Refine search
Results 1-10 of 116
Yeast biomass-induced Co2P/biochar composite for sulfonamide antibiotics degradation through peroxymonosulfate activation
2021
Peng, Yuanyuan | Tong, Wenhua | Xie, Yi | Hu, Wanrong | Li, Yonghong | Zhang, Yongkui | Wang, Yabo
Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have attracted increasing attention in recent years for organic pollutants removal. Herein, we put forward a facile method to form cobalt phosphide/carbon composite for PMS activation. Combining impregnation approach with pyrolysis treatment enabled the formation of Co₂P/biochar composites using baker’s yeast and Co²⁺ as precursors. The as-synthesized products exhibited excellent catalytic activity for sulfamethoxazole (SMX) degradation over the pH range 3.0–9.0 b y activating PMS. For example, 100% of SMX (20 mg L⁻¹) removal was achieved in 20 min with catalyst dosage of 0.4 g L⁻¹ and PMS loading of 0.4 g L⁻¹. Near zero Co²⁺ leaching was observed during catalytic reaction, which remarkably lowered the toxic risk of transition metal ion in water. Meanwhile, the reusability of catalyst could be attained by thermal treatment. SMX degradation intermediates were identified by liquid chromatography-mass spectrometry (LC-MS), which facilitated the proposal of possible SMX degradation pathways. Ecological Structure Activity Relationships (ECOSAR) analysis indicated that SMX degradation intermediates may not pose ecological toxicity to the environment. Further investigation verified that Co₂P/biochar composites could set off PMS activation not only for the degradation of SMX but also for other sulfonamides. In this study, we not only developed a facile method of utilizing environmental-benign biomass for transition metal phosphide/carbon composite formation, but also achieved highly efficient antibiotic elimination by PMS-based AOP.
Show more [+] Less [-]Formation of brominated pollutants during the pyrolysis and combustion of tetrabromobisphenol A at different temperatures
2014
Ortuño, Nuria | Moltó, Julia | Conesa, Juan A. | Font, Rafael
Tetrabromobisphenol A (TBBPA) is the most widely used brominated flame retardant worldwide. A detailed examination of the degradation products emitted during thermal decomposition of TBBPA is presented in the study. Runs were performed in a laboratory furnace at different temperatures (650 and 800 °C) and in different atmospheres (nitrogen and air). More than one hundred semivolatile compounds have been identified by GC/MS, with special interest in brominated ones. Presence of HBr and brominated light hydrocarbons increased with temperature and in the presence of oxygen. Maximum formation of PAHs is observed at pyrolytic condition at the higher temperature. High levels of 2,4-, 2,6- and 2,4,6- bromophenols were found. The levels of polybrominated dibenzo-p-dioxins and furans have been detected in the ppm range. The most abundant isomers are 2,4,6,8-TeBDF in pyrolysis and 1,2,3,7,8-PeBDF in combustion. These results should be considered in the assessment of thermal treatment of materials containing brominated flame retardants.
Show more [+] Less [-]Waste recombinant DNA: Effectiveness of thermo-treatment to manage potential gene pollution
2009
Fu, Xiaohua | Li, Mengnan | Zheng, Guanghong | Le, Yiquan | Wang, Lei
Heating at 100 °C for 5-10 min is a common method for treating wastewater containing recombinant DNA in many bio-laboratories in China. In this experiment, plasmid pET-28b was used to investigate decay efficiency of waste recombinant DNA during thermo-treatment. The results showed that the decay half-life of the plasmid was 2.7-4.0 min during the thermo-treatment, and even heating for 30 min the plasmids still retained some transforming activity. Low pH promoted the decay of recombinant DNA, but NaCl, bovine serum albumin and EDTA, which existed in the most wastewater from bio-laboratories, protected DNA from degradation. Thus, the decay half-life of plasmid DNA may be longer than 2.7-4.0 min practically. These results suggest that the effectiveness of heating at 100 °C for treating waste recombinant DNA is low and a gene pollution risk remains when those thermo-treated recombinant DNAs are discharged into the environment. Therefore other simple and effective methods should be developed. Heating at 100 °C for 5-10 min to treat waste recombinant DNA has potential eco-risk.
