Refine search
Results 1-10 of 18
Degradation of chloramphenicol by Ti/PbO2–La anodes and alteration in bacterial community and antibiotics resistance genes
2022
Dong, Hao | Fu, Yanli | Wang, Pengqi | Jiang, Wenqiang | Gao, Guangfei | Zhang, Xuan
Antibiotics accumulation in the environment has given rise to multi-drug resistant 'superbugs' and antibiotics resistence genes (ARGs). Chloramphenicol (CAP), a kind of widely used antibiotics, was chosen as the model compound to investigate its degradation during electrochemical treatment process. The prepared Ti/PbO₂–La electrodes had a denser surface and a more complete PbO₂ crystal structure than Ti/PbO₂ electrode. The doping of La increased the onset potential and the overpotential, increased the current value of the oxidation peak and the reduction peak, reduced the impedance, and increased the lifetime. The reactions CAP degradation and TOC removal on Ti/PbO₂–La electrode was both primary kinetic reactions. CAP degradation rate increased with current density, and TOC obtained the highest removal at current density of 25 mA cm⁻². The electrolyte concentration had a small effect in the range of 0.050–0.150 mol L⁻¹. The effects under acidic and neutral conditions were better than under alkaline conditions. CAP was mainly directly oxidized at the electrode surface and indirect oxidation also took place via generated ·OH and SO₄·⁻. 15 intermediates and 2 degradation pathways have been postulated. The entry of CAP and CAP intermediates into the environment caused the alteration in bacterial community and ARGs, while complete degradation products had little effect on them. Redundancy analysis showed that intI1 was the dominant factor affecting ARGs, and Actinobacteria and Patescibacteria were the main factors affecting the abundances of ARGs in the microbial community.
Show more [+] Less [-]Electrical generation and methane emission from an anoxic riverine sediment slurry treated by a two-chamber microbial fuel cell
2022
Xiao, Jiahui | Yang, Yue | Hu, Fengjie | Zhang, Taiping | Dahlgren, Randy A.
A two-chamber slurry microbial fuel cell (SMFC) was constructed using black-odorous river sediments as substrate for the anode. We tested addition of potassium ferricyanide (K₃[Fe(CN)₆]) or sodium chloride (NaCl) to the cathode chamber (0, 50, 100, 150, and 200 mM) and aeration of the cathode chamber (0, 2, 4, 6, and 8 h per day) to assess their response on electrical generation, internal resistance, and methane emission over a 600-h period. When the aeration time in the cathode chamber was 6 h and K₃[Fe(CN)₆] or NaCl concentrations were 200 mM, the highest power densities were 6.00, 6.45, and 6.64 mW·m⁻², respectively. With increasing K₃[Fe(CN)₆] or NaCl concentration in the cathode chamber, methane emission progressively decreased (mean ± SD: 181.6 ± 10.9 → 75.5 ± 9.8 mg/m³·h and 428.0 ± 28.5 → 157.0 ± 35.7 mg/m³·h), respectively, but was higher than the reference having no cathode/anode electrodes (~ 30 mg/m³·h). Cathode aeration (0 → 8 h/day) demonstrated a reduction in methane emission from the anode chamber for only the 6-h treatment (mean: 349.6 ± 37.4 versus 299.4 ± 34.7 mg/m³·h for 6 h/day treatment); methane emission from the reference was much lower (85.3 ± 26.1 mg/m³·h). Our results demonstrate that adding an electron acceptor (K₃[Fe(CN)₆]), electrolyte solution (NaCl), and aeration to the cathode chamber can appreciably improve electrical generation efficiency from the MFC. Notably, electrical generation stimulates methane emission, but methane emission decreases at higher power densities.
Show more [+] Less [-]Development of economical and highly efficient electrolyte using vanadium pentoxide for vanadium redox flow battery
2022
Beriwal, Nishant | Varmā, Anila
Vanadium pentoxide can be an inexpensive replacement to vanadium sulfate in synthesizing vanadium redox flow battery (VRFB) electrolytes. In this study, VRFB electrolyte is synthesized from vanadium pentoxide using an indigenously developed process and setup. In order to have the same performance as that of vanadium sulfate, the supporting electrolyte environment constituted by H⁺ and sulfate ion is replicated based on the calculations from standard synthesis mechanisms. The calculations reveal that 4 M H₂SO₄ is required while preparing 1.5 M Vⁿ⁺ electrolyte from V₂O₅ to replicate 1.5 M Vⁿ⁺ in 2.5 M H₂SO₄ from VOSO₄. The effect of variation of sulfuric acid concentration is explored using thermal stability testing, which shows stable V(V) electrolytes for more than 30 days for 4 M H₂SO₄ concentration. Furthermore, the electrochemical performance of developed electrolyte from vanadium pentoxide shows similar charge–discharge profile, yet 1/5 the cost as compared to vanadium sulfate.
