Predicting the transfer of contaminants in soils is often hampered by lacking validation of mathematical models. Here, we applied Hydrus-2D software to three agricultural soils for simulating the 1900–2005 changes of zinc and lead concentration profiles derived from industrial atmospheric deposition, to validate the tested models with plausible assumptions on past metal inputs to reach the 2005 situation. The models were set with data from previous studies on the geochemical background, estimated temporal metal deposition, and the 2005 metal distributions. Different hypotheses of chemical reactions of metals with the soil solution were examined: 100% equilibrium or partial equilibrium, parameterized following kinetic chemical extractions. Finally, a two-site model with kinetic constant values adjusted at 1% of EDTA extraction parameters satisfactory predicted changes in metal concentration profiles for two arable soils. For a grassland soil however, this model showed limited applicability by ignoring the role of earthworm activity in metal incorporation.

International audience | Copper (Cu) concentration in agricultural soils often exceeds toxicological limits due to application of Cu-based fungicides. The potential of weeds for their use as functional cover plants in vineyard management and phytoremediation practices is little explored. We identified five weed species widely present in vineyards and assessed their Cu accumulation from eleven Mediterranean vineyards (soil Cu: 60-327 mu g g(-1)) and two adjacent control sites (soil Cu: 15-30 mu g g(-1)). Soils and plants were characterized by their physico-chemical properties and nutrient content. We applied multivariate techniques to analyze relationships between soil properties and leaf nutrient composition. Copper tolerance and accumulation traits were further tested in hydroponics using a series of CuSO4 concentrations (0.1-16 mu M).Under field conditions, the highest Cu concentration in both roots and leaves were found in Lolium perenne (221 and 461 mu g g(-1), respectively), followed by Plantago lanceolata, Rumex obtusifolius and Taraxacum officinale (>100 mu g g(-1) Cu in leaves). Only one species, Trifolium repens, did not accumulate remarkable Cu concentrations. Overall, and as revealed by the multivariate analyses, leaf Cu concentration was driven by soil Cu content, soil texture, organic matter, nitrogen, and Cu uptake into roots. However, functional regression analysis and controlled experiments suggested that Cu might be additionally absorbed from the deposits on the leaf surface related to the Cu-fungicide treatments and soil dust. Our study highlights the importance of intra-specific variability in Cu accumulation among weed species in Cu-contaminated agricultural soils. Further validation of these findings under controlled conditions could provide essential insights for optimizing management and remediation strategies.

International audience | Fine particulate matter (PM2.5) in the atmosphere is of particular concern due to its adverse effects on human health and its impact on global warming. southeast Asia is a hot spot for fossil fuel combustion with recurrent release of large plumes spreading over the ocean and neighbouring countries. Due to the complex mixture of PM2.5, the atmospheric sources contribution related to local and regional emissions in Hanoi (northern Vietnam) is still ill-constrained. Here, we present a year-round study (November 2019 to December 2020) with measurements of 18 metals and metalloids (MM) and lead isotopes in the PM2.5 fraction to quantify weather-related atmospheric inputs and to assess risk to human health. Anthropogenic inputs from fossil fuel combustion accounted for about 80% in PM2.5. We found high PM2.5-bound MM concentrations often exceeding national and global standards with a low risk of chronic inhalation and carcinogenicity, mainly attributable to Cr. During winter monsoon (northeastern winds), stable weather conditions led to the enrichment of long-range air mass transport of local particulate emissions. During the summer monsoon (southeastern winds), warm and moist winds reduced coal contribution in PM2.5. Our study highlights the need for a strict implementation of policies to control hazardous MM emissions by reducing fossil fuel combustion. On the one hand, reducing coal-related activities could reduce Cr emissions and therefore improve the risks to human health. On the other hand, public policies should encourage conversion to green transport in order to reduce petrol combustion and thus limit global warming.

International audience | Fine particulate matter (PM2.5) in the atmosphere is of particular concern due to its adverse effects on human health and its impact on global warming. southeast Asia is a hot spot for fossil fuel combustion with recurrent release of large plumes spreading over the ocean and neighbouring countries. Due to the complex mixture of PM2.5, the atmospheric sources contribution related to local and regional emissions in Hanoi (northern Vietnam) is still ill-constrained. Here, we present a year-round study (November 2019 to December 2020) with measurements of 18 metals and metalloids (MM) and lead isotopes in the PM2.5 fraction to quantify weather-related atmospheric inputs and to assess risk to human health. Anthropogenic inputs from fossil fuel combustion accounted for about 80% in PM2.5. We found high PM2.5-bound MM concentrations often exceeding national and global standards with a low risk of chronic inhalation and carcinogenicity, mainly attributable to Cr. During winter monsoon (northeastern winds), stable weather conditions led to the enrichment of long-range air mass transport of local particulate emissions. During the summer monsoon (southeastern winds), warm and moist winds reduced coal contribution in PM2.5. Our study highlights the need for a strict implementation of policies to control hazardous MM emissions by reducing fossil fuel combustion. On the one hand, reducing coal-related activities could reduce Cr emissions and therefore improve the risks to human health. On the other hand, public policies should encourage conversion to green transport in order to reduce petrol combustion and thus limit global warming.

