Refine search
Results 1-10 of 44
Effective treatment of levofloxacin wastewater by an electro-Fenton process with hydrothermal-activated graphite felt as cathode
2020
Liu, Jia-Ming | Ji, Zhi-Yong | Shi, Ya-Bin | Yuan, Peng | Guo, Xiao-Fu | Zhao, Li-Ming | Li, Shuming | Li, Hong | Yuan, Jun-Sheng
The performance of the cathode significantly affects the ability of the electro-Fenton (EF) process to degrade chemicals. In this study, a simple method to modify the graphite felt (GF) cathode was proposed, i.e. oxidizing GF by hydrothermal treatment in nitric acid. The surface physical and electrochemical properties of modified graphite felt were characterized by several techniques: scanning electron microscope (SEM), water contact angle, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and linear scanning voltammetry (LSV). Compared with an unmodified GF (GF-0), the oxygen reduction reaction (ORR) activity of a modified GF was significantly improved due to the introduction of more oxygen-containing functional groups (OGs). Furthermore, the results showed that GF was optimally modified after 9 h (GF-9) of treatment. As an example, the H₂O₂ generation by GF-9 was 2.26 times higher than that of GF-0. After optimizing the process parameters, which include the initial Fe²⁺ concentration and current density, the apparent degradation rate constant of levofloxacin (LEV) could reach as high as 0.40 min⁻¹. Moreover, the total organic carbon (TOC) removal rate and mineralization current efficiency (MCE) of the modified cathode were much higher than that of the GF-0. Conclusively, GF-9 is a promising cathode for the future development in organic pollutant removal via EF.
Show more [+] Less [-]Graphene oxide exposure suppresses nitrate uptake by roots of wheat seedlings
2020
Weng, Yineng | You, Yue | Lu, Qi | Zhong, Ao | Liu, Siyi | Liu, Huijun | Du, Shaoting
Despite the large number of studies reporting the phytotoxicity of graphene-based materials, the effects of these materials on nutrient uptake in plants remain unclear. The present study showed that nitrate concentrations were significantly decreased in the roots of wheat plants treated with graphene oxide (GO) at 200–800 mg L⁻¹. Non-invasive microelectrode measurement demonstrated that GO could significantly inhibit the net NO₃⁻ influx in the meristematic, elongation, and mature zones of wheat roots. Further analysis indicated that GO could be trapped in the root vacuoles, and that the maximal root length and the number of lateral roots were significantly reduced. Additionally, root tip whitening, creases, oxidative stress, and weakened respiration were observed. These observations indicate that GO is highly unfavorable for vigorous root growth and inhibits increase in root uptake area. At the molecular level, GO exposure caused DNA damage and inhibited the expression of most nitrate transporters (NRTs) in wheat roots, with the most significantly downregulated genes being NRT1.3, NRT1.5, NRT2.1, NRT2.3, and NRT2.4. We concluded that GO exposure decreased the root uptake area and root activity, and decreased the expression of NRTs, which may have consequently suppressed the NO₃⁻ uptake rate, leading to adverse nitrate accumulation in stressed plants.
Show more [+] Less [-]Adsorptive oxidation of sulfides catalysed by δ-MnO2 decorated porous graphitic carbon composite
2020
Edathil, Anjali Achazhiyath | Kannan, Pravin | Banat, Fawzi
Removal of dissolved sulfide contaminants from aqueous model solution using bio-derived porous graphitic carbon (PGC) impregnated with δ-MnO₂ was investigated. The composite adsorbent was synthesized using the chemical wet deposition method wherein MnO₂ was deposited on carbon walls through an in-situ reaction between permanganate and ethanol. Formation of transition metal oxide of manganese in the form of birnessite nanoparticles on interconnected PGC cell structure was confirmed by transmission electron microscopy, scanning electron microscopy, elemental analysis, and X-Ray diffraction characterization studies. The composite nanomaterial was tested for sulfide removal from aqueous solution at various conditions, including the pH, adsorbent dosage, initial solution concentration, and contact time. Adsorption results demonstrated an excellent adsorption capacity of ca. 90% within 20 min of contact time at 298 K. Equilibrium data collected from batch adsorption experiments fitted well with the Langmuir isotherm model (KL = 190 L/mg; R² = 0.99). The maximum adsorption capacity of the composite was estimated as 526.3 mg S²⁻/g at highly alkaline conditions compared to ca. 340 mg/g for a δ-MnO₂ adsorbent. Adsorptive oxidation of sulfides on composite MnO₂-PGC adsorbent was found to be controlled by the chemisorption process in accordance with the pseudo-second-order reaction model. Characterization of spent adsorbents revealed that sulfide was removed through adsorptive oxidation resulting in the formation of agglomerated particles of metal sulfate complexes and elemental sulfur. Analysis of reaction mechanism revealed that both MnO₂ and PGC played a role in the adsorptive oxidation of sulfides to CaSO₄ and elemental sulfur.
