Groundwater in several parts of the world, particularly in developing countries, has been contaminated with Arsenic (As). In search of low-cost As removal methods, the biological oxidation of As(III) and Fe(II) followed by co-precipitation requires detailed investigation for the practical implementation of this technology. The present study investigated the biological oxidation of As(III) and Fe(II) through a combination of laboratory experiments and reactive transport modeling. Batch experiments were conducted to evaluate the As(III) oxidation by Fe-oxidizing bacteria, mainly Leptothrix spp. A fixed-bed down-flow biological column containing inexpensive and readily available coconut husk support media was used to evaluate the combined removal of As(III) and Fe(II) from synthetic groundwater. Oxidation and co-precipitation processes effectively reduced the concentration of As(III) from 500 μg/L to < 10 μg/L with a hydraulic retention time of 120 min. A one-dimensional reactive transport model was developed based on the microbially mediated biochemical reactions of As(III) and Fe(II). The model successfully reproduced the observed As(III) and Fe(II) removal trends in the column experiments. The modeling results showed that the top 20 cm aerobic layer of the column played a primary role in the microbial oxidation of Fe(II) and As(III). The model calibration identified the hydraulic residence time as the most significant process parameter for the removal of Fe and As in the column. The developed model can effectively predict As concentrations in the effluent and provide design guidelines for the biological treatment of As. The model would also be useful for understanding the biogeochemical behavior of Fe and As under aerobic conditions.

The worldwide resurgence of natural dyes in all fields is due to the carcinogenic effects of effluent loads shed by synthetic industries. Coconut coir (Cocos nucifera) containing tannin as a source of natural colorants has been selected for coloration of bio-mordanted silk under the influence of ultrasonic radiations at various dyeing conditions. For extraction of tannin dye from cocos powder, different media were employed, and dyeing variables such as dyeing time, dye bath pH, dyeing bath temperature, and the effect of salts on dyeing were optimized. For achieving new shades with excellent color characteristics, bio-mordants in comparison with chemical mordants were employed. It has been found that acid-solubilized extract after ultrasonic treatment for 45 min has yielded high color strength, when coconut coir extract of 4 pH from 6g of cocos powder, containing 5g/100mL salt solution as exhaust agent, was used to dye silk at 75°C for 65 min. Among bio-mordants turmeric (K/S=13.828) and among chemical mordants iron has shown excellent results (K/S=2.0856). Physiochemical analysis of fabric before and after US treatment shows that there is no change in the chemical structure of the fabric. It is found that ultrasonic waves have excellent potential to isolate the colorant followed by dyeing and environmental friendly mordanting at optimal conditions, but also the usage of herbal-based plant anchors, i.e., bio-mordants, has made the natural dyeing process more sustainable and clean.

The scarce availability of good quality water for irrigation in semi-arid regions leads to the reuse of waters, such as reject brine. Associated with this, the use of alternatives, such as hydroponic cultivation in substrates suitable for the development of profitable crops, such as watermelon, a species considered moderately sensitive to salinity, will allow new opportunities for communities assisted by desalination plants. An experiment was conducted in a plastic greenhouse to evaluate the growth, physiological responses, yield, and fruit quality of ‘Sugar Baby’ mini-watermelon cultivated in a hydroponic system with reject brine from desalination plants and different substrates. The experimental design was randomized blocks, with treatments arranged in a 5 × 4 factorial scheme, corresponding to five mixtures of reject brine (9.50 dS m⁻¹) and tap water (0.54 dS m⁻¹) applied to mini-watermelon plants, in an open hydroponic system, with four types of substrate and four replicates, with two plants per plot. Mini-watermelon plants grown in coconut fiber substrate showed the best growth and production. On the other hand, washed sand was the substrate that most hampered the development of plants in all mixtures. The use of reject brine to prepare the nutrient solution reduced the growth and production of mini-watermelon, mainly in mixtures with salinity above 4.00 dS m⁻¹. The changes in gas exchange caused by salt stress in mini-watermelon were of stomatal nature. Mini-watermelon has high energy stability under conditions of salt stress.

