Many organic materials have been used to decrease heavy-metal bioavailability in soil via in-situ remediation due to its high efficiency and easy operation; meanwhile, cheap materials have also been pursued to decrease the cost of remediation. Agricultural wastes exhibit their potential in remediation materials due to their low cost; however, raw agricultural wastes have a low ability to immobilize heavy metals in soil. Attempts have been made to modify agricultural wastes to improve the efficiency of heavy-metal passivation. In this study, novel agricultural waste-based materials, raw sugarcane bagasse (SB), citric acid modified (SSB) and citric-acid/Fe₃O₄ modified (MSB) sugarcane bagasse at 0.5% and 1% addition rates, were compared for their effectiveness in soil Cd passivation and Cd accumulations in pakchoi plants in a 30-day pot experiment. The addition of SB did not decrease soil bioavailable Cd effectively and slightly decreased Cd accumulation in plant roots and leaves. In comparison, SSB and MSB exhibited a great potential to decrease the transformation, translocation and accumulation of Cd with the decrease being greater at 1% than 0.5% rate in the soil-pakchoi system. For example, the addition of SSB and MSB at 0.5% decreased the concentration of Cd in leaves by 10%, and 16%, and at 1% decreased the concentration by 25% and 30%, respectively. High pH and abundant functional groups of three amendments played important roles in Cd immobilization. The enhanced microbial activities might also contribute to Cd passivation. However, plant growth was decreased in the amended treatments except SSB at 0.5% rate. The results suggest that citric-acid-modified sugarcane bagasse at addition rate of 0.5% has a potential to immobilize Cd in soil and decrease Cd accumulation in edible part of pakchoi effectively without decreasing vegetable growth.

Copper has become one of the most important heavy metal pollutants in the environment because of its wide application and high toxicity, but research on water quality criteria (WQCs) on copper is limited, especially the derivation of seawater WQC. In addition, the toxicity of copper in the seawater system is affected by various environmental factors. Therefore, establishing a WQC that meets the characteristics of the regional environment is a top priority. The correlations between four factors of temperature, salinity, pH, dissolved organic carbon (DOC) and the toxic effect values of copper were analyzed in this study, and the temperature was determined as the most influential factor among the four factors in the Bohai Sea. A specific correlation between temperature and the toxic effects of copper was identified, and WQCs were derived based on the identified correlation and the variations of the Bohai Sea's temperature in different seasons by species sensitivity distribution (SSD) method. Under the condition of the winter, spring, autumn, and summer with an average water temperature of 0.09, 15.96, 17.83, and 24.87 °C, the obtained short-term water quality criteria (SWQCs) were 44.29, 4.70, 4.31, and 3.33 μg/L; the long-term water quality criteria (LWQCs) were 18.14, 1.93, 1.77 and 1.36 μg/L. The findings indicated the importance of introducing specific environmental conditions during the derivation process. This work could provide valuable information for pollution prevention and aquatic life protection in the Bohai Sea and provide a valuable reference for the derivation of criteria in other regions alike.

The composition of root exudates is modulated by several environmental factors, and it remains unclear how that affects beneficial rhizosphere or inoculated microorganisms under heavy metal (HM) contamination. Therefore, we evaluated the transcriptional response of Pseudomonas putida E36 (a Miscanthus x giganteus isolate with plant growth promotion-related properties) to Cd, Pb and Zn in an in vitro study implementing root exudates from M. x giganteus. To collect root exudates and analyse their composition plants were grown in a pot experiment under HM and control conditions. Our results indicated higher exudation rate for plants challenged with HM. Further, out of 29 organic acids identified and quantified in the root exudates, 8 of them were significantly influenced by HM (e.g., salicylic and terephthalic acid). The transcriptional response of P. putida E36 was significantly affected by the HM addition to the growth medium, increasing the expression of several efflux pumps and stress response-related functional units. The additional supplementation of the growth medium with root exudates from HM-challenged plants resulted in a downregulation of 29% of the functional units upregulated in P. putida E36 as a result of HM addition to the growth medium. Surprisingly, root exudates + HM downregulated the expression of P. putida E36 functional units related to plant colonization (e.g., chemotaxis, motility, biofilm formation) but upregulated its antibiotic and biocide resistance compared to the control treatment without HM. Our findings suggest that HM-induced changes in root exudation pattern may attract beneficial bacteria that are in turn awarded with organic nutrients, helping them cope with HM stress. However, it might affect the ability of these bacteria to colonize plants growing in HM polluted areas. Those findings may offer an insight for future in vivo studies contributing to improvements in phytoremediation measures.

