Refine search
Results 1-4 of 4
Field comparison of disjunct and conventional eddy covariance techniques for trace gas flux measurements
2008
Rinne, J. | Douffet, T. | Prigent, Y. | Durand, P.
A field intercomparison experiment of the disjunct eddy covariance (DEC) and the conventional eddy covariance (EC) techniques was conducted over a grass field. The half-hourly water vapor fluxes measured by the DEC were within the estimated uncertainty from the fluxes measured by the EC. On the average there was a slight overestimation (<10%) of the fluxes measured by the DEC during the day and underestimation during the night as compared to the fluxes measured by the EC. As this bias does not appear in the simulated DEC measurements it is likely to be due to instrumental problems. The insensitivity of the quality of the fluxes measured by the DEC method to the deficiencies in the gas analysis shows the robustness of this new approach for measuring the surface-atmosphere exchange of trace gases. Results from the first field intercomparison between a new state-of-the-art trace gas flux measurement technique and the direct eddy covariance measurements are reported in this paper.
Show more [+] Less [-]Bulk deposition of polycyclic aromatic hydrocarbons (PAHs) in an industrial site of Turkey
2008
Esen, F. | Cindoruk, S.S. | Tasdemir, Y.
Ambient air and deposition samples were collected in the period of July 2004-May 2005 in an industrial district of Bursa, Turkey and analyzed for polycyclic aromatic hydrocarbon (PAH) compounds. The overall average of fourteen bulk deposition fluxes for PAHs was 3300 ± 5100 ng m-2 d-1. PAH depositions showed a seasonal variation and they were higher in winter months. This was probably due to increases in residential heating activities and decreases in atmospheric mixing layer levels. Ambient air samples, measured with a high volume air sampler, were collected from the same site. The average total concentration including gas and particulate phase was about 300 ± 420 ng m-3 and it was in the range of previously reported values. Some of the ambient air and bulk deposition samples were collected simultaneously in dry periods. Both concurrently measured values were used to calculate the dry deposition velocities whose overall average value was 0.45 ± 0.35 cm s-1. Bulk deposition fluxes of PAHs were measured in an industrial area and deposition velocities of PAHs were reported.
Show more [+] Less [-]Mesoporous SBA-15 Supported Iron Oxide: A Potent Catalyst for Hydrogen Sulfide Removal
2008
Wang, Xiaohui | Jia, Jinping | Zhao, Ling | Sun, Tonghua
A novel silicate mesoporous material, SBA-15 supported Fe₂O₃, was synthesized by post-synthesis method via ultrasonic-assisted route. The desulfurization test from a gas mixture containing 0.1 vol% H₂S was carried out over SBA-15 supported Fe₂O₃ in a fixed-bed system at atmospheric pressure and room temperature. The effects of the chemical nature of Fe₂O₃ and the textural properties of the material on desulfurization capacity were studied. Materials before and after the desulfurization test were characterized using nitrogen adsorption, XRD, TEM, FTIR, XPS, ICP and other standard methods. The characterization results suggest that modification process does not change the two-dimensional hexagonal mesostructure of SBA-15. Iron species disperses inside channels and the outside surface in the crystalline phase of iron oxide. The material with iron content of 31.3 wt% presented highest H₂S uptake capacity. Structural properties of the material also play important roles in desulfurization performance besides the catalytic effects of iron oxide. The basic feature of material and enough oxygen supply are benefit for the reaction. SBA-15 supported Fe₂O₃ can be an effective alternative to capture H₂S from gas streams.
Show more [+] Less [-]Gaseous and PM₁₀-Bound Pollutants Monitored in Three Sites with Differing Environmental Conditions in the Venice Area (Italy)
2008
Rampazzo, Giancarlo | Masiol, Mauro | Visin, Flavia | Pavoni, Bruno
Understanding and controlling air pollution in highly populated areas is very important, although interpreting the levels of gaseous pollutants and airborne particulate matter is complicated by dominant natural and anthropogenic emissions, micro-meteorological processes, and chemical reactions which take place directly in the atmosphere. For this reason, it is very difficult to relate the characteristics of air pollution to one or more specific emission sources. The aim of this paper is to detect associations among elements and organic compounds emitted from specific sources by means of chemical analyses, statistical processing of data, seasonal evolution study, and geochemical considerations to trace their origin. A detailed characterization of air quality during the period September 2000-September 2001 was carried out in three locations of the Venice region: A heavy traffic urban site, a public park, and the island centre of the city of Venice. Twenty-eight inorganic elements, four polycyclic aromatic hydrocarbons, CO and benzene were quantified and processed by a statistical procedure based on factor analysis considering variations on a seasonal basis. Results show the presence of associations between elements and compounds with the same behaviour in all sampling points. This indicates that several pollutants originate from a common source, and are then “diluted” throughout the study area, maintaining the imprint of their origin. Pt, polycyclic aromatic hydrocarbons, CO and benzene originating from the exhaust gas of vehicles are all linked in the traffic factor, whereas Cd is associated with Se, having a common source in industrial processes.
Show more [+] Less [-]