As implementation of the Ballast Water Convention draws nearer a major challenge is the development of protocols which accurately assess compliance with the D-2 Standard. Many factors affect the accuracy of assessment: e.g. large volume of ballast water, the shape, size and number of ballast tanks and the heterogeneous distribution of organisms within tanks. These factors hinder efforts to obtain samples that truly represent the total ballast water onboard a vessel.A known cell density of Tetraselmis suecica was added to a storage tank and sampled at discharge. The factors holding period, initial cell density and sampling interval affected representativeness. Most samples underestimated cell density, and some tanks with an initial cell density of 100cellsml−1 showed <10cellsml−1 at discharge, i.e. met the D-2 standard. This highlights difficulties in achieving sample representativeness and when applied to a real ballast tank this will be much harder to achieve.

Nitrogen oxide (NOx) emissions from marine diesel engines pose a hazard to human health and the environment. From 2021, demanding emissions limits are expected to be applied to sea areas that the Royal Navy (RN) accesses. We analyze how these future constraints affect the choice of NOx abatement systems for RN ships, which are subject to more design constraints than civilian ships. A weighted matrix approach is used to facilitate a quantitative assessment.For most warships to be built soon after 2021 Lean Nitrogen Traps (LNT) in conjunction with Exhaust Gas Recirculation (EGR) represents a relatively achievable option with fewer drawbacks than other system types. Urea-selective catalytic reduction is likely to be most appropriate for ships that are built to civilian standards. The future technologies that are at an early stage of development are discussed.

This article presents the outcome of research aimed at assisting governments in meeting their commitments and legal obligations for sustainable fisheries, based on increasing evidence that global fisheries are in crisis. The article assesses the effectiveness of the existing legal and institutional framework for high seas living resources. It focuses on: (1) the role of regional fisheries management organizations (RFMOs); (2) tools for compliance and enforcement to stem illegal fishing; and (3) mechanisms for habitat protection. The article further highlights a variety of options for addressing key weaknesses and gaps in current ocean governance, including United Nations General Assembly (UNGA) resolutions, reforms at the regional level, as well as a possible new legal instrument, with a view to informing international discussions on ways to ensure the sustainable use of high seas resources without compromising the health of the marine environment.

Marine water quality monitoring is performed for compliance with regulatory issues, trend detection, model validation and assessment of the effectiveness of adopted policies. As the end users are managers and policy makers, the objectives should be of practical interest and the answers should reduce the uncertainty concerning environmental impact, supporting planning and decision making. Simple and clearcut answers on environmental issues require synthesis of the field information using statistics, simulation models and multiple criteria analysis (MCA). Statistics is easy to apply whereas simulation models enable researchers to forecast future trends as well as test different scenarios. MCA allows the co-estimation of socio-economic variables providing a compromise between scientists’ and policy makers’ priorities. In addition, stakeholders and the public have the right to know and participate. This article reviews marine water quality monitoring principles, design and data analysis procedures. A brief review of international conventions of regional seas is also included.

Wastewater outfalls provide a natural laboratory for the study of nutrient dynamics in coastal seas, however if properly designed and operated their impact can be difficult to detect. A model was developed and applied to investigate the effect of variation in hydrodynamic conditions on the transport and dilution of a treated wastewater plume in Belfast Lough, Northern Ireland. To validate these predictions we measured the physiochemical properties of the waters surrounding the outfall with a specific focus on inherent plume tracers likely to be relevant to the study of macroalgae (salinity, nitrogen and phosphorus). The model performed well and our data show high dilution of the plume, even under neap-tide conditions. This provides a spatially and temporally defined predictive framework for future studies investigating the compliance of Northern Ireland’s coastal waters with European Water Framework Directive objectives and for feasibility studies investigating macroalgal aquaculture near wastewater outfalls.

Two methods to measure mercury concentration in soil are compared, and their compliance with international standards is determined: cold vapour atomic absorption spectrometry and thermal decomposition, amalgamation and atomic absorption spectrophotometry. The detection limit, quantification limit and uncertainty of these two analytical methods were evaluated and compared. The results indicated that thermal decomposition, amalgamation and atomic absorption spectrophotometry had a lower quantification limit and uncertainty than cold vapour atomic absorption spectrometry (quantification limit, 0.27 vs. 0.63 mg kg⁻¹; expanded uncertainty, 9.30 % vs. 10.8 %, respectively). Thermal decomposition, amalgamation and atomic absorption spectrophotometry allowed the determination of the base values for the concentration of mercury in soil recommended by international standards, achieving a lower detection limit than cold vapour atomic absorption spectrometry under the study conditions. In addition, thermal decomposition, amalgamation and atomic absorption spectrophotometry represent a more environmentally friendly alternative for mercury determination because this method uses fewer reagents and therefore generates less waste.

The impact of the insecticide chlorpyrifos (CPF) on the mammalian digestive system has been poorly described. The present study aimed at evaluating the effect of chronic, low-dose exposure to CPF on the composition of the gut microbiota in a Simulator of the Human Intestinal Microbial Ecosystem: the SHIME® and in rats. The SHIME® comprises six reactor vessels (stomach to colon). The colonic segments were inoculated with feces from healthy humans. Then, the simulator was exposed to a daily dose of 1 mg of CPF for 30 days. The changes over time in the populations of bacteria were examined at different time points: prior to pesticide exposure (as a control) and after exposure. In parallel, pregnant rats were gavaged daily with 1 mg/kg of CPF (or vehicle) until the pups were weaned. Next, the rats were gavaged with same dose of CPF until 60 days of age (adulthood). Then, samples of different parts of the digestive tract were collected under sterile conditions for microbiological assessment. Chronic, low-dose exposure to CPF in the SHIME® and in the rat was found to induce dysbiosis in the microbial community with, in particular, proliferation of subpopulations of some strains and a decrease in the numbers of others bacteria. In compliance with European guidelines, the use of the SHIME® in vitro tool would help to (1) elucidate the final health effect of toxic agents and (2) minimize (though not fully replace) animal testing. Indeed, certain parameters would still have to be studied further in vivo.