In recent years, air pollution events have occurred frequently in China during the winter. Most studies have focused on the physical and chemical composition of polluted air. Some studies have examined the bacterial bioaerosols both indoors and outdoors. But few studies have focused on the relationship between air pollution and bacteria, especially pathogenic bacteria. Airborne PM samples with different diameters and different air quality index values were collected in Hangzhou, China from December 2014 to January 2015. High-throughput sequencing of 16S rRNA was used to categorize the airborne bacteria. Based on the NCBI database, the “Human Pathogen Database” was established, which is related to human health. Among all the PM samples, the diversity and concentration of total bacteria were lowest in the moderately or heavily polluted air. However, in the PM2.5 and PM10 samples, the relative abundances of pathogenic bacteria were highest in the heavily and moderately polluted air respectively. Considering the PM samples with different particle sizes, the diversities of total bacteria and the proportion of pathogenic bacteria in the PM10 samples were different from those in the PM2.5 and TSP samples. The composition of PM samples with different sizes range may be responsible for the variances. The relative humidity, carbon monoxide and ozone concentrations were the main factors, which affected the diversity of total bacteria and the proportion of pathogenic bacteria. Among the different environmental samples, the compositions of the total bacteria were very similar in all the airborne PM samples, but different from those in the water, surface soil, and ground dust samples. Which may be attributed to that the long-distance transport of the airflow may influence the composition of the airborne bacteria. This study of the pathogenic bacteria in airborne PM samples can provide a reference for environmental and public health researchers.

Chlorinated and brominated polycyclic aromatic hydrocarbons (Cl/Br-PAHs) are emerging semi-volatile organic pollutants in haze-associated particulate matter (PM). Their gas–particle phase partitioning and distribution among PM fractions have not been clarified. Clarification would increase understanding of atmospheric behavior and health risks of Cl/Br-PAHs. In this study, samples of the gas phase and 4 PM phases (aerodynamic diameters (dae) > 10 μm, 2.5–10 μm, 1.0–2.5 μm, and <1.0 μm) were collected simultaneously during haze events in Beijing and analyzed. Normalized histogram distribution indicated that the Cl/Br-PAHs tended to adhere to fine particles. Over 80% of the Cl-PAHs and 70% of the Br-PAHs were associated with fine PM (dae < 2.5 μm). The gas–particle phase partitioning and PM distribution of Cl/Br-PAHs when heating of buildings was required, which was associated with haze events, were obviously different from those when heating was not required. The relationship between the logarithmic geometric mean diameters of the Cl/Br-PAH congeners and reciprocal of the temperature (1/T) suggested that low air temperatures during the heating period could lead to high proportions of Cl/Br-PAHs in the fine particles. Increased coal burning during the heating period also contributed to high Cl/Br-PAH loads in the fine particles.

Recent studies suggest that exposure to air pollution might be associated with severity of sleep-disordered breathing (SDB). However, the association between air pollution exposure, especially particulate matter with aerodynamic diameters <= 2.5 μm (PM₂.₅), and SDB is still unclear. We collected 4312 participants' data from the Taipei Medical University Hospital's Sleep Center and air pollution data from the Taiwan Environmental Protection Administration. Associations of particulate matter with aerodynamic diameters <=10 μm (PM₁₀), PM₂.₅, nitrogen dioxide (NO₂), ozone (O₃) and sulfur dioxide (SO₂) with apnea-hypopnea index (AHI) and oxygen desaturation index (ODI) were investigated by generalized additive models. We found that an interquartile range (IQR) increase in 1-year mean PM₂.₅ (3.4 μg/m³) and NO₂ (2.7 ppb) was associated with a 4.7% and 3.6% increase in AHI, respectively. We also observed the association of an IQR increase in 1-year mean PM₂.₅ with a 2.5% increase in ODI. The similar pattern was found in the association of daily mean PM₂.₅ exposure with increased AHI. Moreover, participants showed significant AHI and ODI responses to air pollution levels in spring and winter. We concluded that exposure to PM₂.₅ was associated with SDB. Effects of air pollution on AHI and ODI were significant in spring and winter.

The aim of the study was to determine the changes in suspension particle size identified in biologically treated wastewater, which was then treated in hydroponic system with use of engineering lighting by the light-emitting diodes (LED). The study was subjected to wastewater purified under laboratory conditions, in a hydroponic system using the effect of macrophytes Pistia stratiotes and growing algae. Measurement of particle size was made using a laser granulometer. Analysis of the results showed that the additional lighting of the hydroponic system with LED can significantly influence the ability of the suspension particles to agglomerate and, consequently, determine their sedimentation properties. In hydroponic system supported by additional lighting, more particles were observed with equivalent diameter D(3.2) smaller than 10 μm than those in the tank without additional lighting, indicating a higher reactivity of the particles. Determining the size of equivalent diameters D(4.3) allowed us to observe that in hydroponic system, particles of relatively small size predominate, which negatively affects the sedimentation process of the suspensions. Determination of particle size of suspensions consisting mainly of algae and the dynamics of their changes are the basis for specification of an effective method of removing particles from the system to protect the receiver from excessive suspension concentrations.

