Mercury (Hg) is a persistent and widespread heavy metal with neurotoxic effects in wildlife. While bioaccumulation of Hg has historically been studied in aquatic food webs, terrestrial consumers can become contaminated with Hg when they feed on aquatic organisms (e.g., emergent aquatic insects, fish, and amphibians). However, the extent to which dietary connectivity to aquatic ecosystems can explain patterns of Hg bioaccumulation in terrestrial consumers has not been well studied. Bats (Order: Chiroptera) can serve as a model system for illuminating the trophic transfer of Hg given their high dietary diversity and foraging links to both aquatic and terrestrial food webs. Here we quantitatively characterize the dietary correlates of long-term exposure to Hg across a diverse local assemblage of bats in Belize and more globally across bat species from around the world with a comparative analysis of hair samples. Our data demonstrate considerable interspecific variation in hair total Hg concentrations in bats that span three orders of magnitude across species, ranging from 0.04 mg/kg in frugivorous bats (Artibeus spp.) to 145.27 mg/kg in the piscivorous Noctilio leporinus. Hg concentrations showed strong phylogenetic signal and were best explained by dietary connectivity of bat species to aquatic food webs. Our results highlight that phylogeny can be predictive of Hg concentrations through similarity in diet and how interspecific variation in feeding strategies influences chronic exposure to Hg and enables movement of contaminants from aquatic to terrestrial ecosystems.

Tin is a naturally occurring heavy metal that occurs in the environment in both inorganic and organic forms. Human exposure to tin is almost ubiquitous; however, surprisingly little is known about factors affecting environmental tin exposure in humans. This study analyzed demographic, socioeconomic and lifestyle factors associated with total urinary tin levels in adults (N = 3522) and children (N = 1641) participating in the National Health and Nutrition Examination Survey (NHANES) 2011–2014, a nationally representative health survey in the United States. Urinary tin levels, a commonly used biomarker of environmental tin exposure, were determined by inductively coupled plasma mass spectrometry (ICP-MS). Detection frequencies of tin were 87.05% in adults and 91.29% in children. Median and geometric mean levels of urinary tin in the adult population were 0.42 μg/L and 0.49 μg/L, respectively. For children, median and geometric mean levels of urinary tin were 0.60 μg/L and 0.66 μg/L, respectively. Age was identified as an important factor associated with urinary tin levels. Median tin levels in the ≥60 year age group were almost 2-fold higher than the 20–39 year age group. Tin levels in children were 2-fold higher than in adolescents. Race/ethnicity and household income were associated with tin levels in both adults and children. In addition, physical activity was inversely associated with urinary tin levels in adults. These results demonstrate that total tin exposures vary across different segments of the general U.S. population. Because the present study does not distinguish between organic and inorganic forms of tin, further studies are needed to better characterize modifiable factors associated with exposures to specific tin compounds, with the goal of reducing the overall exposure of the U.S. population.

A method was proposed to evaluate comprehensive effects of pHs and total metal concentration (TMC) variation for metal speciation human health risk in groundwater. The method used for the health assessment considered comprehensive and mutative effects caused by oral ingestion of groundwater based on human health risk assessment model and MINTEQ simulation. The results demonstrated that the dissolution rate of Ni2+ was affected by pH and Ni total concentration (total-Ni). With the increase of pH, the Ni2+ dissolved rate was smaller in the higher total-Ni at same pH. Ni2+ was dominant components contributed to health risk in groundwater. With the increase of pH in various total-Ni, HINi keep constant at first, and then decreased gradually. The HINi values of Ni speciation above acceptable level only in high total-Ni with alkaline conditions. The obtained results to verify that metals speciation were determined in health risk, and variation factors (pH and metal total concentration) played important role in risk estimation. These results provide basic information of heavy metal pollution control as well as remediation management.

