Refine search
Results 1-6 of 6
Efficacy of Mn-doped ZnO towards Removal of Congo Red Dye under UV Exposure: Isotherm, Kinetics, Thermodynamics and Optimization Study
2023
Roy, Tapas | Mondal, Naba Kumar | Mitra, Partha
Discharge of synthetic dyes from industries without treatment leads to major environmental problems. Present research highlighted the Mn-doped ZnO along with UV-induced photo degradation of Congo red (CR) dye through batch study. The synthesized Mn-doped ZnO (MDZO) was characterized by Transmission electron microscope (TEM) and Fourier transform infrared spectroscopy (FTIR). The results revealed that MDZO along with UV exposure degraded the CR dye up to 99.3% at concentration 4 mg/L, pH (7), adsorbent dose (0.6 g/L) and contact time (30 min). The degradation data nicely fitted with pseudo-secondary kinetics and the thermodynamic study suggest the said reaction is exothermic in nature. A statistical method, central composite design (CCD) was used to screen out the optimized condition of dye degradation. The interactions of main factors and optimal conditions were also evaluated by 3D surface plots. The statistical output clearly demonstrates that the dye degradation data is nicely fitted with very high goodness of fit and F value (86.19). Present research clearly suggested that Mn-doped ZnO along with UV could be an effective treatment towards degradation of Congo red dye.
Show more [+] Less [-]Application of Ti3C2(OH)2 MXene Nanosheets as a Potential Adsorbent and Photocatalyst for Degradation of Organic Dye in Aqueous Media
2023
Hasani Khaneghahi, Batool | Dehghan Abkenar, Shiva | Gilnejad, Javad | Ganjali, Mohammad Reza | Hosseini, Morteza
In this work, single layered Ti3C2(OH)2 MXene nanosheets have been successfully prepared through a facile approach by etching Ti3AlC2 with alkaline solution treatment (KOH with minimum amounts of water). The structure and morphology of the produced nanosheets were evaluated through X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) analysis and the chemical composition was determined using an energy dispersion X-ray (EDX) spectrometer. Methylene Blue (MB) as a target pollutant adsorption and photocatalytic degradation tests were subsequently performed to assess the functionalities of hydroxyl-terminated MXene. MB removal using Ti3C2(OH)2 MXene in the dark in 20 minutes achieved an absorption-desorption balance of 51.2%, and then MB was degraded within 80 minutes under UV light irradiation with great efficiency. Our results presented that the powder of as produced exhibited good photocatalytic activity for three cycles photodegradation. The first-order rate constant (k) was calculated to be 0.0372 1/min. About 97% degradation of Methylene Blue dye in the solution was confirmed within 80 min of exposure to ultraviolet light.
Show more [+] Less [-]Analytical Methods for Extraction, Determination and Degradation of Diazinon in Soil Samples
2023
Dehghan Abkenar, Shiva | khakipour, Nazanin | Ganjali, Mohammad Reza
Diazinon is an organophosphorus insecticide that was widely used in agriculture to control pests on crops. It acts as an acetylcholinesterase inhibitor, which means that it interferes with the normal functioning of the nervous system of insects, leading to their death. Diazinon can also have an impact on human health and the environment, as it can contaminate water and soil and pose a risk to non-target species, including humans and animals. This review paper shows the progress made in the last years in analytical methods applied for the purpose of extraction, detection and degradation of Diazinon as an important environmental pollutant. A variety of sampling and analytical methods have been developed to measure diazinon and its metabolites in different media. The most popular methods for the identification and analysis of Diazinon are liquid and gas chromatography, liquid-liquid extraction, and solid-phase extraction (SPE). The focus of this review is on the identification, measurement, and elimination of diazinon as a major soil pollutant. It begins with a discussion of analytical techniques, followed by an examination of methods for removing diazinon from soil.
Show more [+] Less [-]O-Anisidine Degradation by Fenton’s Reagent and Reaction Time Estimation
2020
Chaturvedi, N. K. | Katoch, S. S.
O-Anisidines (OAs) are extensively used as an intermediate for chemical reactions to produce various triphenylmethane and azo dyes, and also in manufacturing numerous pigments. They are found to be highly toxic and have carcinogenic properties, so it is imperative to treat OA solutions before disposal. In this study a promising approach to degrade OA solutions has been carried out using Fenton’s reagent. Oxidation trials were conducted for 24 hours and various parameters – OA removal, pH, effect of H2O2 and Fe2+, and COD removal – were analysed to understand the oxidative degradation of OA. For varying initial OA concentrations, the OA and COD removal efficiencies of 72 to 85% and 62 to 74%, respectively, were obtained at pH = 3, and at different optimum H2O2 and Fe2+ doses. Lower initial concentrations of OA showed better removal efficiencies. The reaction time was estimated to 360 minutes after which there was negligible degradation occurs.
Show more [+] Less [-]Electrochemical Advanced Oxidation of Acid Red Solution Using Carbon Felt or Glassy Carbon Cathode and Pt Anode
2023
Wakrim, Asmaa | Zaroual, Zaina | El Ghachtouli, Sanae | Jamal Eddine, Jamal | Azzi, Mohammed
In order to find an effective decolorization method for dye wastewaters, the present work aims at studying the treatment efficiency of an azo dye Acid Red 14 (AR14) by Electro-Fenton process using an undivided electrochemical cell containing different electrode materials. The optimal removal efficiency was obtained using carbon felt or glassy carbon (cathode) and platinum (anode) electrodes. The method is based on the reaction of electrochemically produced hydroxyl radicals leading to oxidative degradation of the AR14. To find the best conditions for treatment of AR14 dye, the effects of Fe2+ concentration, current density, the effect of pH initial, and the nature of support electrolyte were studied. The results showed 94 % removal efficiency in 30 minutes with 120 mA/cm2 of electrolysis current, 0.2 mM of Fe2+, and pH = 3. However, the decolorization efficiency measurements confirmed that the Electro-Fenton process with the platinum anode and the carbon felt cathode was more efficient.
Show more [+] Less [-]Response surface method Optimization of the Dyes Degradation using Zero-Valent Iron based Bimetallic Nanoparticle on the Bentonite Clay Surface
2020
Sabouri, M. R. | Sohrabi, M. R. | Zeraatkar Moghaddam, A.
Immobilizing of zero-valent iron in mono- and bi-metallic systems on the bentonite clay surface as new nanocatalyst were synthesized and used to degrade model acidic dyes from aqueous media. The Fourier-transform infrared spectroscopy, scanning electron microscopy-energy dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and Brunauer-Emmett-Teller analysis were used to characterize the synthesized nanocomposites, which demonstrated successful loading of nanoscale Fe-Cu bi-metallic onto bentonite support. Different variables controlling the congo red, methyl orange and methyl red dyes degradation using zero-valent iron based bimetallic nanoparticle on the bentonite clay surface as new nanocatalyst were concurrently optimized through an experimental design. Basic evaluations proved the nanocatalyst quantity, medium pH, initial dye concentration, and contact time as the most important variables influencing the degradation phenomenon and hence a response surface methodology based on the central composite design was conducted to determine the relations between the variables and the degradation efficiencies. The statistical factors (e.g. R2 and F-value) of the derived models were considered. Using response surface plots obtained through the models, the effects of the variables on the degradation efficiencies for each dye were assessed. Also, the Nelder-Mead non-linear optimizations were performed and the optimal degradation efficiencies at a 95% confidence level were determined which were found to comply with the respective experimental response values.
Show more [+] Less [-]