Green sorption media, which includes the utilization of renewable and recycled materials, can be used as a means for nutrient and copper removal in various low-impact development facilities. In this study, a green sorption media mixture consisting of recycled tire chip, expanded clay, and coconut coir was physiochemically evaluated for copper removal potential in stormwater runoff to deepen the understanding of its application potential. Isotherm, reaction kinetics, and life expectancy tests were conducted using both the media mixture and the individual components of the green sorption media. In addition, the media mixture was analyzed to determine its life expectancy. Isotherm test results revealed that the media mixture follows the Freundlich model and that the coconut coir had the highest affinity for copper. Distinct dynamic adsorption models were explored to determine the most suitable model for implementation based on a column test data set. Five dynamic adsorption models, including the Thomas, Clark, Bohart-Adams, Wolborska, and modified dose-response models, were investigated and the media mixture data collected in the column test were fitted into these five models, leading to the selection of the best model with the highest correlation. The modified dose-response model outperformed others in terms of the overall media mixture and the coconut coir. Life expectancy estimation showed that the media mixture has a life span of 2.13 years with the chosen influent conditions and can be applicable for improving the performance of water quality management in stormwater detention and retention ponds, bioswale, and other stormwater best management practices.

In this work, we examined the effect of two different organic wastes, composted sheep manure and coir, on the sorption, persistence, and mobility of three pesticides (alachlor, chlorfenvinphos, and chlorpyrifos) included as priority substances in European Directive 2013/39/EU. With this aim, leaching studies were conducted using disturbed soil columns filled with a typical agricultural soil (hipercalcic calcisol) from a semiarid area (southeastern Spain) to determine their potential for groundwater pollution. The three compounds were found in leachates of unamended soil although in different proportions: 53% (alachlor), 9% (chlorfenvinphos), and 6% (chlorpiryfos). The addition of organic wastes significantly increased the sorption of the studied pesticides. As a consequence, the half-lives of the studied pesticides were higher in amended than in unamended soils. A marked reduction of the amount recovered in leachates was observed in the amended soils, except for chlorpiryfos, whose recoveries barely changed. According to their potential groundwater pollution calculated as the groundwater ubiquity score (GUS) index, alachlor and chlorfenvinphos show medium leachability while chlorpiryfos is unlikely to leach.

The present work reports the use of natural alkaline extract from coconut husk ash as a precipitating agent for metal oxide nanoparticles synthesis. The abundance of K₂O and K₂CO₃ in it makes the extract highly basic and could be the alternative source of basic media in the laboratory. In this study, highly photoactive zinc oxide nanoparticles have been synthesized using water extract of waste coconut husk ash in a green approach which is considered as replacement of homogeneous base like NaOH and KOH. The formation of zinc oxide nanoparticles at different pH of the solution of coconut husk ash was confirmed through powder XRD, BET, SEM–EDX, UV–Vis, FTIR, and photoluminescence spectroscopy. The photocatalytic performance of the samples was evaluated through the degradation of methylene blue (MB) and methyl orange (MO) under solar irradiation which undergo degradation around 97% and 68% within 120 min, respectively. The high photocatalytic activity and rate constant could be attributed to the large surface area due to small particle size that could provide quicker photon absorption and reduction of charge carrier recombination. This current work introduces a new method to reduce energy consumption for the synthesis of highly photoactive low-cost zinc oxide nanoparticles.

Due to India’s population expansion, water recycling is critical to reducing water scarcity. The purpose of this study is to discuss the recycling and reuse of domestic greywater. The horizontal subsurface flow constructed wetland (HSSF-CW) was employed to treat greywater, with bioenergy crops replacing decorative plants. CO 86032 and CO 15027 sugarcane varieties were employed for phytoremediation. In a laboratory-scale HSSF-CW system with dimensions of 0.92 m, 0.61 m, and 0.45 m, coarse aggregate (20 mm), brick jelly (20 mm), and red soil mixed with coir pith (1/3 of coir pith volume-based) were employed as filter materials. During a hydraulic retention time (HRT) of 2 to 48 h, the maximum removal efficiency of biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), and total nitrogen (TN) was 77.78–90%, 69.92–81.20%, 82–91.06%, and 75.83–84.02%, respectively.