Show more [+] Less [-]Multidrug-resistant enteroaggregative Escherichia coli (EAEC) enters dormant state during heat treatment: A potential hazard in municipal sludge
2022
Zhang, Bingni | Fu, Yulong | Wang, Feiyu | Yang, Jiawen | Pan, Zhiyu | Huang, Meiling | Shen, Kewei | Shen, Chaofeng
Reuse of sewage sludge is a general trend and land application is an essential way to reuse sludge. The outbreak of coronavirus disease has raised concerns about human pathogens and their serious threat to public health. The risk of pathogenic bacterial contamination from land application of municipal sludge has not been well assessed. The purpose of this study was to investigate the presence of pathogenic bacteria in municipal sewage sludge and to examine the survival potential of certain multidrug-resistant enteroaggregative Escherichia coli (EAEC) strain isolated from sewage sludge during heat treatment. The sewage sludge produced in the two wastewater treatment plants contained pathogenic bacteria such as pathogenic E. coli, Shigella flexneri, and Citrobacter freundii. The environmental strain of EAEC isolated from the sludge was resistant to eight types of antibiotics. It could also enter the dormant state after 4.5 h of treatment at 55 °C and regrow at 37 °C, while maintaining its antibiotic resistance. Our results indicate that the dormancy of EAEC might be why it is heat-resistant and could not be killed completely during the sludge heat treatment process. Owing to the regrowth of the dormant pathogenic bacteria, it is risky to apply the sludge to land even if the sludge is heat-treated, and there is also a risk of spreading antibiotic resistance.
Show more [+] Less [-]Use of thermally modified waste concrete powder for removal of Pb (II) from wastewater: Effects and mechanism
2021
Ma, Zihan | Xue, Runze | Li, Jiang-shan | Zhao, Yaqin | Xue, Qiang | Chen, Zhen | Wang, Qiming | Poon, C. S. (Chi-sun)
Exploring effective uses of waste concrete powder (WCP), produced from recycling of construction & demolition waste is beneficial to the environment and sustainable development. In this study, WCP was first treated thermally to enhance the ability to remove Pb (II) from aqueous solutions. The experimental results revealed that the thermal treatment could enhance adsorption capacity due to modification of calcium bonding and pore structure of WCP. Preparation parameters such as temperature, particle size, and water-cement ratio were investigated to obtain the optimal operational conditions. Batch adsorption experiments were performed to explore influence factors of pH (1.00–6.00), ionic strength (0.05–2 mol/L), dosage (2–50 g/L), and temperature (25–45 °C). The pseudo-second-order kinetics model could adequately describe the adsorption process, and the Langmuir model was capable to predict the isotherm data well in the low concentration region (C₀ < 500 mg/L). The maximum uptake capacity for Pb (II) calculated by Langmuir model at 25, 35 and 45 °C were 46.02, 38.58 and 30.01 mg/g respectively, and the removal rate of Pb (II) was 92.96% at a dosage of 50 g/L (C₀ = 1000 mg/L). Precipitation, ion exchange, and surface complexation were identified to be the main mechanisms of Pb (II) adsorption through microscopic investigation by SEM-EDX, XRD, FTIR, XPS, and BET inspections. The study confirms that the WCP after thermal modification, can be selected as a promising adsorbent for the high performance and eco-friendliness.