The weathering and contaminant transport behavior of both primary (PMPs) and secondary microplastics (SMPs) are interrelated to their original physiochemical features and variations within the environment. This study examines the influence of PMPs' intrinsic characteristics (polymer structure and crystallinity) and SMPs' extrinsic features (surface oxidation and external sediments attachment) on the photodegradation kinetics, and subsequently Pb(II) and Zn(II) uptake from stormwater. For this purpose, high density polyethylene (HDPE) and low density polyethylene (LDPE) with different degrees of crystallinities were produced as PMPs, and their photodegradation behaviors were compared with original polymers. Furthermore, the SMPs generated by abrasion and surface oxidation of PMPs and the virgin PMPs underwent accelerated photodegradation, and the changes of their crystallinity, surface chemistry, and morphology were examined. Scanning electron microscopy (SEM) imaging and X-ray photoelectron (XPS) studies revealed the formation of cracks and different oxidized functionalities on MPs surface due to UV photodegradation. The vinyl and carbonyl indices calculated using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy demonstrated an elevated photodegradation rate for SMPs compared to the PMPs. Moreover, the Differential Scanning Colorimetry (DSC) demonstrated an increasing percentage of crystallinity in all MPs due to the photodegradation. The percent crystallinity of HDPE pellets increased after photodegradation from 49.8 to 62.6 and it increased from 17.2 to 38.9 for LDPE pellets respectively. The greater level of increase in crystallinity for LDPE in comparison to HDPE upon photodegradation was referred to as LDPE's greater amorphous content and branched structure. A greater level of metal uptake was obtained for photodegraded LDPE pellets as 2526 μg/m² for Pb(II) and 2028 μg/m² for Zn(II) respectively.

Globally distributed karstic soils are characterized by the high accumulation of heavy metal(loid)s, such as Cd. Biogeochemistries and transferability of metal(loid)s in such soils are notably different from that in soils of anthropogenic pollution as evidenced by increasing studies about rice and maize. To solve the question about metal(loid) background and transferability in the system of karstic soils and crops with underground fruits, we designedly collected 246 paired soil–peanut seed samples in a world-famous karstic region in Southwestern China covering an area of 98,700 km². The concentrations of eight regulatory metal(loid)s (Cd, As, Cr, Cu, Hg, Ni, Pb, and Zn) in soil samples exceeded current standards to different degrees, demonstrating a typical high background. However, the transferability of metal(loid)s from soils to peanut seeds is quite low, resulting in a low exceedance rate of metal(loid)s (Cd, 12.2% and Pb, 1.2%) in seeds (“seed metal(loid)s”), in accordance with the results that metal(loid)s in soils mostly distributed in the inert/residual fractions. Based on the distinct response characteristics of peanut seed metal(loid)s to soil status from rice/maize grain metals, a model was further developed for effectively predicting the concentration of Cd in peanut seeds. Collectively, this study provides a basis for the assessment of soil environmental quality and safety zoning of upland field in karst areas.

In acidic medium, hazardous heavy metals of lead-zinc tailing (LZT) are easily leachable and mobilizable. Thus, the hazard, amount, form, and complexity of the leached heavy metals under acidic precipitation become a major environmental concern. This work investigates the gangue minerals, toxicity, speciation, leaching characteristics of heavy metals in LZT under simulated acid rain, as well as immobilization effects and mechanisms using a sustainable binder. In LZT, dolomite, quartz, calcite, and muscovite are the main gangue minerals, tiny hazardous metallic minerals were absorbed in the surface. The results revealed that Pb, Zn, Cr, and Cd were the predominant harmful elements, particularly Pb and Zn. Zn is leached completely and is the concerned hazardous element under simulated acid rain. In the acid rain neutralization ability test, the amount of leachable Pb, Cr, Ca, and Si maintained in equilibrium, leached Zn, Cd, Al, and Mg depended on the addition of acid. Pb and Ca were sedimented in residues. Immobilization of Pb, Zn, Cr, and Cd depended on the stability of Ca(OH)₂/C–S–H of hydrates, and 70% LZTHP after curing 7 days can be used for some practical engineering projects. This work opens up deeply understandings for the leached heavy metals under acidic precipitation and improves the sustainable and safe in the field of immobilization of heavy metals.

