This study investigated the control of dissolved organic matter (DOM) molecular compositions by microbial community shifts under temperature regulation (range from 5 to 35 °C), using riverine DOM and in situ microorganisms as examples. The functioning of different microbial metabolisms, including the utilization and generation processes, was comprehensively analyzed. Though the overall quantity of DOM was less temperature-affected, more molecules were identified at moderate temperatures (e.g., 15 and 25 °C) and their accumulated mass peak intensities increased with the temperature. The results were ascribed to 1) the microbial production of macromolecular (m/z > 600) CHO, CHON, and CHONS species was stimulated at higher temperatures; 2) the microorganisms consumed more DOM molecules at both higher and lower temperatures; and 3) the simultaneously decreased utilization and increased generation of recalcitrant CHO and CHON molecules with m/z < 600 at higher temperatures. The strong correlations among the temperature, community structures, and DOM chemodiversity suggested that temperature promoted the community evenness to increase the DOM generation. In addition, the higher temperature decreased the abundance of microorganisms that utilized more recalcitrant molecules and produced fewer new molecules (e.g., Proteobacteria, Acinetobacter, and Erythrobacter) while increased others that functioned the opposite (e.g., Verrucomicrobia, Bacteroidetes, and Flavobacterium) to increase the DOM production. The constructed temperature-community-DOM chemistry relationship deepened the molecular-level understanding of DOM variations and provided implications for the warming future.

Recalcitrant plastics in the environment are gradually fragmented into weathered debris distinguished from their original state by the integrative action of influencing factors, such as UV light, heating and physical abrasion. As new artificial carbon-source substrates in aquatic ecosystems, plastic products can be colonized by biofilms and even utilized by microorganisms. To investigate the influences of weathering of plastics on the colonized biofilms, freshwater samples from the Yangtze River (Nanjing, China) were collected for biofilm incubation. Based on the characterization of plastics and biofilms, the effects of plastic surface properties on biofilm characteristics were revealed by the analysis of partial least squares regression (PLSR). Roughness was the principal influencing factor, while rigidity had the opposite effect to it. 16S rRNA gene high-throughput sequencing results indicated the high relative abundance of Cyanobacteria and rising proportion of harmful components (e.g., Flavobacterium) on photoaged polyethylene plastics. The microbial functional profiles (KEGG) predicted by Tax4Fun showed that the functions (e.g., membrane transport, energy metabolism, etc.) of biofilm on photoaged plastics were dissimilar with those on original ones. These findings suggested that the distinct microbial community and the adverse functional changes in biofilms on photoaged plastics potentially enhanced their environmental risks. On the other hand, 28-day cultured biofilms on original low-density polyethylene (LDPE) films were dominated by Exiguobacterium. The previously ignored potentials of this microorganism in rapidly accommodating to a hydrophobic substrate and its plastic degrading ability were both worthy of attention. Therefore, it is necessary to consider the weathering process of plastics in exploring the “plastisphere”, and to give further insights into the double-edged nature of the “plastisphere".

The extensive use of nano-TiO₂ has caused concerns regarding their potential environmental risks. However, the stress responses and self-recovery potential of nitrogen removal and greenhouse gas N₂O emissions after long-term nano-TiO₂ exposure have seldom been addressed yet. This study explored the long-term effects of nano-TiO₂ on biological nitrogen transformations in a sequencing batch reactor at four levels (1, 10, 25, and 50 mg/L), and the reactor's self-recovery potential was assessed. The results showed that nano-TiO₂ exhibited a dose-dependent inhibitory effect on the removal efficiencies of ammonia nitrogen and total nitrogen, whereas N₂O emissions unexpectedly increased. The promoted N₂O emissions were probably due to the inhibition of denitrification processes, including the reduction of the denitrifying-related N₂O reductase activity and the abundance of the denitrifying bacteria Flavobacterium. The inhibition of carbon source metabolism, the inefficient electron transfer efficiency, and the electronic competition between the denitrifying enzymes would be in charge of the deterioration of denitrification performance. After the withdrawal of nano-TiO₂ from the influent, the nitrogen transformation efficiencies and the N₂O emissions of activated sludge recovered entirely within 30 days, possibly attributed to the insensitive bacteria survival and the microbial community diversity. Overall, this study will promote the current understanding of the stress responses and the self-recovery potential of BNR systems to nanoparticle exposure.