Show more [+] Less [-]Comparison of ashing and pyrolysis treatment on cadmium/zinc hyperaccumulator plant: Effects on bioavailability and metal speciation in solid residues and risk assessment
2021
Zhang, Jin | Wu, Shuai | Xu, Jialin | Liang, Peng | Wang, Minyan | Naidu, R. | Liu, Yanju | Man, Yu Bon | Wong, Ming Hung | Wu, Shengchun
Phytoremediation of metal(loid)s contaminated sites is widely used, while there is scarce of investigation on the metal-enriched biomass waste safely disposal which resulted in risks of causing secondary pollution to the soil and water bodies and even to human health. Thus, this study compared the effects of ashing and pyrolysis treatments on cadmium (Cd) and zinc (Zn) hyperaccumulation plant Sedum plumbizincicola. Chemical speciation, the Toxicity Characteristic Leaching Procedure (TCLP), and diethylenetriamine pentaacetic acid (DTPA) extraction were employed to characterize the bioavailability and leachability of Cd and Zn in the solid residues after pyrolysis and ashing. The risk assessment code (RAC) and potential ecological risk index (RI) were subsequently used to evaluate the risk of the solid residues to the environment. The results showed that both ashing and pyrolysis treatments could transform the bioavailable Cd and Zn in S. plumbizincicola into a more stable form, and the higher the temperature the greater the stablility. Pyrolysis converted a maximum of 80.0% of Cd and 70.3% of Zn in S. plumbizincicola to the oxidisable and residual fractions, compared with ashing which achieved only a ∼42% reduction. The pyrolysis process minimised the risk level of Cd and Zn to the environment based on the RAC and RI assessments. The results of the TCLP test, and DTPA extraction confirmed that the leaching rate and the bioavailable portion of Cd and Zn in the biochars produced by pyrolysis were invariably significantly (p < 0.05) lower than the solid residues produced by ashing, and reached the lowest at 650 °C. In other words, pyrolysis was better than ashing for thermal treatment of the metal-enriched hyperaccumulator plant, in view of minimising the bioavailability and leachability of Cd and Zn from the solid residues to the environment. This study provides fundamental data on the choice of treatments for the disposal of metal-enriched plant biomass.
Show more [+] Less [-]Study on the remediation of tetracycline antibiotics and roxarsone contaminated soil
2021
Zhan, Lu | Xia, Zhiwen | Hsu, Chen-Min | Xie, Bing
Antibiotics are commonly used in livestock and poultry breeding along with organic arsenic. Through long-term accumulation, they can enter into the surrounding soil through various pathways and contaminate the soil. In this paper, tetracycline antibiotics (TCs) and roxarsone (ROX) contaminated soil were used as the representatives of the two kinds of veterinary drugs contaminated soil, respectively, to study the thermal desorption behavior and arsenic stabilization process. Different parameters like heating temperatures, heat duration, stabilizer type and dosage were optimized for effective removal of TCs and ROX. Furthermore, TCs and ROX removal path and ROX stabilization mechanism were explored. Results of the study showed that over 98% of tetracycline antibiotics and roxarsone were effectively removed at 300 °C for 60 min. The heat treatment process of TCs contaminated soil was controlled by the first-order kinetics. Based on the detection of degradation products and thermogravimetric analysis, the possible thermal degradation path of TCs and ROX was proposed. Addition of FeSO₄.7H₂O (10% by weight) as stabilizer during the heat treatment process yielded 96.7% stabilization rate. Through the analysis of arsenic fractions, valence and the characterization of soil samples collected after the heat treatment, mechanism of arsenic stabilization in ROX was explored. The results show that thermal treatment combined with chemical stabilization technology can not only degrade TCs and ROX efficiently and completely, but also convert organic arsenic into inorganic state, which is conducive to better stabilization, and finally achieve effective and safe remediation of this kind of contaminated soil.
