Multiple types of persistent organic pollutants (POPs), such as polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and hexachlorobenzene (HCB), can be unintentionally released from combustion or thermal industrial processes, which are speculated to be the main sources of these contaminants, as they were banned on production and use since several decades ago. In this study, concentrations and sources of 40 PCBs, 39 PCNs, and HCB were analyzed in air samples collected during the period 2012–2015 at a background site in east China. ΣPCBs, ΣPCNs, and HCB were in the range of 9–341 pg/m³, 6–143 pg/m³, and 14–522 pg/m³, respectively. Seasonal characteristics with high levels in winter and low levels in summer were observed for PCNs and HCB. PCBs also exhibited slightly higher levels in winter. Source apportionment was conducted, using polycyclic aromatic hydrocarbons (PAHs) as combustion sources indicator, combined with principal component analysis (PCA) and positive matrix factorization (PMF) model. The results indicated that the legacy of past produced and used commercial PCBs was the dominant contributor (∼56%) to the selected PCBs in the atmosphere in east China. PCNs were mainly emitted from combustion sources (∼64%), whereas HCB almost entirely originated from combustion process (>90%).

Urban parks are an important part of the urban ecological environment. The environmental quality of parks is related to human health. To evaluate sources of polycyclic aromatic hydrocarbons (PAHs) in soils of urban parks and their possible health risks, soil samples from 122 parks in Beijing, China, were collected and analyzed. The total content of 16 PAHs between 0.066 and 6.867 mg/kg. Four-ring PAHs were predominant, followed by 5-ring PAHs, while the fraction of 2-ring PAHs was the lowest. The dominant PAHs sources were found to be coal combustion and oil fuels such as gasoline and diesel. A conditional inference tree (CIT) was used to identify the key influencing factors for PAHs. Traffic emissions was the most important factor, followed by coal consumption, as well as the history and location of the park. Incremental lifetime cancer risk (ILCR) for urban park soil in Beijing were low under normal conditions. The soil PAHs exposure pathway risk for both children and adults decreased in the following order: ingestion > dermal contact > inhalation. The risk from soil in parks to children’s health is slightly higher than that of adults, although the health risk due to exposure to PAHs was not extraordinary. Ecosystem risk was negligible.

The active use of solid fossil fuels (coal) in the production of heat and electricity has led to significant pollution, climate change, environmental degradation, and an increase in morbidity and mortality. Many countries (in particular, European ones, China, Japan, the USA, Canada, etc.) have launched programs for using plant and agricultural raw materials to produce heat and electricity by burning them instead of or together with traditional fuels. It is a promising solution to produce slurry fuels, based on a mixture of coal processing, oil refining and agricultural waste. This paper presents the results of experimental research into the formation and assessment of the most hazardous emissions (sulfur and nitrogen oxides) from the combustion of promising coal slurry fuels with straw, sunflower and algae additives, i.e. the most common agricultural waste. A comparative analysis has been carried out to identify the differences in the concentrations of sulfur and nitrogen oxides from the combustion of typical coal, coal processing waste, as well as fuel slurries with and without plant additives. It has been shown that the concentration of sulfur and nitrogen oxides can be reduced by 62–87% and 12–57%, respectively, when using small masses of plant additives (no more than 10 wt%) and maintaining high combustion heat of the slurry fuel. However, the use of algae and straw in the slurry composition can increase the HCl emissions, which requires extra measures to fight corrosion. A generalizing criterion of slurry fuel vs. coal efficiency has been formulated to illustrate significant benefits of adding plant solid waste to coal-water slurries containing petrochemicals. Straw and sunflower waste (10 wt%) were found to be the best additives to reduce the air pollutant emissions.

Humic-like substances (HULIS) are complex mixtures that are highly associated with brown carbon (BrC) and are important components of biomass burning (BB) emissions. In this study, we investigated the light absorption, emission factors (EFs), and amounts of HULIS emitted from the simulated burning of 27 types of regionally important rainforest biomass in Southeast Asia. We observed that HULIS had a high mass absorption efficiency at 365 nm (MAE₃₆₅), with an average value of 2.6 ± 0.83 m² g⁻¹ C. HULIS emitted from BB accounted for 65% ± 13% of the amount of water-soluble organic carbon (WSOC) and 85% ± 10% of the light absorption of WSOC at 365 nm. The EFs of HULIS from BB averaged 2.3 ± 2.1 g kg⁻¹ fuel, and the burning of the four vegetation subtypes (herbaceous plants, shrubs, evergreen trees, and deciduous trees) exhibited different characteristics. The differences in EFs among the subtypes were likely due to differences in lignin content in the vegetation, the burning conditions, or other factors. The light absorption characteristics of HULIS were strongly associated with the EFs. The annual emissions (minimum–maximum) of HULIS from BB in this region in 2016 were 200–371 Gg. Furthermore, the emissions from January to April accounted for 99% of the total annual emissions of HULIS, which is likely the result of the burning activities during this season. The most significant emission regions were Cambodia, Burma, Thailand, and Laos. This study, which evaluated emissions of HULIS by simulating open BB, contributes to a better understanding of the light-absorbing properties and regional budgets of BrC in this region.