Soil aggregates are often considered the basic structural elements of soils. Aggregates of different size vary in their ability to retain or transfer heavy metals in the environment. Here, after incubation of a sieved (<2 mm) topsoil with copper, bulk soil was separated into four aggregate-size fractions and their adsorption characteristics for Cu were determined. By combining nano-scale secondary ion mass spectrometry and C-1s Near Edge X-ray Absorption Fine Structure Spectroscopy, we found that copper tends to bind onto organic matter in the <2 μm and 20–63 μm aggregates. Surprisingly, Cu correlated with carboxyl-C in the <2 μm aggregates but with alkyl-C in the 20–63 μm aggregates. This is the first attempt to visualize the spatial distribution of copper in aggregate size fractions. These direct observations can help improve the understanding of interactions between heavy metals and various soil components.

Long-term trends of sediment compositions are important for assessing the impact of human activities on the sediment and protecting the sediment environment. In this study, based on the contents of heavy metals and the Pb isotope ratios in lake sediments, atmospheric dustfall and soil in Yixing, China, the representative heavy metals (Zn, Pb, Cr and Cd) in lake sediments from western Taihu Lake were studied. The evolution history of heavy metals in the local environment was constructed for the past 100 years. From 1892 to the 1990s, the anthropogenic fluxes of the representative heavy metals were negligible, indicating minimal anthropogenic emissions of heavy metals. Since the 1990s, anthropogenic fluxes of the representative heavy metals began to increase, concurrent with the economic growth and development in the western Taihu Lake Basin after the Chinese economic reform. The maximum flux percentage of the heavy metals in the sediments, caused by human activities, is 23.0% for Zn, 31.6% for Pb, 39.5% for Cr and 85.3% for Cd, indicating that most of the Cd comes from human activities. The Cd content in the western Taihu Lake Basin was significantly higher than that in the other areas, and the rapid development of the industry in the western Taihu Lake Basin and ceramics in Yixing led to the enrichment of heavy metals in local sediments. Since the 21st century, measures have been taken to control the pollution of heavy metals, including the increase in local government attention and the deployment of environmental monitoring technology. However, heavy metal content remains high, and the Pb content is still increasing. The ratios of Pb isotopes show that the main sources of heavy metals in the western Taihu Lake sediments, the local soil of Yixing and the atmospheric dustfall are coal combustion, leaded gasoline combustion, industrial wastewater and domestic sewage.

Sediment samples from three coastal sites - two beach resorts (Beach 1 and Beach 2 sites) and an area lying between an oil refinery and a river estuary (Estuarine site) - were analyzed for antibiotic- and heavy metal (HM)-resistant enterococci.A total of 123 enterococci, 36 E. faecium, 34 E. casseliflavus, 33 E. hirae, 5 E. faecalis, 3 E. durans, 3 E. gallinarum, and 9 Enterococcus spp, were recovered. Strains resistant to erythromycin, tetracycline and quinupristin/dalfopristin (Q/D) were recovered from all sites, whereas multidrug-resistant isolates were recovered only from “Beach 2” (14%) and “Estuarine” (3.7%). As regards HM resistance, the strains showed a high frequency (68%) of cadmium and/or copper resistance and uniform susceptibility to mercury. The prevalence of cadmium-resistant strains was significantly higher among erythromycin-resistant than among erythromycin-susceptible strains. A significant association between cadmium or copper resistance and Q/D resistance was also observed at “Estuarine” site. The levels of the two HMs in sediment from all sites were fairly low, ranging from 0.070 to 0.126 μg/g, for cadmium and from 1.00 to 7.64 μg/g for copper. Mercury was always undetectable. These findings are consistent with reports that low HM concentrations may contribute to co-selection of antibiotic-resistant bacterial strains, including enterococci.

Natural levels of heavy metals (HM) have increased during the industrial era to the point of posing a serious threat to the environment. The use of tree species to record contamination is a well-known practice. The objective of the study was to compare HM levels under different pollution conditions: a) soil pollution due to mining waste; b) atmospheric pollution due to coal-fired power plant emissions. We report significant HM enrichment in Pinus halepensis tissues. Near a burning power plant, Pb content in a tree wood was 2.5-fold higher that in natural areas (no pollution; NP). In mining areas, Cd content was 25-fold higher than NP. The hypothesis that HM contents in tree rings should register pollution is debatable. HM uptake by pines from soil, detoxification mechanisms and resuspended local soil dust is involved in HM contents in wood and bark.