Show more [+] Less [-]Stabilization process and potential of agro-industrial waste on Pb-Contaminated soil around Pb–Zn mining
2020
Zhang, Yan | Wang, Xuemei | Ji, Hongbing
Sawdust wastes were used as precursors to prepare adsorbents by combustion and pyrolysis for experimental and mechanism studies and determine the potential of biomass extracted from agro-industrial residues for Pb-polluted soil remediation. Pot experiments were conducted on contaminated soils near Pb–Zn mining with sawdust ash (SA) and sawdust biochar (SB) in different proportions and dosage ratios. Studies have indicated that the application of biomass materials can enhance the adsorption, complexation and precipitation of Pb cations in soil and reduce the mobility of Pb. The concentrations of SPLP-Pb and DTPA-extractable Pb in amended soils were the lowest under 1% 1:2 and 5% 1:1 treatment, respectively. Results of fraction extraction and XANES analysis showed that the materials change the main forms of Pb in soil. Moreover, the binding behavior of Pb with organic matter increases the proportion of Pb (Ac)₂, leading to the transformation of high toxicity Pb-compounds into precipitates and complexes. The remediation methods of 2% 1:2 and 5% 1:2 were better than those of other methods in stabilizing Pb in soil. This study indicated that heat-treated sawdust can be used for Pb-polluted soil remediation, which is a type of environmental remediation measure with considerable ecological potential.
Show more [+] Less [-]Particulate emissions of a modern diesel passenger car under laboratory and real-world transient driving conditions
2020
Wihersaari, Hugo | Pirjola, Liisa | Karjalainen, Panu | Saukko, Erkka | Kuuluvainen, Heino | Kulmala, Kari | Keskinen, Jorma | Rönkkö, Topi
Exhaust emissions from diesel vehicles are significant sources of air pollution. In this study, particle number emissions and size distributions of a modern Euro 5b -compliant diesel passenger car exhaust were measured under the NEDC and US06 standard cycles as well as during different transient driving cycles. The measurements were conducted on a chassis dynamometer; in addition, the transient cycles were repeated on-road by a chase method. Since the diesel particulate filter (DPF) removed practically all particles from the engine exhaust, it was by-passed during most of the measurements in order to determine effects of lubricant on the engine-out exhaust aerosol. Driving conditions and lubricant properties strongly affected exhaust emissions, especially the number emissions and volatility properties of particles. During acceleration and steady speeds particle emissions consisted of non-volatile soot particles mainly larger than ∼50 nm independently of the lubricant used. Instead, during engine motoring particle number size distribution was bimodal with the modes peaking at 10–20 nm and 100 nm. Thermal treatment indicated that the larger mode consisted of non-volatile particles, whereas the nanoparticles had a non-volatile core with volatile material condensed on the surfaces; approximately, 59–64% of the emitted nanoparticles evaporated. Since during engine braking the engine was not fueled, the origin of these particles is lubricant oil. The particle number emission factors over the different cycles varied from 1.0 × 10¹⁴ to 1.3 × 10¹⁵ #/km, and engine motoring related particle emissions contributed 12–65% of the total particle emissions. The results from the laboratory and on-road transient tests agreed well. According to authors’ knowledge, high particle formation during engine braking under real-world driving conditions has not been reported from diesel passenger cars.
Show more [+] Less [-]Analysis of microbeads in cosmetic products in the United Arab Emirates
2020
Habib, Rana Zeeshan | Salim Abdoon, Morog Mohammed | Al Meqbaali, Reem Mohammed | Ghebremedhin, Furtuna | Elkashlan, Marim | Kittaneh, Wajeeh Faris | Cherupurakal, Nizamudeen | Mourad, Abdel-Hamid Ismail | Thiemann, Thies | Al Kindi, Ruwaya
The microparticle content of 37 common facial and body scrubs commercially available in the United Arab Emirates was analyzed. The chemical composition, ash content, physical characteristics, loading, particle size and shape of the microparticles were determined. Only 11 out of 37 products were found to have microplastic content. Many of the remaining products exhibited microparticles composed of microcrystalline cellulose and crushed walnut shells. Differential scanning calorimetry showed that microplastic products had softening points as low as 84 °C. Plastic microbeads of 2 products were found to fuse at 100 °C. The fusion altered the flotation characteristics of the microbeads of one product. Heat treatment of the product at 100 °C in the presence of silica gel led to entrainment of the silica and partial fragmentation of the beads upon cooling. This may be understood as one mechanism of fragmentation of a microplastic with a low softening point in the presence of hard soil particles under temperature cycling.
Show more [+] Less [-]