Pipe section reactor (PSR) is a well-controlled laboratory reactor, which is used to simulate the water quality variations in drinking water distribution systems. However, the hydraulics condition within PSR, which is an essential prerequisite of the water quality studies, still remains unclear. Consequently, the objective of this study is to analyze the hydraulic conditions within PSR by means of a computational fluid dynamics (CFD) approach. The influences of configuration parameters on the hydraulic conditions were tested including propeller diameter, inclined angle of the propeller, distance between the top and inner cylinder, distance between the bottom and inner cylinder, outer cylinder length, baffle length, number of the baffles, rotational speed of the propeller, and inner and outer cylinder diameters. According to the CFD analysis, an optimal structure of PSR was suggested. The data presented here could facilitate the PSR application and improve the simulation of water quality in distribution systems.

Water contaminated with microorganisms causes numerous diseases and is a major concern for public health. In search of a simple material which can provide clean water free from pathogens, nanofibers of poly(4-chloro-3-methylphenyl methacrylate, abbreviated as CMPMA, and nano Ag-doped poly(CMPMA) composite nanofibers were used to decontaminate water from microorganisms such as Escherichia coli and Bacillus subtilis. Nanofibers were prepared by electrospinning. X-ray diffraction (XRD) and transmission electron microscopy (TEM) provide the diameters of the Ag nanoparticles which are in the range 18–21 and 13–18 nm. The diameter of the poly(CMPMA) and nano Ag-doped poly(CMPMA) composite nanofiber is seen to vary between 400 and 700 nm with the change of the processing parameters. Optimum parameters for uniform nanofibers have been obtained. The morphology of the fibers is derived from scanning electron microscopy (SEM). The superiority of the nano Ag-doped poly(CMPMA) composite nanofiber was established.

A technological system was developed for efficient nitrogen removal from real digester supernatant in a single reactor with shortened aeration to increase the economical aspects of wastewater treatment. The supernatant (600 mg TKN/L, low COD/N ratio of 2.2) was treated in batch reactors with aerobic granules (GSBRs) to test how one, two, or three non-aeration phases and acetate pulse feeding in the cycle affect the morphological and microbial properties of biomass. Introduction of one non-aeration phase in the cycle increased nitrogen removal efficiency by 11 % in comparison with constantly aerated GSBR. The additional non-aeration phases did not diminish the efficiency of ammonia oxidation but did favor nitrification to nitrate. Acetate pulse feeding in the reactor with three non-aeration phases raised the efficiency of nitrogen removal to 77 %; in parallel, the number of denitrifiers possessing nosZ genes and performing denitrification to N₂ increased. Ammonia was oxidized by aerobic and anaerobic ammonia-oxidizing bacteria and heterotrophic nitrifiers (Pseudomonas sp. and Alcaligenes faecalis) that coexisted in granules. Azoarcus sp., Rhizobium sp., and Thauera sp. were core genera of denitrifiers in granules. An increase in the number of non-aeration phases diminished EPS content in the biomass and granule diameters and increased granule density.

We conducted a 60-day roadside measurement campaign on a busy street in Münster, Germany, during summer 2016. We used gas and particle concentration measurements with high temporal resolution (10 Hz) to quantify both the emission ratios of nitrogen oxides per carbon dioxide (NO ₓ /CO₂) for over 70,000 individual exhaust plumes as well as the emission ratios for size-resolved particle numbers per carbon dioxide (d(PN CO₂ ⁻¹)/dlogD) for about 10,000 plumes. The real-world fleet passing by the measurement station consisted of passenger cars (85%), buses (5.9%), light duty commercial vehicles (5.7%), trucks (1.7%), and motorcycles (1.6%). The median measured NO ₓ /CO₂ ratio was 3.33 g kg⁻¹. The median measured PN/CO₂ emission ratio for particles with diameters between 0.03 and 10 μm was 5.6 × 10¹⁴ kg⁻¹. We compared our results with the Handbook Emission Factors for Road Transport (HBEFA) and the Euro 5 and Euro 6 emission standards by employing traffic counts, assuming the diesel-to-gasoline ratios of vehicles according to registration statistics, and estimating that stop-and-go traffic occurred 65% of the time. Using a conservative estimate, our median ratios exceeded the HBEFA data by more than 65% for NO ₓ /CO and by a factor of about 100 for PN/CO₂. Furthermore, our median NO ₓ emission per kilometer travelled (NO ₓ km⁻¹) exceeded the Euro 5 emission limit for diesel cars by a factor of 3 and exceeded the Euro 6 limit by almost a factor of 7. Additionally, our median particle number emission (PN km⁻¹) exceeded the Euro 5 and Euro 6 limits of diesel cars by a factor of almost 150. These results confirm the presumption that the emissions of a real-world traffic fleet comprehensively exceed the legal limits. Very likely, the widespread presence of defeat devices in vehicle emission control systems plays a major role in this discrepancy. This has a strong impact on the apparent inability of authorities to comply with the legal limits of the NO₂ concentrations in urban air.

The objectives of this study were (I) to establish allometric relationships between the stem volume and biomass of the stem, branches, leaves and the leaf area, and crown dimensions of individual trees, (II) to determine the relative aboveground biomass distribution, (III) to determine the vertical gradient of the specific leaf area and (IV) to estimate the aboveground stand biomass and the leaf area. Diameter at 0.3m height above ground and height of each tree were measured as the basic biometrical characteristics. The coefficient of the shape of the trunk was found by Huber's method.