The aerosols generated from electronic cigarettes have a significant impact on the human respiratory system. Understanding the vaporization characteristics and aerosol optical properties of electronic cigarettes is important for assessing human exposure to aerosols. An experimental platform was designed and built to simulate the atomization process of electronic cigarette and detect the laser transmissivity of aerosols. The optical properties of single particles and polydispersed particle system for aerosols in the visible wavelength ranges of 400–780 nm were analyzed based on Mie theory. The results show that a higher heating power supplied by coil results in a larger average vaporization rate of e-liquid. Meanwhile, the steady-state transmissivity of the laser beam for aerosols reduces as the heating power increases. Under the same heating power and puffing topography, the total particulate mass (TPM) of aerosols generated by the e-liquid composed of higher vegetable glycerin (VG) content decreases. The scattering efficiency factor of aerosol particle of electronic cigarette increases with an increase in particle size. The volume scattering coefficients of a polydispersed particle system of aerosols decrease as the incident visible wavelengths increase. A higher VG content in e-liquid results in decreased TPM and particle number concentration of aerosols and increased the volume scattering coefficient in the visible wavelength range. It can explain an interesting phenomenon that a lower TPM and a better visual effect brought by the aerosols generated by the e-liquid with a higher VG content could be observed concurrently. The mass indexes (e.g., TPM, average vaporization rate, average mass concentration) and optical indexes (e.g., volume scattering coefficient, laser transmissivity) are suggested to be used for the comprehensive evaluation of relative amounts of aerosols. The results have potential significances for the objective and quantitative assessments of aerosols generated from electronic cigarettes.

A substantial increase in the usage of organophosphate esters (OPEs) as flame retardants and plasticizers in rubbers, textiles, upholstered furniture, lacquers, plastics, building materials and electronic equipment has resulted in their increasing concentrations in the environment over time. However, little is known about the concentrations and fate of OPEs and their metabolites (mOPEs) in biota, including chicken eggs. The aim of this study was to understand the spatial variation in the concentrations in chicken eggs and the partitioning between yolk and albumin. In total, 153 chicken eggs were purchased across Australia and analysed for 9 OPEs and 11 mOPE. Most of the compounds were found to be deposited in egg yolk, where diphenyl phosphate (DPHP, 3.8 ng/g wet weight, median) and tris(2-chloroisopropyl) phosphate (TCIPP, 1.8 ng/g wet weight, median) were predominant mOPE and OPE, respectively. Moreover, no spatial differences in concentrations of OPEs and mOPEs in eggs purchased from different locations were found in this study. Although comparable levels of ∑OPEs were detected in egg yolk and albumin, much higher concentrations of ∑mOPEs were found in yolk than albumin. Meanwhile, a negative correlation (R² = 0.964, p = 0.018) was found between the molecular mass of analytes and partitioning coefficient of Cyₒₗₖ/Cyₒₗₖ₊ₐₗbᵤₘᵢₙ (defined as chemical concentration in egg yolk divided by the sum of chemical concentrations in both yolk and albumin). These results indicate that n-octanol/water partition coefficients (log KOW) may not be a crucial factor in the distribution of OPEs and mOPEs between egg yolk and albumin, which is important in understanding distribution of emerging organic contaminants in biota.

Decabromodiphenyl ethane (DBDPE) is an alternative to the commercial decabromodiphenyl ether (deca-BDE) mixture but has potentially similar persistence, bioaccumulation potential and toxicity. While it is widely used as a flame retardant in electrical and electronic equipment (EEE) in China, DBDPE could be distributed globally on a large scale with the international trade of EEE emanating from China. Here, we performed a dynamic substance flow analysis to estimate the time-dependent mass flows, stocks and emissions of DBDPE in China, and the global spread of DBDPE originating in China through the international trade of EEE and e-waste. Our analysis indicates that, between 2006 and 2016, ∼230 thousand tonnes (kt) of DBDPE were produced in China; production, use and disposal activities led to the release of 196 tonnes of DBDPE to the environment. By the end of 2016, ∼152 kt of the DBDPE produced resided in in-use products across China. During the period 2000–2016, ∼39 kt of DBDPE were exported from China in EEE products, most of which (>50%) ended up in North America. Based on projected trends of China's DBDPE production, use and EEE exports, we predict that, by 2026, ∼74 and ∼14 kt of DBDPE originating in China will reside in in-use and waste stocks, respectively, in regions other than mainland China, which will act as long-term emission sources of DBDPE worldwide. This study discusses the considerable impact of DBDPE originating in China and distributed globally through the international trade of EEE; this is projected to occur on a large scale in the near future, which necessitates countermeasures.