This work aims to enhance the energy cost-saving potential of conventional mud-brick by including natural waste materials as insulators. The solid waste materials considered for mud bricks are rice husk, sawdust, coir pith, and fly ash. This work investigates the structural and thermoeconomic performance of four types of insulated mud bricks and three roofs of ferrocement, clay, and ceramic materials. The thermal properties of walls and roofs were measured as per ASTM D 5334 standards. The utilization of solid waste in mud bricks enhanced the structural properties and air-conditioning cost-saving potential of the mud bricks. The results also showed the mitigation of greenhouse gas emissions with the usage of insulated bricks for buildings. The rice husk mud-brick wall showed better results of higher time lag, lower decrement factor, higher air-conditioning cost-savings, acceptable payback periods, and higher annual carbon mitigation values of 11.11 h, 0.24, 1.74 $/m², 1.17 years, and 33.35 kg/kWh, respectively, among all the studied multilayer walls. Among the roofs, clay tile roof showed a lower decrement factor (0.989), higher time lag (0.73 h), higher air-conditioning cost-savings (2.58 $/m²), lower payback periods (0.61 years), and higher annual carbon mitigation (21.73 kg/kWh). The results are in designing eco-friendly and energy-efficient envelopes for buildings.

Laboratory studies were conducted to evaluate effect of soil water content, organic soil amendment, and mineral nutrient application on decomposition of three types of biodegradable containers: recycled paper, wood pulp fiber, and coconut coir over 182 days. Soil respiration was assessed through alkaline trap and titration method to determine decomposition of biodegradable containers. Percentage of carbon content remaining in the container material after 182 days was also quantified. Relative to soil water content, recycled paper containers under 40% water holding capacity (WHC) had higher carbon dioxide released than 60%WHC. Carbon analysis indicated that less carbon remained for all container types under 60% than 40%WHC. For recycled paper and coconut coir pots, treatments receiving container and soil amendment had significantly increased soil respiration. Post-experiment carbon analysis revealed less carbon remained in the recycled paper, wood pulp fiber, and coconut coir containers in the absence of organic soil amendment. For coconut coir, the interaction of container × mineral nutrients appeared to increase soil respiration with higher carbon dioxide released under biodegradable container × low mineral nutrient. This study suggests that cultural practices (i.e., irrigation and organic matter amendment) could facilitate degradation for certain biodegradable container types; however, to provide extensive cultural practice recommendations regarding biodegradable containers, more research is needed.

The potential of agricultural waste materials for the removal bisphenol A (BPA) from aqueous solution was investigated. BPA is an endocrine-disrupting compound (EDC) used mainly in the plastic manufacturing industry. It may be hazardous to humans and animals because of its estrogenic activity. Agricultural wastes are sustainable adsorbents because of their low cost and availability. Hence, this study investigated the removal of BPA from water by adsorption onto treated coir pith, coconut shell and durian peel. The adsorption of BPA from water onto adsorbent was evaluated using field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET). The effects of morphology, functional groups, and surface area on adsorption before and after pretreatment with sulfuric acid and reaction were investigated, and it was found that the treated adsorbent were able to remove BPA. Carbonyl and hydroxyl groups had appear in large number in FTIR analysis. The present study indicates that coir pith had removed 72 % of BPA with adsorption capacity of 4.308 mg/g for 24 h, followed by durian peel (70 %, 4.178 mg/g) and coconut shell (69 %, 4.159 mg/g). The results proved that these modified phyto-waste were promising materials as alternative adsorbent for the removal of BPA from aqueous solution.