Physicochemical and biological characterisation of different dredged sediment deposit sites in France

International audience | Biocontrol solutions (macroorganisms, microorganisms, natural substances, semiochemicals) are presented as potential alternatives to conventional plant protection products (PPPs) because they are supposed to have lower impacts on ecosystems and human health. However, to ensure the sustainability of biocontrol solutions, it is necessary to document the unintended effects of their use. Thus, the objectives of this work were to review (1) the available biocontrol solutions and their regulation, (2) the contamination of the environment (soil, water, air) by biocontrol solutions, (3) the fate of biocontrol solutions in the environment, (4) their ecotoxicological impacts on biodiversity, and (5) the impacts of biocontrol solutions compared to those of conventional PPPs. Very few studies concern the presence of biocontrol solutions in the environment, their fate, and their impacts on biodiversity. The most important number of results were found for the organisms that have been used the longest, and most often from the angle of their interactions with other biocontrol agents. However, the use of living organisms (micro and macroorganisms) in biocontrol brings a specific dimension compared to conventional PPPs because they can survive, multiply, move and colonize other environments. The questioning of regulation stems from this specific dimension of the use of living organisms. Concerning natural substances, the few existing results indicate that while most of them have low ecotoxicity, others have a toxicity equivalent to or greater than that of the conventional PPPs. There are almost no result regarding semiochemicals. Knowledge of the unintended effects of biocontrol solutions has proved to be very incomplete. Research remains necessary to ensure their sustainability.

Competing ions strongly affect heavy metal sorption onto the solid surfaces of soil. This study evaluated competitive sorption of Cd, Cu, Ni, Pb and Zn on three soils: Calcixerollic Xerochrept, Paralithic Xerorthent and Lithic Haplumbrept. Monometal and competitive sorption isotherms were obtained at 25°C. The individual effect of ions on retention of the others was ascertained by a fractional factorial analysis design. Most of the sorption isotherms belonged to type L subtype 2 in the classification of Giles. In competitive sorption the initial linear part was shorter and the knee sharper when compared with monometal sorption isotherms. Parameters related to sorptive capacity, such as Point B, Langmuir monolayer and Freundlich distribution coefficient, were higher in monometal than in competitive sorption, and in basic soils than in acidic soil. Calcium desorbed at different points of the sorption isotherms indicated that cationic exchange with Ca was the main retention mechanism in calcareous soils. For Pb, the ratio Ca desorbed/Pb sorbed was close to one; for Cu, Ni and Zn the ratio ranged from 1.20 to 1.37, probably due to partial dissolution of calcium carbonates by hydrolytic processes during retention. On the other hand, Cd had a ratio around 0.6 reflecting another additional retention mechanism, probably surface complexation. Fractional factorial design confirmed that the presence of the cations investigated reduced the amount of the five metals retained, but the presence of Cu and Pb in the system depressed Ni, Cd and Zn sorption more than the inverse. Cation mobility was enhanced when equilibrium concentration increased and the effect was higher in Ca-saturated soils.

In Kazakhstan, camel milk is mainly consumed after fermentation process. The fermented camel milk, named shubat, is generally home-made by the traditional process. The changes in mineral composition of camel milk during the fermentation process were rarely studied especially for heavy metals. The present study aimed to assess the change in heavy metals and trace-elements contents during the fermentation process. Samples of milk and shubat were collected in eight farms of Southern Kazakhstan in order to determine copper, iron, manganese, zinc, arsenic and lead. In camel milk mean content of these heavy metals was respectively of 0.065 ± 0.04, 1.478 ± 0.53, 0.084 ± 0.03, 5.163 ± 2.17, <0.1 and 0.025 ± 0.02 ppm. In shubat, the mean content was 0.163 ± 0.164, 1.57 ± 0.46, 0.088 ± 0.02, 7.217 ± 2.55, and 0.007 ppm respectively. Arsenic was detected in some samples of milk and shubat only. A relationship between heavy metals in raw milk and shubat at the farm level was observed. (Résumé d'auteur)

[Departement_IRSTEA]Eaux [TR1_IRSTEA]ARCEAU [ADD1_IRSTEA]Hydrosystèmes et risques naturels | International audience | RECOTOX is a cross-cutting initiative promoting an integrated research to respond to the challenges of monitoring, understanding, and mitigating environmental and health impacts of pesticides in agroecosystems. The added value of RECOTOX is to develop a common culture around spatial ecotoxicology including the whole chain of pressure-exposure-impact, while strengthening an integrated network of in natura specifically equipped sites. In particular, it promotes transversal approaches at relevant socioecological system scales, to capitalize knowledge, expertise, and ongoing research in ecotoxicology and, to a lesser extent, environmental toxicology. Thus, it will open existing research infrastructures in environmental sciences to research programs in ecotoxicology of pesticides.

Since its independence in 1991, Kazakhstan is in a state of "ecological crises", due to the specific place for nuclear test by soviet government for long time, and to the development of irrigation for field cottons linked with decreasing Aral Sea level. In addition the manufacturing of metals and the minerals had some impact on environmental contamination. In the South of Kazakhstan, eight farms were sampled close to probable pollution sources. Samples of camel milk, fodder and water were collected in each farm and analyzed for copper, iron, manganese, zinc, arsenic and lead. The mean content in fodder of Cu, Fe, Mn, Zn, As and Pb was 10.40 ± 2.93, 793.69 ± 630.48, 62.38 ± 20.67, 32.95 ± 27.15, 1.03 ± 0.49 and 4.28 ± 9.60 ppm respectively. In camel milk mean content of these heavy metals was respectively of 0.07 ± 0.04, 1.48 ± 0.53, 0.08 ± 0.03, 5.16 ± 2.17, <0.1, and 0.025 ± 0.02 ppm respectively. No heavy metals were detected in samples of water with the analytical methods used. The relationships between heavy metals in water, forages and milk were not clear. Some information's are lacking. We need to extend sampling at more areas where camels, cows, goat and sheep farms are closed to pollution areas, and analyzed other heavy metals suspected in pollution process.