Data from National Health and Nutrition Examination Survey for 2013–2016 were used to compare observed levels of cadmium, lead, and total mercury in blood among US residents aged ≥12 years who were users of cigars, cigarettes, cigars and cigarettes, e-cigarettes and dual users of cigarettes and e-cigarettes. Total sample size available for analysis was 1139. Adjusted geometric means (AGM) among cigarette, cigar, e-cigarette, cigarette and cigar, and cigarette-e-cigarette users were comparable for blood cadmium lead, and total mercury. Cigar only users had lower AGM than cigar and cigarette users for total mercury (0.56 vs. 0.97 μg/L, p = 0.03). There is no evidence yet that can show concentrations of blood and urine cadmium, lead, and mercury among e-cigarette users are any different than among cigarette and/or dual users of cigarettes and e-cigarettes.

Smoking activities were recognized as a main risk factor for population. Indeed, mainstream smoke aerosol is directly inhaled by smokers then delivering harmful compounds in the deepest regions of the lung. In order to reduce the potential risk of smoking, different nicotine delivery products have been recently developed. The latest device released is an electrically heated tobacco system (iQOS®, Philip Morris) which is able to warm the tobacco with no combustion. In the present paper a dimensional and volatility characterization of iQOS-generated particles was performed through particle number concentration and distribution measurements in the mainstream aerosol. The experimental analysis was carried out through a condensation particle counter, a fast mobility particle sizer and a thermo-dilution sampling system allowing aerosol samplings at different temperatures. Estimates of the particle surface area dose received by smokers were also carried out on the basis of measured data and typical smoking patterns.The particle number concentrations in the mainstream aerosols resulted lower than 1 × 108 part. cm−3 with particle number distribution modes of about 100 nm. Nonetheless, the volatility analysis showed the high amount of volatile fraction of iQOS-generated particles, indeed, samplings performed at 300 °C confirmed a significant particle shrinking phenomena (modes of about 20 nm). Anyway, the particle number concentration does not statistically decrease at higher sampling temperatures, then showing that a non-volatile fraction is always presents in the emitted particles. The dose received by smokers in terms of non-volatile amount of particle surface area was equal to 1–2 mm2 per puff, i.e. up to 4-fold larger than that received by electronic cigarette vapers.

Africa's economy is growing faster than any other continent and it has been estimated that the middle class in Africa now exceeds 350 million people. This has meant a parallel increase in the importation of consumer goods and in the implementation of communication and information technologies (ICT), but also in the generation of large quantities of e-waste. However, inadequate infrastructure development remains a major constraint to the continent's economic growth and these highly toxic residues are not always adequately managed. Few studies have been conducted to date assessing the possible association between socioeconomic development factors, including e-waste generation, and blood levels of inorganic elements in African population. To disclose the role of geographical, anthropogenic, and socioeconomic development determinants on the blood levels of Ag, Al, As, Be, Cd, Co, Cr, Hg, Ni, Pb, Sb, and V —all of them frequently found in e-waste—, an immigrant population-based study was made including a total of 245 subjects from 16 countries recently arrived to the Canary Islands (Spain). Women presented higher levels of blood elements than men, and Northern Africans (Moroccans) were the most contaminated. People from low-income countries exhibited significantly lower blood levels of inorganic elements than those from middle-income countries. We found a significant association between the use of motor vehicles and the implementation of information and communication technologies (ICT) and the level of contamination. Immigrants from the countries with a high volume of imports of second-hand electronic equipment, telephone and internet use had higher levels of inorganic elements. In general terms, the higher level of economic development the higher the blood levels of inorganic pollutants, suggesting that the economic development of Africa, in parallel to e-waste generation and the existence of informal recycling sites, have directly affected the level of contamination of the population of the continent.

With the technological advances and economic development, the multiplicity and wide variety of applications of electrical and electronic equipment have increased, as well as the amount of end-of-life products (waste of electrical and electronic equipment, WEEE). Accompanying their increasing application, there is an increasing risk to aquatic ecosystems and inhabiting organisms. Among the most common elements present in WEEE are rare earth elements (REE) such as Dysprosium (Dy). The present study evaluated the metabolic and oxidative stress responses of mussels Mytilus galloprovincialis exposed to an increasing range of Dy concentrations, after a 28 days experimental period. The results obtained highlighted that Dy was responsible for mussel’s metabolic increase associated with glycogen expenditure, activation of antioxidant and biotransformation defences and cellular damage, with a clear loss of redox balance. Such effects may greatly impact mussel’s physiological functions, including reproduction capacity and growth, with implications for population conservation. Overall the present study pointed out the need for more research on the toxic impacts resulting from these emerging pollutants, especially towards marine and estuarine invertebrate species.

