The installation of marine renewable energy devices (MREDs, wind turbines and converters of wave, tidal and ocean thermal energy) has increased quickly in the last decade. There is a lack of knowledge concerning the effects of MREDs on benthic invertebrates that live in contact with the seabed. The European common cuttlefish (Sepia officinalis) is the most abundant cephalopod in the Northeast Atlantic and one of the three most valuable resources for English Channel fisheries. A project to build an offshore wind farm in the French bay of Saint-Brieuc, near the English Channel, raised concern about the possible acoustic impact on local cuttlefish communities. In this study, consisting of six exposure experiments, three types of noise were considered: 3 levels of pile-driving and 3 levels of drilling. The objectives were to assess possible associated changes in hatching and larva survival, and behavioural and ultrastructural effects on sensory organs of all life stages of S. officinalis populations. After exposure, damage was observed in the statocyst sensory epithelia (hair cell extrusion) in adults compared to controls, and no anti-predator reaction was observed. The exposed larvae showed a decreased survival rate with an increasing received sound level when they were exposed to maximum pile-driving and drilling sound levels (170 dB re 1 μPa² and 167 dB re 1 μPa², respectively). However, sound pressure levels's lower than 163 dB re 1 μPa² were not found to elicit severe damage. Simulating a scenario of immobile organisms, eggs were exposed to a combination of both pile driving and drilling as they would be exposed to all operations without a chance to escape. In this scenario a decrease of hatching success was observed with increasing received sound levels.

Di(n-butyl) phthalate (DBP) is extensively used in industrial applications as plasticizer and stabilizer and its presence in the environment may present health risks for human. Previous studies have demonstrated its mutagenic, teratogenic, and carcinogenic ability. However, its effect on mammalian oocyte maturation remains unknown. In this study, we examined the effect of DBP on oocyte maturation both in vitro and in vivo. Our results showed that DBP could significantly reduce mice oocyte germinal vesicle breakdown (GVBD) and polar body extrusion (PBE) rates. In addition, oocyte cytoskeleton was damaged and cortical granule-free domains (CGFDs) were also disrupted. Finally, DBP induced early apoptosis of oocyte and granulosa cells (GCs). Collectively, these data demonstrate that DBP could reduce meiosis competence and mouse oocyte development.

Sulfadiazine (SDZ) is a typical persistent sulfonamide antibiotic, which has been widely detected in natural drinking water sources. The degradation of SDZ by UV/Oxone (potassium monopersulfate compound) was explored in this study. The results showed that Cl⁻ can effectively activate PMS to promote rapid degradation of SDZ in the Oxone process by forming chlorine in the system. Radical quenching tests suggested that radical oxidation, including HO•, SO₄•⁻, and reactive chlorine species (RCS), played an important role by UV/Oxone. It further verified that concentration and distribution of HO•, SO₄•⁻, and RCS were pH-dependent; RCS act as a major contributor at pH 6.0 and pH 7.0 to degrade SDZ in this process. The SDZ degradation rate was firstly increased and then decreased by Cl⁻ and HCO₃⁻ (0–10 mM); HA (0–10 mg L⁻¹) exhibited insignificant influence on SDZ degradation. The degradation pathways of SDZ during UV/Oxone and formation pathways of five disinfection byproducts during subsequent chlorination were proposed. The possible DBP precursors formed by SO₂ extrusion, hydroxylation, and chlorination of SDZ during UV/Oxone pre-oxidation.

A soil core collected in a tidal freshwater marsh in the Waccamaw National Wildlife Refuge (Georgetown, SC) exuded a particularly strong odor of cow manure upon extrusion. In order to test for manure and determine its provenance, we carried out microbial source tracking using DNA markers for Bacteroides, a noncoliform, anaerobic bacterial group that represents a large proportion spectrum of the fecal population. Three core sections from 0–3 cm, 9–12 cm, and 30–33 cm were analyzed for the presence of Bacteroides. The ages of core sediments were estimated using²¹⁰Pb and¹³⁷Cs dating. All three core sections tested positive for Bacteroides DNA markers related to cow or deer feces. Because cow manure is stockpiled, used as fertilizer, and a source of direct contamination in the Great Pee Dee River/Winyah Bay watershed, it is very likely the source of the Bacteroides that was deposited on the marsh. The mid-points of the core sections were dated as follows: 0–3 cm, 2009; 9–12 cm, 1999, and 30–33 cm, 1961. The presence of Bacteroides at different depths/ages in the soil profile indicates that soils in tidal freshwater marshes are, at the least, capable of being short-term sinks for Bacteroides and, may have the potential to be long-term sinks of stable, naturalized populations.

