Refine search
Results 1-10 of 17
Organic aerosol compositions and source estimation by molecular tracers in Dushanbe, Tajikistan
2022
Chen, Pengfei | Kang, Shichang | Zhang, Lanxin | Abdullaev, Sabur F. | Wan, Xin | Zheng, Huijun | Maslov, Vladimir A. | Abdyzhapar uulu, Salamat | Safarov, Mustafo S. | Tripathee, Lekhendra | Li, Yizhong
To elucidate the molecular composition and sources of organic aerosols in Central Asia, carbonaceous compounds, major ions, and 15 organic molecular tracers of total suspended particulates (TSP) were analyzed from September 2018 to August 2019 in Dushanbe, Tajikistan. Extremely high TSP concentrations (annual mean ± std: 211 ± 131 μg m⁻³) were observed, particularly during summer (seasonal mean ± std: 333 ± 183 μg m⁻³). Organic carbon (OC: 11.9 ± 7.0 μg m⁻³) and elemental carbon (EC: 5.1 ± 2.2 μg m⁻³) exhibited distinct seasonal variations from TSP, with the highest values occurring in winter. A high concentration of Ca²⁺ was observed (11.9 ± 9.2 μg m⁻³), accounting for 50.8% of the total ions and reflecting the considerable influence of dust on aerosols. Among the measured organic molecular tracers, levoglucosan was the predominant compound (632 ± 770 ng m⁻³), and its concentration correlated significantly with OC and EC during the study period. These findings highlight biomass burning (BB) as an important contributor to the particulate air pollution in Dushanbe. High ratios of levoglucosan to mannosan, and syringic acid to vanillic acid suggest that mixed hardwood and herbaceous plants were the main burning materials in the area, with softwood being a minor one. According to the diagnostic tracer ratio, OC derived from BB constituted a large fraction of the primary OC (POC) in ambient aerosols, accounting for an annual mean of nearly 30% and reaching 63% in winter. The annual contribution of fungal spores to POC was 10%, with a maximum of 16% in spring. Measurements of plant debris, accounting for 3% of POC, divulged that these have the same variation as fungal spores.
Show more [+] Less [-]Aromatic acids as biomass-burning tracers in atmospheric aerosols and ice cores: A review
2019
Wan, Xin | Kawamura, Kimitaka | Ram, Kirpa | Kang, Shichang | Loewen, Mark | Gao, Shaopeng | Wu, Guangming | Fu, Pingqing | Zhang, Yanlin | Bhattarai, Hemraj | Cong, Zhiyuan
Biomass burning (BB) is one of the largest sources of carbonaceous aerosols with adverse impacts on air quality, visibility, health and climate. BB emits a few specific aromatic acids (p-hydroxybenzoic, vanillic, syringic and dehydroabietic acids) which have been widely used as key indicators for source identification of BB-derived carbonaceous aerosols in various environmental matrices. In addition, measurement of p-hydroxybenzoic and vanillic acids in snow and ice cores have revealed the historical records of the fire emissions. Despite their uniqueness and importance as tracers, our current understanding of analytical methods, concentrations, diagnostic ratios and degradation processes are rather limited and scattered in literature. In this review paper, firstly we have summarized the most established methods and protocols for the measurement of these aromatic acids in aerosols and ice cores. Secondly, we have highlighted the geographical variability in the abundances of these acids, their diagnostic ratios and degradation processes in the environments. The review of the existing data indicates that the concentrations of aromatic acids in aerosols vary greatly with locations worldwide, typically more abundant in urban atmosphere where biomass fuels are commonly used for residential heating and/or cooking purposes. In contrast, their concentrations are lowest in the polar regions which are avoid of localized emissions and largely influenced by long-range transport. The diagnostic ratios among aromatic acids can be used as good indicators for the relative amounts and types of biomass (e.g. hardwood, softwood and herbaceous plants) as well as photochemical oxidation processes. Although studies suggest that the degradation processes of the aromatic acids may be controlled by light, pH and hygroscopicity, a more careful investigation, including closed chamber studies, is highly appreciated.