Organobromine compounds comprise between 3 and 8% by weight of WEEE and mainly converted to HBr and Br₂ in the incinerator. However, these compounds, during the cooling of the flue gases, can form the PBDD/Fs in the post-combustion area of the furnace. Due to the many benefits of Oxy-combustion process, our group has developed a fluidised bed incinerator for burning the WEEE and plan to maximise HBr/Br₂ in the flue gas. Experimental results presented in the recent papers show that the combustion of the WEEE particles attains quickly to thermodynamic equilibrium. Thermodynamic modelling can, therefore, predict the concentration of brominated pollutants, particularly HBr, Br₂, HgBr₂, and Br˙ in the flue gas. In this paper, the effect of various parameters for increasing the HBr/Br₂ ratio in the flue gas has been investigated. The model shows that the addition of very small amounts of hydrogen in the post-combustion area can convert Br₂ and Br˙ into HBr.

Decabromodiphenyl ether (BDE-209) is commonly used as a flame retardant, usually in products that were utilized in electronic equipment, plastics, furniture and textiles. To identify the impacts of BDE-209 on the male reproductive system and the underlying toxicological mechanisms, 40 male ICR mice were randomly divided into four groups, which were then exposed to BDE-209 at 0, 7.5, 25 and 75 mg kg−1 d−1 for four weeks, respectively. With regard to the in vitro study, GC-2spd cells were treated with BDE-209 at 0, 2, 8 and 32 μg mL−1 for 24 h, respectively. The results from the in vivo experiments showed that BDE-209 resulted in damage to the testis structure, led to cell apoptosis in testis and decreased sperm number and motility, while sperm malformation rates were significantly increased. Moreover, BDE-209 could induce oxidative stress with decreased testosterone levels, result in DNA damage and activate DNA damage response signaling pathways (ATM/Chk2, ATR/Chk1 and DNA-PKcs/XRCC4/DNA ligase Ⅳ). The data from the in vitro experiments showed that BDE-209 led to cytotoxicity by reducing cell viability and increasing LDH release as well. BDE-209 also induced DNA strand breaks, cell cycle arrest at G1 phase and elevated reactive oxygen species (ROS) level in GC-2 cells. These results suggested that BDE-209 could lead to male reproductive toxicity by inducing DNA damage and failure of DNA damage repair which resulted in cell cycle arrest and apoptosis of spermatogenic cell. The present study provided new evidence to elucidate the potential mechanism of male reproductive toxicity induced by BDE-209.

Electronic cigarette (e-cigarette) use has steadily increased since 2010. Indoor e-cigarette use exposes bystanders to a new source of particulate matter (PM) air pollution. Elevated short-term exposures to PM with a lower measuremented aerodynamic diameter (≤2.5 μm), PM₂.₅ and ultrafine particles (UFPs) have been linked to increased risk of adverse respiratory and cardiac events. This exposure study estimated concentrations of PM₂.₅ and UFPs from indoor e-cigarette use at 0.5 meters (m) and 1 m away from an e-cigarette user and investigated whether these indoor concentrations varied across three common e-cigarette models. One e-cigarette user tested three different e-cigarettes containing the same nicotine solution on three separate occasions and measured concentrations on PM₂.₅ and UFPs at 0.5 and 1 m in a ∼38 m³ office. Continuous measures of PM₂.₅ and UFPs were taken for 5.5 min before e-cigarette use, then the user puffed seven times for 6.5 min (exposure), and for 10 min after ceasing e-cigarette use. Following the initiation of e-cigarette use, levels of PM₂.₅ increased 160-fold at a distance of 0.5 m, and 103-fold at 1 m. The corresponding increases in UFP counts were 5.2, and 3.0-fold higher, respectively. The PM₂.₅ concentrations and UFP counts between e-cigarette models were statistically significantly different at 1 m, but not at 0.5 m. There was substantial variability between distances, e-cigarettes, and replicates. This study indicates that e-cigarette vapors influence PM₂.₅ and UFPs concentrations/counts at close proximity distances indoors; additional research is needed to characterize the composition of those particles and evaluate the impacts of other e-cigarette solutions on indoor air quality.