The presence of heavy metals in municipal solid waste (MSW) is considered as prevalent global pollutants that cause serious risks to the environment and living organisms. Due to industrial and anthropogenic activities, the accumulation of heavy metals in the environmental matrices is increasing alarmingly. MSW causes several adverse environmental impacts, including greenhouse gas (GHG) emissions, river plastic accumulation, and other environmental pollution. Indigenous microorganisms (Pseudomonas, Flavobacterium, Bacillus, Nitrosomonas, etc.) with the help of new pathways and metabolic channels can offer the potential approaches for the treatment of pollutants. Microorganisms, that exhibit the ability of bioaccumulation and sequestration of metal ions in their intracellular spaces, can be utilized further for the cellular processes like enzyme signaling, catalysis, stabilizing charges on biomolecules, etc. Microbiological techniques for the treatment and remediation of heavy metals provide a new prospects for MSW management. This review provides the key insights on profiling of heavy metals in MSW, tolerance of microorganisms, and application of indigenous microorganisms in bioremediation. The literatures revealed that indigenous microbes can be exploited as potential agents for bioremediation.

Infection caused by pathogenic bacteria carrying antibiotic resistance genes (ARGs) is a serious challenge to human health. Water environment, including water and surface sediments, is an important repository of ARGs, and the activity of aquatic animal can affect the development of ARG pollution in the water environment. Macrobenthic invertebrates are an important component of aquatic ecosystems, and their effects on ARG development in aquatic environments remain unreported. The distribution of ARGs, including tetA gene, sul2 gene, and kan gene, in Chironomidae larvae is demonstrated in this study for the first time. The ARG distribution was related to sampling points, metal elements, and seasons. Animal models demonstrated that Chironomidae larvae enriched ARGs from water and passed them on to downstream predators in the food chain. Conjugative transfer mediated by resistant plasmids was crucial in the spread of ARG in Chironomidae larvae, and upregulated expression of trfAp gene and trbBp gene was the molecular mechanism. Escherichia in Proteobacteria and Flavobacterium in Bacteroidetes, which are gram-negative bacteria in Chironomidae larvae, are the primary host bacteria of ARGs confirmed via resistance screening and DNA sequencing of V4 region of 16S rRNA gene. Feeding experiments further confirmed that ARGs from Chironomidae larvae can be enriched in the fish gut. Research gaps in food chain between sediments and fish are addressed in this study, and Chironomidae larvae is an important enricher of ARGs in the freshwater environment.

In this work, two deep subsurface wastewater infiltration systems (SWISs) were constructed and fed with domestic sewage (control system, S1) and mixed wastewater consisting of old landfill leachate and domestic sewage (experimental system, S2). S1 and S2 exhibited favorable removal efficiencies, with TP (98.8%, 98.7%), COD (87.6%, 86.9%), NH₄⁺-N (99.8%, 99.9%) and TN (99.2%, 98.9%). Even when increasing the pollutant load in S2 by adding old landfill leachate, the almost complete removal performance could be maintained in terms of low effluent concentrations and even increased in terms of load removal capabilities, which included COD (19.4, 25.9 g∙m⁻²·d⁻¹), NH₄⁺-N (8.2, 19.9 g∙m⁻²·d⁻¹), TN (8.9, 20.6 g∙m⁻²·d⁻¹). To investigate the transformation of dissolved organic matter along depth, Three-Dimensional Excitation Emission Matrix fluorescence spectroscopy combined with Fluorescence Regional Integration analysis was applied. The results showed that PⅠ,ₙ and PⅡ,ₙ (the proportions of biodegradable fractions) increased gradually from 6.59% to 21.8% at S2_20 to 10.8% and 27.7% at S2_110, but PⅢ,ₙ and PⅤ,ₙ (the proportions of refractory organics) declined from 23.1% to 27.8% at S2_20 to 21.1% and 16.4% at S2_110, respectively. In addition, high-throughput sequencing technology was employed to observe the bacterial community at different depths, and the predicted functional potential of the bacterial community was analyzed by PICRUSt. The results showed that the genera Flavobacterium, Pseudomonas, Vogesella, Acinetobacter and Aquabacterium might be responsible for refractory organic degradation and that their products might serve as the carbon source for denitrifiers to achieve simultaneous nitrate and refractory organic removal. PICRUSt further demonstrated that there was a mutual response between refractory organic degradation and denitrification. Overall, the combined treatment of domestic sewage and old leachate in rural areas by SWIS is a promising approach to achieve comprehensive treatment.