Sulfonamides (SAs) including sulfamethoxypyridazine (SMP) are regarded as a new type of persistent pollutant at present due to their abuse. In this work, the direct photodegradation behavior of 11 SAs under simulated sunlight was first investigated, and the results indicated that the direct photolysis of SMP is the slowest among these SAs. Then the oxidation degradation of SMP in UV/Co(II)/peroxymonosulfate (PMS) system was systematically explored. Up to 95.2% removal of 0.071 mM SMP was observed after 20 min of reaction under the optimal condition with a molar ratio of 1:150:5 between SMP, PMS, and Co(II). The effects of some coexisting anions on degradation of SMP were investigated. It was found that Cl⁻ and high concentrations of CO₃²⁻ and HCO₃⁻ have a significant inhibitory effect, while HPO₄²⁻ has only a slight positive effect. Radical scavenger experiments indicated that hydroxyl radicals (HO•) are prevailing active species responsible for SMP removal in UV/Co(II)/PMS system. The degradation of SMP in UV/Co(II)/PMS system was accomplished mainly by hydroxylation of the aromatic ring, extrusion of SO₂, oxidation of NH₂ group, and N − S bond cleavage. Eight intermediates for SMP degradation were identified, and their toxicities to aquatic organisms were predicted by using the ECOSAR program based on the structure − activity relationships (SARs), which suggested that the chronic toxicities of SMP and its degradation intermediates are more significant than their acute toxicities. The present research indicates that UV/Co(II)/PMS system is applicable for SMP degradation in aqueous solutions and may be helpful to understand the transformation behavior of SAs.

The cost effective maintenance of underwater pressure pipes for sewage disposal in Austria requires the detection and localization of leakages. Extrusion of wastewater in lakes can heavily influence the water and bathing quality of surrounding waters. The Distributed Temperature Sensing (DTS) technology is a widely used technique for oil and gas pipeline leakage detection. While in pipeline leakage detection, fiber optic cables are installed permanently at the outside or within the protective sheathing of the pipe; this paper aims at testing the feasibility of detecting leakages with temporary introduced fiber optic cable inside the pipe. The detection and localization were tested in a laboratory experiment. The intrusion of water from leakages into the pipe, producing a local temperature drop, served as indicator for leakages. Measurements were taken under varying measurement conditions, including the number of leakages as well as the positioning of the fiber optic cable. Experiments showed that leakages could be detected accurately with the proposed methodology, when measuring resolution, temperature gradient and measurement time were properly selected. Despite the successful application of DTS for leakage detection in this lab environment, challenges in real system applications may arise from temperature gradients within the pipe system over longer distances and the placement of the cable into the real pipe system.

Cyclodextrin nanosponges (CD-NS) are cross-linked cyclodextrin polymers characterized by a nanostructured three-dimensional network. CD-NSs in the last years found many different applications in the pharmaceutical field for the controlled release of drugs and for the absorption of undesired substances from physiological media, food, and wastewater. Most of CD-NS syntheses involve the solubilization of the chosen CD in closed batch, using a suitable organic polar aprotic liquid, which may affect potential environmental or biomedical applications. Since the research is now moving towards more sustainable approaches, new and greener syntheses of CD-NS are now being developed. Here, it is reported a new eco-friendly and efficient synthesis of nanosponges through mechanochemistry. Mechanochemistry involves the application of mechanical forces to drive and control chemical reactions by transferring energy to chemical bonds. The mechanochemical approach involves the use of a twin-screw extruder (TSE) as a chemical reactor: TSE are capable of fine temperature control and, furthermore, TS Extrusion is a continuous process and not a batch process. Among the many available CD-NS syntheses, we tested our solvent-free approach on a β-CD/citric acid (CA) system. Moreover, using TSE, the same polymer was obtained in a considerably shorter time. The so obtained NSs were used for the adsorption and removal of probe molecules, in comparison with NSs prepared by cross-linking β-CD with CA in batch.