Rhizospheric microbes play important roles in plant growth and heavy metals (HMs) transformation, possessing great potential for the successful phytoremediation of environmental pollutants. In the present study, the rhizosphere of Elsholtzia haichowensis Sun was comprehensively studied to uncover the influence of environmental factors (EFs) on the whole microbial communities including bacteria, fungi and archaea, via quantitative polymerase chain reaction (qPCR) and high-throughput sequencing. By analyzing molecular ecological network and multivariate regression trees (MRT), we evaluated the distinct impacts of 37 EFs on soil microbial community. Of them, soil pH, HMs, soil texture and nitrogen were identified as the most influencing factors, and their roles varied across different domains. Soil pH was the main environmental variable on archaeal and bacterial community but not fungi, explaining 25.7%, 46.5% and 40.7% variation of bacterial taxonomic composition, archaeal taxonomic composition and a-diversity, respectively. HMs showed important roles in driving the whole microbial community and explained the major variation in different domains. Nitrogen (NH4-N, NO3-N, NO2-N and TN) explained 47.3% variation of microbial population composition and 15.9% of archaeal taxonomic composition, demonstrating its influence in structuring the rhizospheric microbiome, particularly archaeal and bacterial community. Soil texture accounted for 10.2% variation of population composition, 28.9% of fungal taxonomic composition, 19.2% of fungal a-diversity and 7.8% of archaeal a-diversity. Rhizosphere only showed strong impacts on fungi and bacteria, accounting for 14.7% and 4.9% variation of fungal taxonomic composition and bacterial a-diversity. Spatial distance had stronger influence on bacteria and archaea than fungi, but not as significant as other EFs. For the first time, our study provides a complete insight into key influential EFs on rhizospheric microbes and how their roles vary across microbial domains, giving a hand for understanding the construction of microbial communities in rhizosphere.

Ants accumulate heavy metals and respond to pollution with modification in species composition, community structure, altered behaviour and immunity. However, the levels of heavy metals in ants’ nests and explicit individual-level responses towards heavy metals have not been revealed. We found that red wood ants Formica lugubris accumulate high and correlated values of such heavy metals as Al, Cd, Co, Cu, Fe, Ni, Pb and Zn both in ants and nest material near cobalt smelter in Finland. Relative differences in metal concentrations were higher in nests than in ants. The highest values were obtained for elements such as Co (36.6), Zn (14.9), Cd (9.7), Pb (8.5), Cu (7.4), Ni (6.4), As (4.7), Cr (2.9) and Fe (2.4) in nest material, and Co (32.7), Cd (6.3), Pb (6), Fe (2.8), Ni (2.9) and Zn (2.1) in ants. In industrial and reference areas, ants have no differences in size, but differed in dry and residual body mass. In polluted areas, F. lugubris had less melanised heads, but not thoraxes. The sensitivity of cuticular colouration in red wood ants subjected to heavy metal pollution might be related to metal-binding properties of melanins. The overall results are useful for the improvement of biomonitoring techniques using ants as indicators of industrial contamination and for further discovery of novel ecotoxicological biomarkers.

Heavy metal pollution of water sources has raised global environmental sustainability concerns, calling for the development of high-performance materials for effective pollution treatment. Herein, we report a facile approach to synthesize carbonaceous nanofiber/NiAl layered double hydroxide (CNF/LDH) nanocomposites for high-efficiency elimination of heavy metals from aqueous solutions. The CNF/LDH nanocomposites were characterized by three-dimensional architectures formed by the gradual self-assembly of flower-like LDH on CNF. The nanocomposites exhibited excellent hydrophilicity and high structural stability in aqueous solutions, guaranteeing the high availability of active sites in these environments. High-efficiency elimination of heavy metal ions by the CNF/LDH nanocomposites was demonstrated by the high uptake capacities of Cu(II) (219.6 mg/g) and Cr(VI) (341.2 mg/g). The sorption isotherms coincided with the Freundlich model, most likely because of the presence of heterogeneous binding sites. The dominant interaction mechanisms consisted of surface complexation and electrostatic interaction, as verified by a combination of X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy analyses and density functional theory calculations. The results presented herein confirm the importance of CNF/LDH nanocomposites as emerging and promising materials for the efficient removal of heavy metal ions and other environmental pollutants.