GABA, a four-carbon non-protein amino acid, plays an important role in animals and plants. We previously found GABA could alleviate alkali stress in apple seedlings. However, its physiological mechanism under heavy metal cadmium (Cd) stress need to be further studied. Thus, we explored its biological role in response to Cd stress. It was verified that 0.5 mM GABA could effectively alleviate Cd toxicity. Using NMT technique, we found that exogenous GABA could significantly reduce the net Cd²⁺ fluxes in apple roots, and Cd content was significantly lower than that in roots under Cd stress. Further analysis indicated exogenous GABA could significantly reduce the expression of genes related to the uptake and transport of Cd in apples under Cd stress. In addition, exogenous GABA could significantly increase the content of amino acids in apple roots under Cd stress. GAD is a key enzyme in GABA synthesis, we obtained transgenic apple roots of overexpression MdGAD1. Compared with the control, transgenic roots accumulated less Cd, maintained lower Cd uptake by roots, and lower expression of related transport genes. These results showed that GABA could effectively alleviate Cd toxicity in apple seedlings and provide a new perspective of GABA to alleviate Cd stress.

The negative impact of microplastics (MPs) act as metals vectors to environment and ecosystem have been paid more and more attention, and the accumulation risk of them to human body through the food chains and food webs needs to attract attention. In addition, the MPs bonded with heavy metals transport from river into the sea with high salinity may also have metals release risk. Herein, natural aged microplastics prepared from artificially broken macroplastics adsorbed with heavy metals accumulated from the natural environment were tested for their states and release risk in several simulated solution (NaCl and gastrointestinal solutions) to understand their effects on environment and human health. The adsorption capacity of different heavy metals on MPs was different during natural aging process proved by four-acid digestion method. Metals with high accumulation (including Pb, As, Cr, Mn, Ni, Zn, Co, Cu and Cd) on NAMPs were selected for further study. Results obtained via three-step extraction method showed that these heavy metals were mainly present as acid-extractable and reducible ions, which were characterized by high bioavailability. Release experiments suggested the notable Mn, Zn, As, Cr, Cu and Ni release in NaCl solution, and significant release of Mn, Zn, As, Cr, Cu, Pb and Ni in gastrointestinal solutions. The high metal release ratio in the simulated gastric solution was attributed to the weak binding of metal ions to NAMPs in acidic environment. This study will play a vital rule in assessing the ecological risks associated with MPs in natural environment.

The presence of heavy metals in municipal solid waste (MSW) is considered as prevalent global pollutants that cause serious risks to the environment and living organisms. Due to industrial and anthropogenic activities, the accumulation of heavy metals in the environmental matrices is increasing alarmingly. MSW causes several adverse environmental impacts, including greenhouse gas (GHG) emissions, river plastic accumulation, and other environmental pollution. Indigenous microorganisms (Pseudomonas, Flavobacterium, Bacillus, Nitrosomonas, etc.) with the help of new pathways and metabolic channels can offer the potential approaches for the treatment of pollutants. Microorganisms, that exhibit the ability of bioaccumulation and sequestration of metal ions in their intracellular spaces, can be utilized further for the cellular processes like enzyme signaling, catalysis, stabilizing charges on biomolecules, etc. Microbiological techniques for the treatment and remediation of heavy metals provide a new prospects for MSW management. This review provides the key insights on profiling of heavy metals in MSW, tolerance of microorganisms, and application of indigenous microorganisms in bioremediation. The literatures revealed that indigenous microbes can be exploited as potential agents for bioremediation.

Plastic film mulching and use of wastewaters for irrigation have been common agricultural practices for over half a century in Tunisia, especially in arid regions, resulting in the undesired creation of a pathway for microplastics (MPs) to enter farmland soil. In order to assess the extent and characteristics of soil contamination by MPs in the Moknine province, an area of intensive agricultural practices, 16 farmland soil samples were collected and characterized. The total concentration of targeted MPs was 50–880 items/kg; among them, the most common MPs type being polypropylene (PP), mainly occurring as white/transparent fibers with small size (cross section <0.3 mm). SEM images of MPs surfaces revealed multiple features related to environmental exposure and degradation. ATR-FTIR spectroscopy and pyrolysis-GC/MS analyses enabled the accurate identification of MPs separated from the embedding soil micro- and macro-aggregates. Finally, contamination of the polymeric microparticles with a broad range of metals was found by ICP-MS analysis, suggesting that MPs can be vectors for transporting heavy metals in the soil and indicators of soil contamination as a result of mismanagement of industrial wastewaters.