Naphthenic acids are a group of polar organic carboxylic acids that are present in crude oil naturally. They are cycloaliphatic carboxylic acids which have 10 to 16 carbons, which gained importance since the early twentieth century because of corrosion in oil refineries. Moreover, they are the most important environmental pollutants caused by oil extraction from oil sand reserves. Heavy crude oils which have high concentration of naphthenic acids are usually considered as poor-quality oil and sold at a lower price. Often, the high concentration of naphthenic acids in crude oil reduces the life of the equipment which are used in the exploration and refining process because of corrosion. Hence, researchers are increasingly interested in the chemical properties of naphthenic acids and the acidic components of the crude oils. The most popular methods for the identification and analysis of naphthenic acids are liquid and gas chromatography (GC), liquid-liquid extraction, Fourier transform infrared spectroscopy (FTIR), and solid-phase extraction (SPE). Naphthenic acids are the most important environmental pollutants caused by oil extraction from oil sand reserves. Previous studies have revealed that naphthenic acids can be absorbed by fish, but their distribution in different tissues of fish has not been specified. Experimental samples showed the highest toxicity to fish, while there was less toxicity to invertebrates and algae. Moreover, naphthenates have various industrial utilizations; they are used in synthetic detergents, corrosion inhibitors, lubricants, fuel and oil additives, wood preservatives, insecticides, fungicides, pesticides, wetting agents, napalm thickening agents, and oil desiccants that are utilized in painting and treating wood surfaces.

The rising global demand for palm oil and its associated products has led to increased numbers of palm oil refineries with its attendant effluent discharge. Many researches have confirmed the ecological disruptive potentiality of Palm Oil Mill Effluent (POME), still further attention has to be directed at POME’s potential genotoxicity. The present study has made physico-chemical and genotoxicity assessments of POME from a corporate refinery in Nigeria, using the American Public Health Association (APHA) procedures along with Allium cepa root assay. Allium cepa roots were grown in graduated concentrations of POME and the roots were analyzed for chromosomal aberrations. Results suggest that POME caused growth inhibitions and chromosomal aberrations in A. cepa roots. with mitotic index of A. cepa roots dropping as POME concentrations were increased. The chromosomal aberrations induced in A. cepa were vagrant, sticky chromosomes, bi-nucleated cells, and C-mitosis. These results indicate that palm oil mill effluent is not only capable of causing ecological disruptions in the receiving environment, but is also potentially genotoxic to resident organisms. It is recommended that if effluents from palm oil mill refineries cannot be converted to other useful products and ought to be disposed of, it should first be properly treated and tested for genotoxicity.

Efficiency of environmental resources is one of the goals of the sustainable development of a building and its sanitation. Sanitation efficiency was sought through hybrid offsite system, which was a decentralization of sanitation services. This study proposed a hybrid onsite system combining phytoarchitecture and phytosanitation, which empowers renewable building plants to improve resource efficiency, as well as sustainable building environmental health. Based on various empirical studies on sanitation management in rural and urban areas in many places, this retrospective study identified three wastewater disposal efficiencies. It was through quantity distribution, environmental media in which the greywater could be discharged, and quality treatment. The results marked the feasibility of wastewater services for greywater treatment, which served at least 75% of the wastewater quantity. Its main contribution was related to the distribution of discharge to all environmental media, and the improvement of the quality of greywater at its disposal. Building plants could be used for hybrid onsite system, thereby making these plants multifunctional to maintain the quality of the building environment. This hybrid onsite phytosanitation system covered various feasibility features compared to other existing systems. Implementation was flexible for new provisions and adaptation to existing systems for both urban and rural areas. Thus, the service maintained sustainable buildings and environmental health.

Organophosphates are one of the most common pesticides in the world. Among them, one can find malathion that is classified as carcinogenesis, and, as a result, should be appropriately removed since it is highly consumed and possesses a lot of pathogenicity. So far, several processes have been used to remove malathion from aqueous media. The present study investigates its removal by means of Fe3O4 iron oxide nanoparticles. Based on experimental-laboratory studies, using the Response Surface Methodology (RSM), the impact of independent variables such as pH, iron oxide nanoparticle concentration, and contact time on malathion removal efficiency have been investigated. Results show that the pH of the solution is the most important and effective parameter in the process. Optimal conditions of malathion removal based on the appropriate model, obtained from RSM, include 0.4 g/L iron oxide nanoparticles, pH of about 5 (acidic conditions), and contact time of about 1 h with ultraviolet radiation being equal to 82% malathion removal. The process, used in this study, can remove malathion from aqueous solutions according to the so-called conditions, and changing the laboratory conditions can effectively remove it. This process can also be recommended as an economic and scientific method to remove malathion from drinking water.

To support the fulfillment of Sweden’s targets in term of climate change and economic growth, we need to do a distinct study to show the Environmental Kuznets Curve (EKC) pattern in different sector of the economy, as the GDP allocation, energy intensities, GHG emission, and technological development are different between sectors. This kind of study helps to figure out how the different sectors contribute to climate change and could appoint more particular and effective environment-energy policies. For this aim, we analyzed the existence of the EKC by implementing the ARDL Bound test approach in the whole and individual sectors of Sweden’s economy throughout 1990-2019. Our results indicated the contribution of a particular sector on total GHG emissions per capita. Results of the whole economy confirmed the EEKC hypothesis with a turning point in 1996, in which the AFF sector, unlike industry and service, had increased GHG emissions. Disaggregated sectoral analysis showed various results. The industry sector had efficient energy improvement. Policymakers should pay attention to AFF’s GHG emissions, as different sources of energy consumption had not impressive impact in both the short and long term. Also, effective fossil-related policies are necessary for the service sector due to the main contribution to transportation.