Show more [+] Less [-]Zirconia- and ceria-based electrolytes for fuel cell applications: critical advancements toward sustainable and clean energy production
2022
Maiti, Tushar Kanti | Majhi, Jagannath | Maiti, Subrata Kumar | Singh, Jitendra | Dixit, Prakhar | Rohilla, Tushita | Ghosh, Samaresh | Bhushan, Sakchi | Chattopadhyay, Sujay
Solid oxide fuel cells (SOFCs) are emerging as energy conversion devices for large-scale electrical power generation because of their high energy conversion efficiency, excellent ability to minimize air pollution, and high fuel flexibility. In this context, this critical review has focussed on the recent advancements in developing a suitable electrolyte for SOFCs which has been required for the commercialization of SOFC technology after emphasizing the literature from the prior studies. In particular, the significant developments in the field of solid oxide electrolytes for SOFCs, particularly zirconia- and ceria-based electrolytes, have been highlighted as important advancements toward the production of sustainable and clean energy. It has been reported that among various electrolyte materials, zirconia-based electrolytes have the potential to be utilized as the electrolyte in SOFC because of their high thermal stability, non-reducing nature, and high mechanical strength, along with acceptable oxygen ion conductivity. However, some studies have proved that the zirconia-based electrolytes are not suitable for low and intermediate-temperature working conditions because of their poor ionic conductivity to below 850 °C. On the other hand, ceria-based electrolytes are being investigated at a rapid pace as electrolytes for intermediate and low-temperature SOFCs due to their higher oxygen ion conductivity with good electrode compatibility, especially at lower temperatures than stabilized zirconia. In addition, the most emerging advancements in electrolyte materials have demonstrated that the intermediate temperature SOFCs as next-generation energy conversion technology have great potential for innumerable prospective applications.
Show more [+] Less [-]Photoreduction of Cr(VI) in wastewater by anodic nanoporous Nb2O5 formed at high anodizing voltage and electrolyte temperature
2022
Alias, Nurhaswani | Hussain, Zuhailawati | Tan, Wai Kian | Kawamura, Go | Muto, Hiroyuki | Matsuda, Atsunori | Lockman, Zainovia
In this study, nanoporous anodic film was produced by anodization of niobium, Nb in a fluoride ethylene glycol electrolyte. The effect of anodization voltage and electrolyte temperature was studied to find an optimum condition for circular, ordered, and uniform pore formation. The diameter of the pores was found to be larger when the applied voltage was increased from 20 to 80 V. The as-anodized porous film was also observed to comprise of nanocrystallites which formed due to high field-induced crystallization. The nanocrystallites grew into orthorhombic Nb₂O₅ after post-annealing treatment. The Cr(VI) photoreduction property of both the as-anodized and annealed Nb₂O₅ samples obtained using an optimized condition (anodization voltage: 60 V, electrolyte temperature: 70 °C) was compared. Interestingly, the as-anodized Nb₂O₅ film was found to display better photoreduction of Cr(VI) than annealed Nb₂O₅. However, in terms of stability, the annealed Nb₂O₅ presented high photocatalytic efficiency for each cycle whereas the as-anodized Nb₂O₅ showed degradation in photocatalytic performance when used continually.
Show more [+] Less [-]Ecotoxicity of polyelectrolyte formulations in water and soil matrices
2022
Yakimenko, Olga | Ziganshina, Aliya | Terekhova, Vera | Panova, Irina | Gladkova, Marina | Timofeev, Mikhail | Yaroslavov, Alexander
Interpolyelectrolyte complexes (IPECs) formed by the interaction of two oppositely charged polyelectrolytes have been proposed as soil structure stabilizers. However, little is known about the environmental safety of IPECs. The goal of this study was to investigate the toxicity of a positively charged IPEC formed by two commercial polymers, namely the cationic biopolymer poly(diallyldimethylammonium chloride) (PDDA) and the anionic biopolymer lignohumate (LH), a humic-based plant growth promoter. Toxicity was assessed using cultures of the bacteria Escherichia coli, the ciliate Paramecium caudatum, mammalian (Bos taurus) spermatozoa in vitro, and three plant species (Sinapis alba, Raphanus sativus, and Triticum durum). The responses of test organisms were evaluated in contact with (1) polymer and water and (2) polymer and soil. In water, PDDA and IPEC were highly toxic to bacteria and ciliates at all concentrations and less toxic to mammalian cells. Higher plants were less sensitive to the polymers, and the toxicity progressively decreased in the order PDDA > IPEC > LH. In soil matrices; the phytotoxicity of PDDA and IPEC was found to be quite low, and none of the polymers was toxic to plants at concentrations that allowed the formation of polymeric soil crusts against erosion. This is because the toxicity of cationic polymers decreases as they enter the soil matrix and bind to organic matter and minerals.