Smoke from plastic waste incineration in an open air travels worldwide and is a major source of air pollution particulate matter (PM) that is very withstand to degradation and hazard to human health. Suspension of smoke aerosol components in water occurs during rains and fire extinguishing. Here, water-suspended plastic smoke aerosol (WPS) preparations suitable for biotesting were synthesized. It has been revealed using dynamic light scattering that WPS contained major nano-sized (∼30 nm) PM fraction, and this result was confirmed by electron microscopy. Optical absorption of WPS was in the UV region and an increase in λₑₓ led to a red-shift in fluorescence emission with a corresponding decrease in fluorescence intensity. WPS was analyzed in neurotoxicity studies in vitro using presynaptic rat cortex nerve terminals (synaptosomes). Generation of spontaneous reactive oxygen species (ROS) detected using fluorescent dye 2′,7-dichlorofluorescein in nerve terminals was decreased by WPS (10–50 μg/ml) in a dose-dependent manner. WPS also reduced the H₂O₂-evoked ROS production in synaptosomes, thereby influencing cellular oxidative processes and this effect was similar to that for carbon nanodots. WPS (0.1 mg/ml) decreased the synaptosomal membrane potential and synaptic vesicle acidification in fluorimetric experiments. WPS (1.0 mg/ml) attenuated the synaptosomal transporter-mediated uptake of excitatory and inhibitory neurotransmitters, L-[¹⁴C]glutamate and [³H]GABA, respectively. This can lead to an excessive increase in the glutamate concentration in the synaptic cleft and neurotoxicity via over activation of ionotropic glutamate receptors. Therefore, WPS was neurotoxic and provoked presynaptic malfunction through changes of oxidative activity, reduction of the membrane potential, synaptic vesicle acidification, and transporter-mediated uptake of excitatory and inhibitory neurotransmitters in nerve terminals. In summary, synthesis and emission to the environment of ultrafine PM occur during combustion of plastics, thereby polluting air and water resources, and possibly triggering development of neuropathologies.

Trace elements (TEs) in the insoluble particles of surface snow are less affected by melting processes and can be used as environmental proxies to reveal natural and anthropogenic emissions. Here the first comprehensive study of the 16 TEs (Al, As, Ba, Bi, Cr, Cu, Fe, Mn, Ni, Pb, Sn, Sr, Ti, U, V, and Zn) in insoluble particles (>0.45 μm) from surface snow samples collected at Urumqi Glacier No. 1 (UG1), Eastern Tien Shan, China, from February 2008 to January 2010 were presented. Results show that concentrations of most insoluble particulate TEs (TEs ᵢₙₛₒₗ) in the snow were higher in summer while lower in winter, due to the increasing particle inputs and melting processes. The abundances of As, Cr, Cu, Ni, Pb, and Zn in some samples were higher than those in surrounding urban soils, which might due to these TEs have further anthropogenic input beyond the already contaminated re-suspended urban soil particles and TEs were mainly enriched in particles with small grain size. Based on enrichment factor (EF) and principal component analysis (PCA), our results suggest that eight TEs (Al, Fe, Ti, Ba, Mn, Sr, U, and V) mainly came from mineral dust, while the remaining eight TEs (As, Bi, Cr, Cu, Ni, Pb, Sn, and Zn) were affected by coal combustion, mining and smelting of non-ferrous metals, traffic emissions, and the steel industry. The Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model suggests that pollutants might originate from Xinjiang province, Kazakhstan, and Kyrgyzstan. Moreover, UG1 received more significant inputs of particle-bound pollutants in summer than in winter due to the stronger convection and the prevailing valley wind that transports pollutants from the city of Urumqi.