Show more [+] Less [-]Biomass burning source identification through molecular markers in cryoconites over the Tibetan Plateau
2019
Li, Quanlian | Wang, Ninglian | Barbante, Carlo | Kang, Shichang | Callegaro, Alice | Battistel, Dario | Argiriadis, Elena | Wan, Xin | Yao, Ping | Pu, Tao | Wu, Xiaobo | Han, Yu | Huai, Yanping
Cryoconite is a dark, dusty aggregate of mineral particles, organic matter, and microorganisms transported by wind and deposited on glacier surfaces. It can accelerate glacier melting and alter glacier mass balances by reducing the surface albedo of glaciers. Biomass burning in the Tibetan Plateau, especially in the glacier cryoconites, is poorly understood. Retene, levoglucosan, mannosan and galactosan can be generated by the local fires or transported from the biomass burning regions over long distances. In the present study, we analyzed these four molecular markers in cryoconites of seven glaciers from the northern to southern Tibetan Plateau. The highest levels of levoglucosan and retene were found in cryoconites of the Yulong Snow Mountain and Tienshan glaciers with 171.4 ± 159.4 ng g⁻¹ and 47.0 ± 10.5 ng g⁻¹ dry weight (d.w.), respectively. The Muztag glacier in the central Tibetan Plateau contained the lowest levels of levoglucosan and retene with mean values of 59.8 ng g⁻¹ and 0.4 ± 0.1 ng g⁻¹ d.w., respectively. In addition, the vegetation changes and the ratios of levoglucosan to mannosan and retene indicate that combustion of conifers significantly contributes to biomass burning of the cryoconites in the Yulong Snow Mountain and Tienshan glacier. Conversely, biomass burning tracers in cryoconites of Dongkemadi, Yuzhufeng, Muztag, Qiyi and Laohugou glaciers are derived from the combustion of different types of biomass including softwood, hardwood and grass.
Show more [+] Less [-]Biomass burning and fungal spores as sources of fine aerosols in Yangtze River Delta, China – Using multiple organic tracers to understand variability, correlations and origins
2019
Xu, Jingsha | Jia, Chunrong | He, Jun | Xu, Honghui | Tang, Yu-Ting | Ji, Dongsheng | You, Huan | Xiao, Hang | Wang, Chengjun
Research is restricted regarding impacts of biomass burning (BB) on fine aerosol (PM₂.₅), due mainly to lack of specific BB tracers. This study aims to characterize the variability, distributions, and contributions of BB and fungal spores as sources of PM₂.₅ using a multiple organic tracer approach. PM₂.₅ samples were collected at four representative sites in Yangtze River Delta (YRD), China every 6 days for one year. In the laboratory, samples were analyzed for three anhydrides (levoglucosan, mannosan, and galactosan), two sugar alcohols (arabitol and mannitol), water-soluble inorganic ions, and elemental/organic carbon (EC/OC). Levoglucosan was the most abundant BB tracer (mean concentration = 81 ng/m³), and fungal spore tracers arabitol and mannitol had similar abundances (5.6 and 5.7 ng/m³, respectively). Anhydrides and sugar alcohols had high within-group correlations, indicating their respective common sources. Concentrations of tracers displayed large temporal variations but small spatial variations, suggesting strong seasonality in BB and fungal spore sources. BB sources were burning of grass, pine needles, hardwood and crop straw, which were originated from transboundary/cross-region transport and local fire spots. PCA analyses revealed that the common sources of fine aerosols in YRD were secondary inorganic aerosols, soil dust, BB and fungal spores.
Show more [+] Less [-]Quantifying the relative importance of major tracers for fine particles released from biofuel combustion in households in the rural North China Plain
2021
Tao, Jun | Zhang, Zhisheng | Zhang, Leiming | Huang, Daojian | Wu, Yunfei
Biomass burning tracers have been widely used to identify biomass burning types, but such tools can sometimes cause large uncertainties in the source attribution studies of PM₂.₅ (particles with an aerodynamic diameter of smaller than 2.5 μm). To quantify the relative importance of the major biomass burning tracers in PM₂.₅ released from biofuels combusted in the North China Plain, combustion experiments under the smoldering and flaming combustion conditions were conducted using nine types of typical household biofuels including two types of agricultural wastes, five types of hardwoods, one softwood, and one mixed wood briquette. PM₂.₅ samples were collected from the combustion experiments and source profiles of PM₂.₅ were thus determined for various biofuels under the two different combustion conditions. Carbonaceous species including organic carbon (OC) and elemental carbon (EC) were the major chemical components of the PM₂.₅ released from combustion of all the tested biofuels, with mass fractions of 37–45% and 4–7% under the smoldering condition and 11–25% and 7–29% under the flaming condition, respectively. Higher mass fractions of water-soluble inorganic ions (WSIIs, e.g., K⁺ and Cl⁻) in PM₂.₅ were observed under the flaming than smoldering combustion condition, while anhydrosugars (levoglucosan (LG) and mannosan (MN)) presented in an opposite pattern. The average LG/MN ratio in PM₂.₅ changed significantly with biofuel type (20–55 for agricultural wastes, 10–22 for hardwoods (except elm) and 3–6 for softwood), but varied little with combustion condition. In contrast, the K⁺/LG ratio in PM₂.₅ varied significantly between smoldering (<0.2) and flaming (>0.6) combustion conditions for all the biofuel types except softwood. Results from this study suggested that the ratio LG/MN was the best tracer for identifying the biofuel types and the ratio K⁺/LG is suitable for identifying the combustion conditions in this region.