Show more [+] Less [-]Differential histological, cellular and organism-wide response of earthworms exposed to multi-layer graphenes with different morphologies and hydrophobicity
2020
Zhang, Haiyun | Vidonish, Julia | Lv, Weiguang | Wang, Xilong | Álvarez, Pedro
The growing use of graphene-based nanomaterials (GBNs) for various applications increases the probability of their environmental releases and calls for a systematic assessment of their potential impacts on soil invertebrates that serve as an important link along terrestrial food chains. Here, we investigated the response of earthworms (Eisenia fetida) to three types of multi-layer graphenes (MLGs) (G1, G2 and G3 with 12–15 layers) with variable morphology (lateral sizes: 7.4 ± 0.3, 6.4 ± 0.1 and 2.8 ± 0.1 μm; thicknesses: 5.0 ± 0.1, 4.2 ± 0.1 and 4.0 ± 0.2 nm, respectively) and hydrophobicity ((O + N)/C ratios: 0.029, 0.044 and 0.075; contact angles: 122.8, 118.8 and 115.1°, respectively). Exposure to these materials was conducted for 28 days (except for 48-h avoidance test) separately in potting or farm soil at 0.2% and 1% by weight. Earthworms avoided both soils when amended with 1% of the smaller and more hydrophilic MLGs (G2 and G3), leading to a decreased trend in worm cocoon formation. The smallest and most hydrophilic MLG (G3), which was easier to assimilate, also significantly inhibited the viability (20.2–56.0%) and mitochondrial membrane potential (32.0–48.5%) of worm coelomocytes in both soils. In contrast, oxidative damage (indicated by lipid peroxides) was more pronounced upon exposure to more hydrophobic and larger graphenic materials (G1 and G2), which were attributed to facilitated adhesion to and disruption of worm membranes. These findings highlight the importance of MLG morphology and hydrophobicity in their potential toxicity and mode of action, as well as ecological risks associated with incidental and accidental releases.
Show more [+] Less [-]Design of a Z-scheme g-C3N4/CQDs/CdIn2S4 composite for efficient visible-light-driven photocatalytic degradation of ibuprofen
2020
Liang, Mingxing | Zhang, Zhaosheng | Long, Run | Wang, Ying | Yu, Yajing | Pei, Yuansheng
A novel Z-scheme photocatalyst consisting of acidified graphitic carbon nitrogen (ag-C₃N₄)/carbon quantum dots/CdIn₂S₄ (CN/CQDs/CIS) was successfully synthesized via a one-step hydrothermal method. The optimized CN-2/CQDs-3/CIS exhibited significantly improved photocatalytic performance in the degradation of ibuprofen under visible-light irradiation. Based on a series of characterizations, the ag-C₃N₄ and CQDs were distributed uniformly on the surface of the cubic spinel structure of CIS, with intimate contact among the materials. This intimate heterogeneous interface facilitated the migration of photogenerated carriers, further leading to enhanced photocatalytic performance. These results also indicated that the CQDs not only connect ag-C₃N₄ with CIS through covalent bonds but also enhance the visible-light adsorption. According to the analysis of the UV–vis diffuse reflectance spectra (DRS) and Mott-Schottky curves, the mechanism of the Z-scheme heterojunction is proposed. The CQDs serve as electron mediators and transfer the electrons in the conduction band (CB) of ag-C₃N₄ to recombine with the holes in the valence band (VB) of CIS in the Z-scheme, leading to the enhanced separation efficiency of the photogenerated electrons in the CB of ag-C₃N₄ and the holes in the VB of CIS. The pollutant IBU was degraded by h⁺, ·O₂⁻ and ·OH, as determined by electron paramagnetic resonance (EPR) analysis.
