Refine search
Results 1-10 of 124
Effects of plant additives on the concentration of sulfur and nitrogen oxides in the combustion products of coal-water slurries containing petrochemicals
2020
Nyashina, G.S. | Kuznetsov, G.V. | Strizhak, P.A.
The active use of solid fossil fuels (coal) in the production of heat and electricity has led to significant pollution, climate change, environmental degradation, and an increase in morbidity and mortality. Many countries (in particular, European ones, China, Japan, the USA, Canada, etc.) have launched programs for using plant and agricultural raw materials to produce heat and electricity by burning them instead of or together with traditional fuels. It is a promising solution to produce slurry fuels, based on a mixture of coal processing, oil refining and agricultural waste. This paper presents the results of experimental research into the formation and assessment of the most hazardous emissions (sulfur and nitrogen oxides) from the combustion of promising coal slurry fuels with straw, sunflower and algae additives, i.e. the most common agricultural waste. A comparative analysis has been carried out to identify the differences in the concentrations of sulfur and nitrogen oxides from the combustion of typical coal, coal processing waste, as well as fuel slurries with and without plant additives. It has been shown that the concentration of sulfur and nitrogen oxides can be reduced by 62–87% and 12–57%, respectively, when using small masses of plant additives (no more than 10 wt%) and maintaining high combustion heat of the slurry fuel. However, the use of algae and straw in the slurry composition can increase the HCl emissions, which requires extra measures to fight corrosion. A generalizing criterion of slurry fuel vs. coal efficiency has been formulated to illustrate significant benefits of adding plant solid waste to coal-water slurries containing petrochemicals. Straw and sunflower waste (10 wt%) were found to be the best additives to reduce the air pollutant emissions.
Show more [+] Less [-]Mild acid and alkali treated clay minerals enhance bioremediation of polycyclic aromatic hydrocarbons in long-term contaminated soil: A 14C-tracer study
2017
Biswas, Bhabananda | Sarkar, Binoy | Rusmin, Ruhaida | Naidu, R.
Bioremediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils requires a higher microbial viability and an increased PAH bioavailability. The clay/modified clay-modulated bacterial degradation could deliver a more efficient removal of PAHs in soils depending on the bioavailability of the compounds. In this study, we modified clay minerals (smectite and palygorskite) with mild acid (HCl) and alkali (NaOH) treatments (0.5–3 M), which increased the surface area and pore volume of the products, and removed the impurities without collapsing the crystalline structure of clay minerals. In soil incubation studies, supplements with the clay products increased bacterial growth in the order: 0.5 M HCl ≥ unmodified ≥0.5 M NaOH ≥3 M NaOH ≥3 M HCl for smectite, and 0.5 M HCl ≥3 M NaOH ≥0.5 M NaOH ≥3 M HCl ≥ unmodified for palygorskite. A14C-tracing study showed that the mild acid/alkali-treated clay products increased the PAH biodegradation (5–8%) in the order of 0.5 M HCl ≥ unmodified > 3 M NaOH ≥ 0.5 M NaOH for smectite, and 0.5 M HCl > 0.5 M NaOH ≥ unmodified ≥ 3 M NaOH for palygorskite. The biodegradation was correlated (r = 0.81) with the bioavailable fraction of PAHs and microbial growth as affected particularly by the 0.5 M HCl and 0.5 M NaOH-treated clay minerals. These results could be pivotal in developing a clay-modulated bioremediation technology for cleaning up PAH-contaminated soils and sediments in the field.
Show more [+] Less [-]Life cycle assessment of environmental impacts associated with oxidative desulfurization of diesel fuels catalyzed by metal-free reduced graphene oxide
2021
Lin, Shichun | Ng, Sue-Faye | Ong, Wee-Jun
This study aimed to analyze the environmental impacts of the oxidative desulfurization (ODS) process catalyzed by metal-free reduced graphene oxide (rGO) through life cycle assessment (LCA). The environmental impacts study containing the rGO production process, the ODS process, the comparison of different oxidants and solvents was developed. This study was performed by using ReCiPe 2016 V1.03 Hierarchist midpoint as well as endpoint approach and SimaPro software. For the production of 1 kg rGO, the results showed that hydrochloric acid (washing), sulfuric acid (mixing), hydrazine (reduction) and electricity were four main contributors in this process, and this process showed a significant impact on human health 14.21 Pt followed by ecosystem 0.845 Pt and resources 0.164 Pt. For the production of 1 kg desulfurized oil (400 ppm), main environmental impacts were terrestrial ecotoxicity (43.256 kg 1,4-DCB), global warming (41.058 kg CO₂), human non-carcinogenic toxicity (19.570 kg 1,4-DCB) and fossil resource scarcity (13.178 kg oil), and the main contributors were electricity, diesel oil and acetonitrile. The whole ODS process also showed a greatest effect on human health. For two common oxidants hydrogen peroxide and oxygen used in ODS, hydrogen peroxide showed a greater impact than oxygen. On the other hand, for three common solvents employed in ODS, N-methyl-2-pyrrolidone had a more serious impact on human health followed by acetonitrile and N,N-dimethylformamide. As such, LCA results demonstrated the detailed environmental impacts originated from the catalytic ODS, hence elucidating systematic guidance for its future development toward practicality.
