Increasing rates of commercialization and industrialization have led to the comprehensive evaluation of toxic effects of microplastics on crop plants. However, research on the impact of functionalized polystyrene nanoplastics on the toxicity of heavy metals remains limited. This study investigated the effects of polystyrene, carboxy-modified polystyrene, and amino-modified polystyrene on lead (Pb) toxicity in dandelion seedlings. The results showed that carboxy -modified polystyrene with a negative charge absorbed more Pb²⁺ than polystyrene and amino-modified polystyrene, and their maximum adsorption amounts were 5.328, 0.247, and 0.153 μg g⁻¹, respectively. The hydroponic experiment demonstrated that single amino-modified polystyrene was more toxic to dandelion seedlings than polystyrene and carboxy-modified polystyrene. The presence of Pb²⁺ was found to increase antioxidant enzymes (superoxide dismutase and catalase) and non-antioxidant enzymes (glutathione and ascorbic acid) activities in response to excessive reactive oxygen species in dandelion leaves and roots treated with polystyrene and carboxy-modified polystyrene, while it did not change much when amino-modified polystyrene was added. Interestingly, compared with single Pb²⁺, the addition of amino-modified polystyrene with positive charges induced an obvious decrease in the above parameters; however, they declined slightly in the treatments with polystyrene and carboxy-modified polystyrene despite a stronger adsorption capacity for Pb²⁺. Similarly, the bioactive compounds, including flavonoids, polyphenols, and polysaccharides in dandelion, showed a scavenging effect on O₂⁻ and H₂O₂, thereby inhibiting the accumulation and reducing medicinal properties. This study found that the effects of microplastics on the uptake, distribution, and toxicity of heavy metals depended on the nanoparticle surface charge.

Antibiotic proliferation in the environment and their persistent nature is an issue of global concern as they induce antibiotic resistance threatening both human health and the ecosystem. Antibiotics have therefore been categorized as emerging pollutants. Fluoroquinolone (FQs) antibiotics are an emerging class of contaminants that are used extensively in human and veterinary medicine. The recalcitrant nature of fluoroquinolones has led to their presence in wastewater, effluents and water bodies. Even at a low concentration, FQs can stimulate antibacterial resistance. The main sources of FQ contamination include waste from pharmaceutical manufacturing industries, hospitals and households that ultimately reaches the wastewater treatment plants (WWTPs). The conventional WWTPs are unable to completely remove FQs due to their chemical stability. Therefore, the development and implementation of more efficient, economical, convenient treatment and removal technologies are needed to adequately address the issue. This review provides an overview of the technologies available for the removal of fluoroquinolone antibiotics from wastewater including adsorptive removal, advanced oxidation processes, removal using non-carbon based nanomaterials, microbial degradation and enzymatic degradation. Each treatment technology is discussed on its merits and limitations and a comparative view is presented on the choice of an advanced treatment process for future studies and implementation. A discussion on the commercialization potential and eco-friendliness of each technology is also included in the review. The importance of metabolite identification and their residual toxicity determination has been emphasized. The last section of the review provides an overview of the policy interventions and regulatory frameworks that aid in retrofitting antibiotics as a central key focus contaminant and thereby defining the discharge limits for antibiotics and establishing safe manufacturing practices.

A laboratory bioassay was conducted to investigate the ecotoxicity of a chromium-enriched superfood, Spirulina platensis, on the meiofauna collected from the Ghar El Melh lagoon, Tunisia. After 1 month of exposure, the abundances of meiobenthic taxa and the taxonomic and morpho-functional diversity of nematodes showed significant differences between the Spirulina and Spirulina + chromium groups. The nematodes were more tolerant of all types of stressors compared to harpacticoids, polychaetes, and oligochaetes, and the lowest taxonomic and morpho-functional diversity of nematodes was observed in the highest sedimentary concentration of S. platensis (50% DW). The mixed treatments may have been richer in micro-habitats and subject to low selective pressure, thereby hosting nematodes with a wide range of adaptations. The responses of the nematode species differed depending on their functional traits. Spirulina enriched with chromium induced two responses for the same feeding group: high toxicity for Daptonema fallax and low toxicity for two Theristus species (T. flevensis and T. modicus). The ecotoxicity of the Spirulina/chromium mixtures were lower than that of Spirulina alone, suggesting mutual neutralization between these two elements. The association between functional traits and taxonomic diversity showed that the effects of the mixtures were not additive and that one of the stressors camouflaged the effect of the other. Our findings should encourage the commercialization of chromium-enriched S. platensis owing to its lower ecotoxicity than Spirulina alone.