Show more [+] Less [-]New biopolymer from biomass for conditioning and dehydration of sewage sludge: application on the sludge of Bouira WWTP
2022
Kebaili, Maya | Djellali, Souad | Drouiche, Nadjib | Lounici, Hakim
Sewage treatment plants in Algeria produce huge quantities of sludge expressed in tons annually. This sludge produced is unfortunately contaminated because of the use of synthetic polyelectrolytes. Recently several kinds of research have been carried out on natural flocculants for sludge conditioning, because of several advantages they present such as their renewable source and their non-toxicity. This work aims to evaluate the potential use of protonated pectin extracted from orange waste of N’GAOUS juice factory as an eco-friendly flocculant in the chemical conditioning of sludge. Protonated pectin effectiveness was compared with synthetic cationic anionic and ionic polyelectrolytes (SUPERFLOC 8396, AF400, NF102). In this context, raw sludge samples from Bouira WWTP were tested. Specific resistance to filtration (SRF), cakes dry solid content were analyzed to determine filterability, dewatering capacity of conditioned sludge, and the optimum dose of each conditioner. So that our goal was to obtain greater dryness, which is the case with the addition of protonated pectin and even the addition of Superfloc, which allowed us to obtain dryness of 33.01% and 29.19%, respectively, for the same doses that gave the lowest SRF. Based on the results found and the analysis of the specific resistance to filtration (SRF) and the dryness, and compared with the values observed for the dewatered sludge by the method used in the Bouira WWTP. Band filters (18–22%) and raw sludge (4.8–5.7%).
Show more [+] Less [-]Modification of Ti/TiO2NT with ZrO2 nanoparticles to enhance photoelectrocatalytic performance in removal of dibutyl phthalate
2022
Hyppólito, Marina Paz | Perini, João Angelo Lima | da Silva, Bianca Ferreira | Jorge, Sônia Maria Alves | Zanoni, Maria Valnice Boldrin
This work shows that ZrO₂, used as a modifier of TiO₂, can be highly effective as a co-catalyst in the photoelectrocatalytic degradation of dibutyl phthalate (DBP). The monoclinic phase of ZrO₂ was easily obtained by chemical deposition on TiO₂ nanotubes (Ebg ~3.06 eV), increasing the occurrence of hydroxyl groups and acidity on the surface of the material, as observed by electrophoretic mobility measurements. The optimized photoelectrocatalysis conditions were bias potential of 1.5 V, 0.1 M Na₂SO₄ (initial pH 6) supporting electrolyte, 6 ppm of DBP, and UV/Vis irradiation. These conditions resulted in complete removal of DBP, down to the limit of detection of the chromatographic method used, with up to complete TOC removal after 60 min of treatment. The effects of pH, bias potential, DBP concentration, and applied potential were investigated. The method was compared with photocatalysis and photolysis. An oxidation mechanism is proposed, based on intermediates detected by LC-MS/MS during 10 min of photoelectrocatalysis.
Show more [+] Less [-]Identification of micropollutants from graywater of different complexity and remediation using multilayered membranes
2022
Athullya, Manappillil K. | Dineep, Devadasan | Mathew, Mary L. | Aravindakumar, Charuvila T. | Aravind, Usha K.
Graywater reuse is one of the important concepts in attaining water sustainability. A major challenge in this area is to realize various components present in graywater. The present study involves the identification of the chemical components of graywater collected from three different environments and to investigate the efficiency of removal of some of these chemical components using ultrafiltration membranes (polyelectrolyte multilayer (PEM) membranes). The chemical components were analyzed using liquid chromatography connected with quadrupole time-of-flight (UPLC-Q-ToF-MS). A number of micropollutants including surfactants and certain contaminants of emerging concern (CECs) were identified from these samples. Out of 16 compounds identified, 13 were surfactants and the remaining were caffeine, oxybenzone, and benzophenone. These surfactants are mostly the ingredients of various detergents. Low-pressure filtration studies of the collected samples were carried out utilizing chitosan/polyacrylic acid (CHI/PAA) multilayer membranes. A 5.5 bilayer membrane showed more than 95% rejection of the identified compounds in the selected samples and significant improvement in the water quality parameters. This demonstrates that the membrane used in this work is effective in the removal of various chemicals from graywater as well as enhancing the water quality.
Show more [+] Less [-]Electrochemically activated peroxymonosulfate for the abatement of chloramphenicol in water: performance and mechanism
2022
Gao, Yu-Qiong | Zhou, Jin-Qiang | Ning, Han | Rao, Yan-Yan | Gao, Nai-Yun
In this study, electrochemically activated peroxymonosulfate (EC/PMS) with a sacrificial iron electrode was used for the removal of chloramphenicol (CAP) from water. Compared to electrolysis alone, peroxymonosulfate (PMS) alone, and Fe²⁺/PMS, EC/PMS significantly enhanced the CAP degradation. Various parameters, such as the applied current, electrolyte concentration, and PMS dose, were investigated to optimize the process. In addition, acidic conditions facilitated the CAP degradation. The presence of Cl⁻ slightly enhanced the CAP degradation, while both HCO₃⁻ and NO₃⁻ exhibited an inhibitory effect on the CAP degradation. The floccules were also analyzed after the reaction by XPS and XRD. Quenching experiments indicated that both sulfate radicals (SO₄●⁻) and hydroxyl radicals (•OH) were responsible for the CAP degradation. In addition, the degradation products were identified by LC/TOF/MS, and the degradation pathways were proposed accordingly. These results indicated that EC/PMS is a promising treatment process for the remediation of water polluted by CAP.
Show more [+] Less [-]