Show more [+] Less [-]Impacts of springtime biomass burning in the northern Southeast Asia on marine organic aerosols over the Gulf of Tonkin, China
2018
Zheng, Lishan | Yang, Xiaoyang | Lai, Senchao | Ren, Hong | Yue, Siyao | Zhang, Yingyi | Huang, Xin | Gao, Yuanguan | Sun, Yele | Wang, Zifa | Fu, Pingqing
Fine particles (PM2.5) samples, collected at Weizhou Island over the Gulf of Tonkin on a daytime and nighttime basis in the spring of 2015, were analyzed for primary and secondary organic tracers, together with organic carbon (OC), elemental carbon (EC), and stable carbon isotopic composition (δ13C) of total carbon (TC). Five organic compound classes, including saccharides, lignin/resin products, fatty acids, biogenic SOA tracers and phthalic acids, were quantified by gas chromatography/mass spectrometry (GC/MS). Levoglucosan was the most abundant organic species, indicating that the sampling site was under strong influence of biomass burning. Based on the tracer-based methods, the biomass-burning-derived fraction was estimated to be the dominant contributor to aerosol OC, accounting for 15.7% ± 11.1% and 22.2% ± 17.4% of OC in daytime and nighttime samples, respectively. In two episodes E1 and E2, organic aerosols characterized by elevated concentrations of levoglucosan as well as its isomers, sugar compounds, lignin products, high molecular weight (HMW) fatty acids and β-caryophyllinic acid, were attributed to the influence of intensive biomass burning in the northern Southeast Asia (SEA). However, the discrepancies in the ratios of levoglucosan to mannosan (L/M) and OC (L/OC) as well as the δ13C values suggest the type of biomass burning and the sources of organic aerosols in E1 and E2 were different. Hardwood and/or C4 plants were the major burning materials in E1, while burning of softwood and/or C3 plants played important role in E2. Furthermore, more complex sources and enhanced secondary contribution were found to play a part in organic aerosols in E2. This study highlights the significant influence of springtime biomass burning in the northern SEA to the organic molecular compositions of marine aerosols over the Gulf of Tonkin.
Show more [+] Less [-]Soil Nitrogen and Mercury Dynamics Seven Decades After a Fire Disturbance: a Case Study at Acadia National Park
2019
Patel, Kaizad F. | Jakubowski, Michael D. | Fernandez, Ivan J. | Nelson, Sarah J. | Gawley, William
Forest soils (mainly soil organic carbon) play an important role in the retention of nitrogen and mercury, and loss of the forest floor during wildfires can stimulate N and Hg losses. In this paper, we investigate long-term impacts of forest fire on soil N and Hg concentrations at Acadia National Park (ANP) in Maine. Acadia National Park experienced a severe fire in 1947. Within the national park, Hadlock Brook watershed was left unburned, whereas most of Cadillac Brook watershed was intensely burned, with substantial loss of the forest floor. Post-fire regeneration in Cadillac was mostly as hardwood species, whereas vegetation in Hadlock remained predominantly softwood. We sampled soils in both watersheds in 2015, approximately 70 years after the fire. The soils were analyzed for total carbon (TC), total nitrogen (TN), total mercury (THg), and methylmercury (MeHg) content. Compared to Hadlock, Cadillac soils had ~ 50% lower TC, ~ 40% lower TN, and ~ 50% lower THg content, reflecting the loss of forest floor 70 years ago. Methylmercury concentrations in Cadillac were approximately 2 times the concentrations in Hadlock, indicating that conditions were more conducive to methylation, potentially due to differences in forest type. Long-term comparisons of stream DOC, NO₃⁻, and THg concentrations between the two watersheds demonstrated that concentrations were significantly lower in Cadillac Brook, reflecting greater retention in Cadillac and a legacy of lower atmospheric deposition in the hardwood as compared to softwood watershed. This study provides insights on the multi-decadal recovery from a stand-replacing disturbance and underscores the persistence of altered soil biogeochemistry.