A multi-scale methodology was used to characterize the long-term behavior and chemical stability of a CeO2-based nanocomposite used as UV filter in wood stains. ATR-FTIR and 13C NMR demonstrated that the citrate coated chelates with Ce(IV) through its central carboxyl- and its α-hydroxyl- groups at the surface of the unaged nanocomposite. After 42 days under artificial daylight, the citrate completely disappeared and small amount of degradation products remained attached to the surface even after 112 days. Moreover, the release/desorption of the citrate layer led to a surface reorganization of the nano-sized CeO2 core observed by XANES (Ce L3-edge). Such a surface and structural transformation of the commercialized nanocomposite could have implications in term of fate, transport, and potential impacts towards the environment.

Phytases are a group of digestive enzymes which are commonly used as feed enzymes. These enzymes are used exogenously in the feeds of monogastric animals thereby it improves the digestibility of phosphorous and thus reduces the negative impact of inorganic P excretion on the environment. Even though these enzymes are widely distributed in many life forms, microorganisms are the most preferred and potential source of phytase. Despite the extensive availability of the phytase-producing microbial consortia, only a few microorganisms have been known to be exploited at industrial level. The high costs of the enzyme along with the incapability to survive high temperatures followed by the poor storage stability are noted to be the bottleneck in the commercialization of enzymes. For this reason, besides the conventional fermentation approaches, the applicability of cloning, expression studies and genetic engineering has been implemented for the past few years to accomplish the abovesaid benefits. The site-directed mutagenesis as well as knocking out have also validated their prominent role in microbe-based phytase production with enhanced levels. The present review provides detailed information on recent insights on the modification of phytases through heterologous expression and protein engineering to make thermostable and protease-resistant phytases.

Many aspects of modern life of our civilization are associated with using electrical and electronic devices (EEE). Ever-increasing demand for high-performance EEE and accelerated technological development make the replacement of EEE become frequent. This leads to the generation of a tremendous amount of electronic waste (E-waste). Challenges of the management of E-waste have recently arisen out of a dearth of proper technologies to treat E-waste. Pyrolysis process can thermochemically treat waste materials that have a complicated nature and inhomogeneity. This article gives a systematic review as an effort to tackle the challenges in the context of achievements in pyrolysis process in E-waste management sector. Pyrolysis mechanism and types of pyrolysis processes and pyrolysis reactors are first discussed. Various pyrolysis technologies applied to the E-waste treatment are then summarized and compared to each other. Points to be considered for further research and pending challenges of E-waste pyrolysis are also discussed. The pyrolysis treatment of E-waste is not yet fully industrialized mostly because of high costs. However, there should be much room for further developing the E-waste pyrolysis; hence, its industrialization and commercialization is just a matter of time.

PURPOSE OF REVIEW : Improper discharge of industrial effluents would lead to direct contamination of our water, air, and soil systems. Without proper treatment, both these inorganic and organic-matter-containing waste would pose harmful effects towards aquatic organisms, overall water quality, reduction in soil health, and increase in greenhouse gasses from anaerobic microbial degradation activities. RECENT FINDINGS : Current treatment technologies involve the use of combined chemical, biological, and physical approaches, which has been proven very effective. Another useful alternative is to utilize the high organic content present in the waste as substrate for the metabolism of microbes as catalyst in industrial processes including water treatment as well as production of useful microbial secondary metabolites such as pigments. This review highlights some example for the microbial biotransformation and biomineralization of organic-rich industrial discharges. This is important based on its potential to be applied as useful alternative techniques to dispose huge volumes of industrial waste as well as reducing high cost of sustaining biological-based industrial processes that would require substantial investment notably for the microbial growth medium. Nevertheless, clear insight into the engineering aspects of such processes and sufficient knowledge on its feasibility to function properly at pilot-scale level are of paramount importance prior to any commercialization attempts.

Seawater and brackish water desalination has been a practical approach to mitigating the global fresh water scarcity. Current large-scale desalination installations worldwide can complementarily augment the global fresh water supplies, and their capacities are steadily increasing year-on-year. Despite substantial technological advance, desalination processes are deemed energy-intensive and considerable sources of CO₂ emission, leading to the urgent need for innovative low carbon desalination platforms. This paper provides a comprehensive review on innovations in membrane processes and membrane materials for low carbon desalination. In this paper, working principles, intrinsic attributes, technical challenges, and recent advances in membrane materials of the membrane-based desalination processes, exclusively including commercialised reverse osmosis (RO) and emerging forward osmosis (FO), membrane distillation (MD), electrodialysis (ED), and capacitive deionisation (CDI), are thoroughly analysed to shed light on the prospect of low carbon desalination.