Show more [+] Less [-]Biochar induced modification of graphene oxide & nZVI and its impact on immobilization of toxic copper in soil
2020
Mandal, Sandip | Pu, Shengyan | He, Lingling | Ma, Hui | Hou, Deyi
Biochar has recently been fascinating for research in many environment areas due to its potential applications. In this research, graphene, and nano zero-valent iron (nZVI) were integrated with biochar and used for copper immobilization in the soil. Initially, the biomass feedstock was pyrolyzed under N₂ atmosphere from 150 to 650 °C and immersed in an aqueous solution containing graphene, and then impregnated with nZVI. Laboratory characterization with different instruments (eg. SEM, TEM, XRD, UV–Vis, VSM, and XPS) showed that graphene sheets and reactive nZVI were loaded on the biochar surface during the development process. The 450 °C was considered as optimum pyrolysis temperature based on the effective surface properties of the obtain biochar material. Boehm titration and functional group analysis confirmed the presence of carboxylic groups, phenolic groups in the corn stack biochar supported graphene oxide/nZVI (CTBC-GO/nZVI). Thermogravimetric analysis showed that nZVI incorporation to biochar surface could improve thermal stability as compared to graphene oxide incorporated biochar and pristine biochar. The material was utilized for copper (Cu) immobilization in the soil and a comparative evaluation was established on the basis of efficiency. The soil experiment showed that the CTBC-GO/nZVI has a superior immobilization efficiency of copper than pristine biochar and GO@BC. The available Cu content decreased by > 65% in CTBC-GO/nZVI amended soil after 14 days. Sequential extraction procedure (SEP) results suggested that CTBC-GO/nZVI promoted the conversion of more accessible Cu into the less accessible and bioavailable forms to reduce the toxicity of Cu. Therefore, CTBC-GO/nZVI composite is a promising and effective amendment for immobilizing Cu in contaminated soils and improving soil properties.This work can put forward a strategy to develop magnetic biochar composites and an application towards toxic heavy metals immobilization in soil.
Show more [+] Less [-]Use of iron mining tailings from dams for carbon nanotubes synthesis in fluidized bed for 17α-ethinylestradiol removal
2020
Silva, Rayane Cristian Ferreira | Ardisson, José Domingos | Cotta, Alexandre Alberto Chaves | Araujo, Maria Helena | Teixeira, Ana Paula de Carvalho
This work reports the use of an iron ore tailings from waste dam as a catalyst and support for carbon nanotubes synthesis and their application in the adsorption of the 17α-ethinylestradiol hormone. The synthesis was carried out by Chemical Vapor Deposition (CVD) in a Fluidized Bed system using: ethylene at temperatures of 500, 600 and 700 °C, and acetonitrile at 500, 600, 700, 800 and 900 °C. The transmission electron microscopy (TEM) results showed that the two higher temperatures in each case favored the formation of nanostructures like carbon nanotubes (CNTs), with good yields. The ethylene source generated classic tubular structures of multiple walls. On the other hand, acetonitrile provided the formation of tubes with less organization, known as bamboo like. This morphology was caused by the insertion of nitrogen into the graphite structure (doping), which originates from the carbon source. The adsorptive capacity of the materials for 17α-Ethinylestradiol removal ranging from 9.2 mg g⁻¹ to 22.3 mg g⁻¹. The kinetic and adsorption isotherm studies were also performed for the systems. As for kinetics, all of them presented pseudo-second order behavior. In relation to the type of isotherm, the systems showed Freundlich behavior, that is, the adsorption occurs in multiple layers. Finally, it was concluded that the use of an iron ore tail as a catalyst in the production of CNTs by CVD is feasible. The materials synthesized still had good adsorptive capacity for an emerging contaminant, thus this study allowed the investigation of two environmental problems.
Show more [+] Less [-]The toxicity of graphene oxide affected by algal physiological characteristics: A comparative study in cyanobacterial, green algae, diatom
2020
Yin, Jingyu | Fan, Wenhong | Du, Juan | Feng, Weiying | Dong, Zhaomin | Liu, Yingying | Zhou, Tingting
Though the main toxic mechanisms of graphene oxide (GO) to algae have been accepted as the shading effect, oxidative stress and mechanical damage, the effect of algal characteristics on these three mechanisms of GO toxicity have seldom been taken into consideration. In this study, we investigated GO toxicity to green algae (Chlorella vulgaris, Scenedesmus obliquus, Chlamydomonas reinhardtii), cyanobacteria (Microcystis aeruginosa) and diatoms (Cyclotella sp.). The aim was to assess how the physiological characteristics of algae affect the toxicity of GO. Results showed that 10 mg/L of GO significantly inhibited the growth of all tested algal types, while S. obliquus and C. reinhardtii were found to be the most susceptible and tolerant species, respectively. Then, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to observe the physiological characteristics of the assessed algae. The presence of locomotive organelles, along with smaller and more spherical cells, was more likely to alleviate the shading effect. Variations in cell wall composition led to different extents of mechanical damage as shown by Cyclotella sp. silica frustules and S. obliquus autosporine division being prone to damage. Meanwhile, growth inhibition and cell division were significantly correlated with the oxidative stress and membrane permeability, suggesting the latter two indicators can effectively signal GO toxicity to algae. The findings of this study provide novel insights into the toxicity of graphene materials in aquatic environments.