The distribution pattern of root-associated bacteria in native plant growth in tailing dumps with extreme conditions remains poorly understood and largely unexplored. Herein we chose a native plant, Bidens bipinnata, growing on both an Sb tailing dump (WKA) and adjacent normal soils (WKC) to in-depth understand the distribution pattern of root-associated bacteria and their responses on environmental factors. We found that the rhizosphere microbial diversity indices in the tailing dump were significantly different from that in the adjacent soil, and that such variation was significantly related with soil nutrients (TC, TOC, TN) and metal(loid) concentrations (Sb and As). Some dominant genera were significant enriched in WKA, suggesting their adaption to harsh environments. Notably, these genera are proposed to be involved in nutrient and metal(liod) cycling, such as nitrogen fixing (Devosia, Cellvibrio, Lysobacter, and Cohnella), P solubilizing (Flavobacterium), and Sb and As oxidation (Paenibacillus, Bacillus, Pseudomonas, and Thiobacillus). Our results suggest that certain root-associated bacteria in tailing dump were governed by soil edaphic factors and play important ecological roles in nutrient amendments and metal cycling for the successful colonization of Bidens bipinnata in this tailing dump.

The occurrence of microplastics (MPs) in the environment has been gaining widespread attention globally. MP-colonizing microorganisms are important links for MPs contamination in various ecosystems, but have not been well understood. To partially address this issue, the present study investigated biofilm formation by microorganisms originating from lake water on low-density polyethylene (LDPE) MPs using a cultivation approach and the surface-related effects on the MP-associated microbial communities using 16S rRNA high-throughput sequencing. With the addition of nonionic surfactants and UV-irradiation pretreatment that changed the surface properties of LDPE MPs, more microorganisms were colonized on LDPE surface. Microbial community analysis indicated that LDPE MPs were primarily colonized by the phyla Proteobacteria, Bacteroidetes and Firmicutes, and the surface roughness and hydrophobicity of MP were important factors shaping the LDPE MP-associated microbial community structure. Half of the top 20 most abundant genera colonizing on LDPE were found to be potential pathogens, e.g., plant pathogens Agrobacterium, nosocomial pathogens Chryseobacterium and fish pathogens Flavobacterium. This study demonstrated rapid bacterial colonization of LDPE MPs in lake water microcosms, the role of MPs as transfer vectors for harmful microorganisms in lake water, and provided a first glimpse into the effect of surface properties on LDPE MP-associated biofilm communities.

The contamination with antibiotic resistance genes (ARGs) in raw drinking water source may pose a direct threat to human health. In this study, metagenomics sequencing and analysis were applied to investigate the ARG pattern in 12 drinking water sources in upper and middle reach of Huaihe River Basin, China. Based on the redundant analysis and multi-linear regression model, location, specific microbial taxa, number of livestock and health facilities significantly influenced the ARG profile in drinking water sources. Besides the cluster effect of ARG in samples from plain and bedrock mountain areas, the samples from fracture aquifer areas also showed a distinctive biogeographic pattern with that from porous aquifer areas. Putative ARGs host Opitutus and Flavobacterium were the enriched biomarkers in plain and fracture aquifer area respectively, which mainly carried bacitracin, multidrug, beta-lactam and tetracycline ARGs. This result illuminated that both natural background and anthropogenic activities in the watershed influenced the ARG profile in natural freshwater system significantly. The low MGEs abundance and absence of pathogen revealed a low ARG dissemination risk in sampled drinking water sources, while Polynucleobacter was an abundant ARGs host and was significantly related to the ARG profile, which indicated that specific bacteria was responsible for ARGs propagation and accumulation in surface freshwater system. Further researches are needed to assess human exposure to raw drinking water source and the potential risk, as well as the species interaction in microbial community and its impact on ARG propagation under oligotrophic condition.

Selenium engineered nanomaterials (Se ENMs)-enabled agriculture has developed rapidly, however, the roles of surface charge in the bioavailability and enrichment efficiency of Se ENMs are still unknown. Herein, various Se ENMs of homogenous size (40–60 nm) and different surface charges (3.2 ± 0.7, −29.0 ± 0.4, and 45.5 ± 1.3 mV) were prepared to explore the Se content and nutritional quality in Brassica chinensis L. The results demonstrated that soil application of various Se ENMs (0.05 mg kg⁻¹) displayed different bio-availabilities via modulating the secretion of root exudates (e.g., tartaric, malic, and citric acids), microbial community composition (e.g., Flavobacterium, Pseudomonas, Paracoccus, Bacillus and Rhizobium) and root cell wall. Negatively charged Se ENMs (Se (−)) showed the highest Se content in the shoot of B. chinensis (3.7-folds). Se (−) also significantly increased yield (156.9%) and improved nutritional quality (e.g., ascorbic acid, amino acids, flavonoids, fatty acids, and tricarboxylic acid) of B. chinensis. Moreover, after harvest, the Se (−) did not lead to significant change in Se residue in soil, but the amount of Se residue in soil was increased by 5.5% after applying the traditional Se fertilizer (selenite). Therefore, this study provides useful information for producing Se-fortified agricultural products, while minimizing environmental risk.