy particles, while As was derived from both ferroalloy and metallic iron phases. Our results indicated the scale-dependent correlations of magnetic phases and heavy metals in TMPs. The combination of synchrotron based X-ray microprobe techniques and multiscale analysis provides a powerful tool for identifying the magnetic phases from different sources and quantifying the association of iron phases and heavy metals at micrometer scale.

Open burning of electronic waste (e-waste) releases various metals and organohalogen compounds in the environment. Here we investigated the interplay of metals (Cu, Pb, Zn, Fe, Co, and Sr) and bromine (Br) in the formation of dioxin-related compounds (DRCs), including polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs), as well as non-regulated DRCs such as polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) and their monobrominated PCDD/Fs in soils sampled from open burning e-waste sites at Agbogbloshie in Accra, Ghana. The predominant DRCs were PBDFs, PCDFs, PCDDs, and DL-PCBs. Statistical analyzes, X-ray absorption spectroscopy, and the PCDF/PCDD ratio suggested possible formation paths of PCDD/Fs and DL-PCBs by catalytic behaviors of copper chlorides (CuCl, CuCl2, and Cu2(OH)3Cl) and thermal breakdown of polyvinyl chloride. Predominant formation of brominated furans may be derived from electron transfer from intermediates of PBDE to copper, Cu(II) → Cu(I). Lead chloride also contributed to generate DRCs and may become highly bioaccessible through the open burning of e-waste. The main zinc species (ZnCl2 and ZnS) suggested a possible relationship to generate DRCs and specific zinc source such as tire burning. Cu, Pb, Zn, and Br contained in various e-wastes, wires/cables, plastics, and tires strongly influenced generation of many DRCs.