This study aimed to evaluate the effect of using expanded vermiculite and its impact on the production of concrete roof tiles. The control treatment and replacement of 12.5, 25, 37.5, and 50% sand by vermiculite were evaluated. The concrete roof tiles were moulded by the simultaneous pressing and extrusion mechanical process. The control trace was comprised by 21.95% CPV-ARI cement, 65.85% sand, and 12.20% limestone. After production, the concrete roof tiles were cured for 28 days. The physical (roof tiles classification, samples dry weight, water absorption, and porosity), mechanical (splitting tensile strength), and microstructural properties were evaluated. All treatments were assessed before and after accelerated ageing. The thermal properties of the modification in the concrete roof tiles’ composition were also analysed. The evaluated amounts of vermiculite significantly affected the physical, mechanical, and thermal properties of concrete roof tiles. The use of vermiculite in concrete roof tiles reduced their dry weight and thermal conductivity, not impairing their durability. The use of 31.0% vermiculite in concrete roof tiles was suggested for better thermal insulation optimization (20.29% reduction) and weight reduction (7.92% and 7.94% at 28 days of curing and after accelerated ageing, respectively), along with adequate physical, mechanical, and durability properties.

Broccoli was selected as the research object in this paper to reveal the dissipation, distribution, and degradation pathway of sulfoxaflor under greenhouse and open-field cultivation conditions for the ecological risk assessment of sulfoxaflor. Results showed that the dissipation of sulfoxaflor in broccoli leaves, flowers, stems, roots, and the whole broccoli was in accordance with the first-order kinetic equation. The sulfoxaflor concentration in broccoli roots reached the maximum value after 1 day of application and then gradually decreased. The degradation half-lives of sulfoxaflor in the roots, leaves, flowers, stems, and whole broccoli were between 2.3 and 19.8 days. The longest degradation half-life of sulfoxaflor was in Heilongjiang under greenhouse cultivation. The terminal residue of sulfoxaflor in broccoli was in the range of 0.005–0.029 mg/kg, and the proportion of sulfoxaflor residue in broccoli leaves was the largest. Thirteen transformation products were separated and identified by ultrahigh-performance liquid chromatography–quadrupole time-of-flight mass spectrometry, and their kinetic evolution was studied. The cleavage of the N = S bond, C–S bond, C–O bond, and cyanide, as well as glucosylation, hydroxylation, SO extrusion, elimination, sulfhydrylation, ketonization, defluorination, and rearrangement, was inferred as the mechanism. Overall, these results can provide guidance for the supervision of the safe application of sulfoxaflor.

The development of products from wastes such as plastic and lignocellulosic materials brings great advantages from the economic and sustainable point of view. The use of waste, previously destined for disposal, enables the changes in production patterns, and prevents major environmental problems. This research investigated the inclusion of different contents of cocoa almond husk on the properties of composites with recycled low-density polyethylene (LDPE) matrix. The composites were produced by extrusion process with proportions: 0%, 10%, 20%, 30%, and 40% of cocoa waste reinforcement in the polymer matrix. The density of the composites decreased (from 0.81 to 0.61 g/cm³) with the addition of the lignocellulosic waste in the matrix. The hygroscopicity was increased, however, at considerably low levels (0.17 to 2.68 %). There was a decrease in composite strength and elongation, becoming the material more rigid. The use of the cocoa waste for composites production is feasible to use since it can be adapted to the required application and still incorporate additives requested for specific purposes. This research demonstrated that is possible the combination of recycled low-density polyethylene and lignocellulosic wastes for the production of materials with high added value.