Show more [+] Less [-]Electrochemical removal of levofloxacin using conductive graphene/polyurethane particle electrodes in a three-dimensional reactor
2020
Guo, Cuicui | Liu, Haiyang | Wang, Chengzhi | Zhao, Jianchen | Zhao, Wenjun | Lu, Nan | Qu, Jiao | Yuan, Xing | Zhang, Ya-nan
The conductive polyurethane/polypyrrole/graphene (CPU/PPy/Gr) particle electrode was prepared by an in-situ oxidative polymerization method and used as particle electrodes to degrade levofloxacin (LEV) in a three-dimensional electrode reactor. The prepared CPU/PPy/Gr electrode was characterized systematically and the effects of initial pH, initial LEV concentration, aeration volume, voltage, and electrolyte concentration on the degradation efficiency were investigated. Results showed that more than 90% LEV was degraded and the energy consumption was 20.12 kWh/g LEV under conditions of pH 7, 6 V voltage, 2.0 L/min aeration volume, 20 mg/L initial LEV concentration, and 7 mM concentration of electrolyte (Na₂SO₄). A possible electrochemical oxidation pathway of LEV by the CPU/PPy/Gr electrode was proposed. In addition, the biotoxicity of LEV and its oxidation products was calculated using ECOSAR (Ecological Structure Activity Relationships) program in EPISuite. Toxicity evaluation using luminescent bacteria showed that the toxicities of some intermediates were higher than the parent compound. But the toxicity of degradation processes for LEV was effective decreasing. A possible reactive mechanism in the three-dimensional reactor was also recommended. In brief, the prepared CPU/PPy/Gr particle electrode constitutes an insight into the promising practical application in the wastewater treatment.
Show more [+] Less [-]Electrochemical oxidation of ceftazidime with graphite/CNT-Ce/PbO2–Ce anode: Parameter optimization, toxicity analysis and degradation pathway
2020
Duan, Pingzhou | Gao, Shiheng | Lei, Jiawei | Li, Xiang | Hu, Xiang
In this work, the electrochemical degradation of antibiotic ceftazidime has been studied using a novel rare earth metal Ce and carbon nanotubes codoped PbO₂ electrode. A competitively high oxygen evolution potential (2.4 V) and enhanced catalytic surface area were obtained, evidence by LSV and CV electrochemical characterization. The G/CNT-Ce/PbO₂–Ce electrode possessed a more compact structure and a smaller grain size than the other PbO₂ and Ce–PbO₂ electrodes, exhibiting a prolonged service lifetime, evidence by accelerated lifespan test and recycling degradation experiment. As electrolysis time reached 120 min, the removal efficiency of ceftazidime and TOC arrived at 100.0% and 54.2% respectively in 0.05 M Na₂SO₄ solution containing 50 mg⋅L⁻¹ ceftazidime. The effect of applied current density, pH value, initial ceftazidime concentration and chloride contents on the degradation performance were systematically evaluated. The results demonstrated that electrochemical oxidation of ceftazidime over the G/CNT-Ce/PbO₂–Ce electrode was highly effective, and the mineralization rate was greatly improved, compared with pristine PbO₂ electrode. Considering the toxicity was increased after 30 min electrolysis, the intermediates were quantitatively investigated through HPLC-MS, GC-MS and IC technology. According to the identified products, a reaction mechanism has been proposed and pyridine and aminothiazole were detected with concentration from approximately 1 to 3 mg⋅L⁻¹, which were regarded as toxic byproducts during electrooxidation. Further electrocatalyzing by ring cleavage reaction and complete mineralization to CO₂, NO₃⁻ and NH₄⁺ was proposed, which demonstrated the G/CNT-Ce/PbO₂–Ce electrode exhibited high efficiency for ceftazidime removal in mild conditions.
Show more [+] Less [-]