Acid rain still poses a global problem today, exerting many adverse effects on man, animal, and materials. As its research question, the present study tries to find out whether or not acid rains exist in Akure, Nigeria. For so doing, it determines physico-chemical properties of rain water samples, namely pH, temp, Electrical Conductivity (EC), TDS, acidity, SO4-, NO2-, Cl-, and Free CO2. According to the results, the pH ranged between 6.0 and 7.8, never falling below 5.6 which is an indication of acid rain. Also, the minimum EC was 3µS/cm and the maximum, 201µS/cm. Moreover, TDS was between 1 and 100mg/L, while Free CO2 had a mean of 23.00 and Standard Deviation of 6.16. The dominant ion was SO4- (10-11%), followed by NO3-, and Cl-. Results from the first six months (July-December 2015) reveal slight correlations in the following: TDS with pH (0.532), EC and pH (0.501), Temp and Free CO2 (0.59), whereas strong correlations have been recorded in the following parameters: Acidity with pH (0.71) and Temperature (0.69), NO2- with pH (0.96) and acidity (0.96), SO4- with temp (0.68) and NO2- (0.83), and finally Cl-  with Free CO2 (0.61), NO2- (0.73), and Cl- (0.65). It can be concluded that in the environment under this study there have been no acid rain within the period.

In the present investigation, 41 soil samples were subjected to single step chemical partitioning to assess the lithogenic and non-lithogenic portions of metals in Tehran's soils. The share of various studied metals in the anthropogenic portion ranges from as low as 0.2% to as high as 85% of bulk concentration. Geo-accumulation index (Igeo) showed that Cd falls within "heavily contaminated" soils. It might be inferred that Ni, Cu, Cr, Zn, Co and Ca fall within "Deficient to minimal" class in accordance with enrichment factor (EF) classification.. Enrichment factor values (to some extents) match with the chemical partition studies results (except for Ni and Cr). The very low Ca content of soil samples could be indicative of low biological productivity in the Tehran's soil. Also the very low concentrations of Mn could be indicative of reducing environment in soils of Tehran.

In recent years, environmental pollution by coal mining is a long-established human activity affecting all levels of life with various environmental impacts by generating heavy metals. The presence of heavy metals even in trace amount is toxic and detrimental to all living organisms. The coal mine area in Bokaro is one of the “Toxic Hotspot” in India. Bacteria have evolved uptake and efflux mechanisms to adapt in heavy metals contaminated environments and thus represent a potential source for bioremediation processes. In the present study, we isolated and characterized eight heavy metal resistant bacteria (NK-1 to 8) from soil sample in Bokaro coal mines, India. Isolates were selected based on high level of heavy metal resistance and its biochemical characterization. The following bacteria were identified based on 16S rRNA gene sequencing Enterobacter ludwigii (KM029957; NK-1), Klebsiella pneumonia (KM029958; NK-2), Enterobacter ludwigii (KM029959; NK-3), Enterobacter ludwigii (KM029960; NK-4), Klebsiella oxytoca (KM029961; NK-5), Enterobacter cloacae (KM029962; NK-6), Acinetobacter gyllenbergii (KM029963; NK-7), Enterobacter cloacae (KM029964; NK-8). A high degree of metal resistance associated with multiple antibiotic resistances was also detected in the selected isolate which was confirmed by the presence of plasmid. These isolates can further be used for bioremediation of heavy metals from contaminated site.

Water is one of the most crucial substances for life. In order to maintain their public health, each and every country has defined standards of drinking water quality, beyond which the water is considered harmful for human health. The current study compares physical, chemical, and biological standards of drinking water quality for the USA, EU, Japan, India, and Bangladesh, considering 4 physical parameters (namely, color, odor, taste, and turbidity), 35 chemical parameters (such as Calcium (Ca), Magnesium (Mg), Phosphate (PO43-), Sodium (Na), Phenolic compounds, Nitrite (NO2-), Arsenic (As), Aluminum (Al), etc.) and 2 biological parameters (i.e., Coliform (Fecal) and Coliform (Total)). The data has been collected from several secondary sources and since processes of data collection for water quality differ from one another, this aspect has been ignored. No variation has been found in biological water quality standards along with physical quality standards of the considered regions. In order to find out the differences in chemical parameters, standard ANOVA and pair-wise F-test have been conducted. There was no disparity among chemical parameters in ANOVA test. Moreover, thanks to the few excessive values of the standards (as in case of Bangladesh), the COD value is 4 mg/L, whereas in other countries this parameter is much less. However, the chemical parameters of water quality standards in Bangladesh vary significantly from other countries. Besides, there has been no variation among the standards of other countries, even though they are located in different continents. Most interestingly, despite being neighbors, Bangladesh and India differ significantly in this regard.

The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experiment is designed via RSM Method. The chrome shows a higher rejection, compared with Copper, all over the range of investigated factors. As Copper concentration grows, Cu removal efficiency drops while, the Cr (VI) removal efficiency ascends. Also by increasing chrome concentration, the Cu removal efficiency decreases, while Cr (VI) removal efficiency increases. Results show that with an increase in pH, the Cu removal drops and Cr removal is increased. The pH is the main parameter, influencing the removal rate. It has been found that the maximum removal efficiency is up to 99% and 73% for Cr (VI) and Cu, respectively. There is an adequate agreement between real data and that obtained from the models (R2 was found to be 0.9889 and 0.9664, for Cu and Cr (VI) rejection, respectively).