In compliance to European Union directives to reuse urban wastes as secondary fuels, the aim of present work was to investigate and control the environmental impact from disposal of ashes generated by combustion of a bio-solid, an olive by-product and their blend. Two waste materials were admixed with the ash and their performance as potential stabilizers was assessed. Metals and ions leached through a soil were measured.The results showed that dissolution of some alkaline substances raised the pH of water effluents, decreasing the extractability of heavy metals from the ashes. In some cases Cr and As leached reached hazardous levels. Upon addition of waste materials to ash, the concentration of Cr in liquid extracts was reduced by 35–97%, while that of Cu and As by 100%. All heavy metal values measured in the leachates were decreased to values below legislation limits. The mineralogy, the chemistry and the pH of solids involved were key factors for the retention of elements.

Benzene, toluene, ethylbenzene, and xylene isomers (BTEX) are known to affect environmental air and health quality. In this study, the levels of BTEX compounds were determined in indoor air environments during the winter generated by several different heaters: diesel pot-bellied heater with chimney (DH); electric heater (EH); unfluted gas heater (GH); kerosene heater (KH); and wood pot-bellied heater with chimney (WH). The samples were collected using a diffusion passive adsorbent (activated charcoal) and then analyzed by gas chromatography-mass spectrometry (GC-MS). The results showed that the heaters differ in the quantity of BTEX released during operation. The KH was the most polluted heater based on BTEX measurement, followed by DH. The ∑BTEX for heaters were observed as follows: KH (290 μg m⁻³); DH (120 μg m⁻³); GH (84 μg m⁻³); WH (31 μg m⁻³); EH (16 μg m⁻³). Toluene was the predominant compound in all air samples. In KH and DH, the toluene to benzene ratios (T/B) were higher than 4 due to fuel evaporation, while GH had a T/B ratio of 3.9, indicating that the combustion of liquefied petroleum gas (LPG) was the main source. Moreover, a risk assessment was performed to evaluate where the cancer risks (CR) for benzene and ethylbenzene exceeded the critical values (10⁻⁶). KH was found to be the most harmful heater for residents, followed by DH and GH. For non-carcinogenic compounds, hazard quotients (HQ) were found to be less than one and thus unlikely to cause health problems.

This study was designed to investigate the seasonal characteristics and apportion the sources of organic carbon during non-haze days (<75 μg m⁻³) and haze (≥75 μg m⁻³) events at Pinggu, a rural Beijing site. Time-resolved concentrations of carbonaceous aerosols and organic molecular tracers were measured during the winter of 2016 and summer 2017, and a Chemical Mass Balance (CMB) model was applied to estimate the average source contributions. The concentration of OC in winter is comparable with previous studies, but relatively low during the summer. The CMB model apportioned seven separate primary sources, which explained on average 73.8% on haze days and 81.2% on non-haze days of the organic carbon in winter, including vegetative detritus, biomass burning, gasoline vehicles, diesel vehicles, industrial coal combustion, residential coal combustion and cooking. A slightly lower percentage of OC was apportioned in the summer campaign with 64.5% and 78.7% accounted for. The other unapportioned OC is considered to consist of secondary organic carbon (SOC). During haze episodes in winter, coal combustion and SOC were the dominant sources of organic carbon with 23.3% and 26.2%, respectively, followed by biomass burning emissions (20%), whereas in summer, industrial coal combustion and SOC were important contributors. Diurnal contribution cycles for coal combustion and biomass burning OC showed a peak at 6–9 pm, suggesting domestic heating and cooking were the main sources of organic aerosols in this rural area. Backward trajectory analysis showed that high OC concentrations were measured when the air mass was from the south, suggesting that the organic aerosols in Pinggu were affected by both local emissions and regional transport from central Beijing and Hebei province during haze episodes. The source apportionment by CMB is compared with the results of a Positive Matrix Factorization (PMF) analysis of ACSM data for non-refractory PM₁, showing generally good agreement.

In recent years, there has been a sharp increase in interest in the development of environmentally friendly technology for burning methane gas hydrate. In addition to solving energy problems, gas hydrates will help to make significant progress in solving environmental problems. The use of gas hydrate combustion technology is shown to reduce harmful emissions. In this work, experimental studies on the combustion of double hydrate powder of propane-methane have been performed at five different ways of combustion organization. Powder heating was realized using: 1) induction heating; 2) radiation and convective heating; 3) using a hot metal body; 4) combustion without forced gas flow and 5) combustion in the presence of forced and free air convection. Currently there has been neither a comprehensive study of the combustion of double gas hydrates, nor a comparison of the combustion efficiency for different methods; besides, no data on emissions have been obtained. The maximum dissociation rate is implemented with the use of induction heating. Using a gas analyzer the concentration of gases during the gas hydrate combustion has been measured. Comparison of different ways of combustion allows optimizing the combustion efficiency of gas hydrates.