Show more [+] Less [-]Economic and Environmental Benefits of Using Hardwood Sawmill Waste as a Raw Material for Particleboard Production
2009
Setunge, Sujeeva | Wong, Kee Kong | Jollands, Margaret
Annually, sawmills and other wood-processing factories generate a significant amount of scrap materials which are sent to landfills or incinerated. The amount of residue generated in Australia annually is estimated at 200,000 tonnes. A research project conducted at RMIT University explored utilizing these waste materials as particleboard furnish. The research team has now established a methodology for making particleboard in the laboratory using 100% hardwood sawmill residues, developing a particleboard product made in the laboratory which has acceptable mechanical properties and density profiles in accordance with the Australian Standards. However, this board product has some perceived issues which have been hindering ready commercial uptake. The current product requires a 10% higher resin load, has a 10% higher board density, and requires 10% longer pressing times compared to normal softwood particleboard. The paper presents an analysis of the current production process of particleboard to investigate the economic feasibility of particleboard production using hardwood sawmill residues. A major challenge in the analysis is converting the environmental benefit of utilizing large quantities of sawmill residue to a monetary term. Investigation of the global impact of particleboard by considering emission of carbon dioxide to the atmosphere is also included. A comparison is presented between different methods of disposing wood residues to understand the environmental benefit of using hardwood residue in particleboard.
Show more [+] Less [-]Inventory review and environmental evaluation of first- and second-generation sugars through life cycle assessment
2021
Bello, Sara | Salim, Iana | Feijoo, Gumersindo | Moreira, Maria Teresa
In recent years, there has been a great movement towards the generation of knowledge related to the biorefinery concept. First-generation biorefineries bear the stigma of using arable land and edible crops for fuel instead of as sources of food and feed. However, second-generation biorefineries have not reached the level of full technical feasibility. Bearing in mind the objective of sugar production from sugar, starch, or lignocellulosic raw materials, the purpose of this study is to assess the environmental impact of first- and second-generation biorefineries, considering as an example for the comparative evaluation, the production of sugar fractions from crops (starch and sugar crops), and lignocellulosic biomass (hardwood and softwood). The characterization results were obtained using the ReCiPe 1.1 model, implemented through the SimaPro 9.0 software. Both production systems are inherently different and have strengths and weaknesses that must be carefully analyzed. The resulting environmental profile shows that the silviculture of wood contributes less to the environmental impact than cropping activities in most impact categories. In general, this study suggests that first-generation systems are burdened environmentally by the use of fertilizers, which have a significant impact on categories such as marine and freshwater eutrophication and terrestrial acidification, while second-generation systems are limited by the intensive processing steps needed for delignification, typically involving the use of chemicals and/or energy. LCA in early stages of the production of bio-based building blocks, rather than on the manufacture of biofuels or bioplastics, allows the precise identification of the environmental burdens that may be influencing the overall environmental profile of a biorefinery.
Show more [+] Less [-]Remediating Montreal’s Tree Pit Soil Applying an Ash Tree-Derived Biochar
2018
Seguin, Rose | Kargar, Maryam | Prasher, ShivO. | Grant Clark, O. | Jutras, Pierre
Biochar as a soil amendment in street tree pits can be used to increase the soil’s ability to retain contaminants found in urban runoff. The increased retention can potentially decrease peak concentrations of soluble trace metals and de-icing salts in the soil solution, thereby decreasing the amounts taken up by tree roots or percolated out of the tree pits into the ground water. A leaching test measured the retention of trace metals (Cd, Zn, Cu, and Pb) and deicing salts (Na) by different kinds of biochar. The biochar was produced from hardwood (North American ash tree, Fraxinus americana) under different pyrolysis conditions, with three temperatures (350, 465 and 550 °C) and two residence times (10 and 30 min). Biochar pyrolyzed at 550 °C for 30 min significantly reduced the soluble concentrations of Zn, Cu, and Pb in the column leachate, most likely due to the its higher pH, surface area, and ash content. The pH of each treatment group was measured while the increase in ash content and surface area was inferred according to relevant literature. This biochar was then combined with soil and compost at rates ranging from 0 to 7.5% by dry weight to determine the proportion that optimally sorbed the contaminants. An application rate of 7.5% biochar by dry weight increased the soil mixture’s sorption capacity for Cd and Na while maintaining similar sorption of Cu, Zn, and Pb. The role of organic matter, such as that in compost, was especially important for the sorption of Zn and Cu. Hardwood biochar can thus improve the health of street trees and groundwater quality by sequestering trace metals and de-icing salts. Biochar can also be a useful tool to remediate contaminated soil, especially in urban environments.
Show more [+] Less [-]