Show more [+] Less [-]The potential role of sediment organic phosphorus in algal growth in a low nutrient lake
2019
Ni, Zhaokui | Wang, Shengrui | Cai, Jingjing | Li, Hong | Jenkins, Alan | Maberly, Stephen C. | May, Linda
The role of sediment–bound organic phosphorus (Pₒ) as an additional nutrient source is a component of internal P budgets in lake system that is usually neglected. Here we examined the relative importance of sediment Pₒ to internal P load and the role of bioavailable Pₒ in algal growth in Lake Erhai, China. Lake Erhai sediment extractable Pₒ accounted for 11–43% (27% average) of extractable total P, and bioavailable Pₒ accounted for 21–66% (40%) of Pₒ. The massive storage of bioavailable Pₒ represents an important form of available P, essential to internal loads. The bioavailable Pₒ includes mainnly labile monoester P and diester P was identified in the sequential extractions by H₂O, NaHCO₃, NaOH, and HCl. 40% of H₂O−Pₒ, 39% of NaHCO₃−Pₒ, 43% of NaOH−Pₒ, and 56% of HCl−Pₒ can be hydrolyzed to labile monoester and diester P, suggesting that the bioavailability of Pₒ fractions was in decreasing order as follows: HCl−Pₒ > NaOH−Pₒ > H₂O−Pₒ > NaHCO₃−Pₒ. It is implied that traditional sequential fractionation of Pₒ might overestimate the availability of labile Pₒ in sediments. Furthermore, analysis of the environmental processes of bioavailable Pₒ showed that the stabler structure of dissloved organic matter (DOM) alleviated the degradation and release of diester P, abundant alkaline phosphatase due to higher algal biomass promoted the degradation of diester P. The stability of DOM structure and the degradation of diester P might responsible for the spatial differences of labile monoester P. The biogeochemical cycle of bioavailable Pₒ replenishs available P pools in overlying water and further facilitate algal growth during the algal blooms. Therefore, to control the algal blooms in Lake Erhai, an effective action is urgently required to reduce the accumulation of Pₒ in sediments and interrupt the supply cycle of bioavailable Pₒ to algal growth.
Show more [+] Less [-]Evaluation of chemical extractants to assess metals phytoavailability in Brazilian municipal solid waste composts
2018
Asensio, Verónica | Abreu-Junior, Cassio H. | Silva, Fábio Cesar da | Chitolina, José Carlos
Municipal solid wastes (MSW) can be composted to become an organic fertilizer. However, besides plant nutrients, it can also contain high concentration of some toxic metals than can pollute agricultural soils, contaminate food, animals and human being. A greenhouse experiment was carried out for two purposes: i) to evaluate the concentrations of cadmium, copper, chromium, nickel, lead and zinc in four Brazilian MSW composts, and, ii) to know which is the best solution for extracting those metals in phytoavailable form from the composts. In order to evaluate the phytoavailability of metals, they were extracted with six chemical extractants: i) water, ii) 0.05 mol L⁻¹ Ca(NO₃)₂, iii) 0.1 mol L⁻¹ HCl, iv) 0.005 mol L⁻¹ DTPA at pH 7.3, v) 0.05 mol L⁻¹ CaCl₂ and vi) Mehlich 3 solution. In addition, lettuces were cultivated as a test plant in pots containing 1.8 kg of MSW compost as substrate. Fifty-six days later, lettuce plants were harvested. New lettuces were then planted for a second cycle, and then harvested after fifty-six days. Semi-total concentration of metals in composts and total in plants was also determined through an extraction with nitric-perchloric acid. Semi–total concentration of Cd and Pb exceeded the intervention limits from Brazil in the four studied composts, and lettuce plants were polluted by those two elements. Therefore, compost made of MSW must be characterized before being used for agricultural soils. Copper and nickel in phytoavailable were effectively extracted with the strongest chelating agents used, HCl and Mehlich 3, probably because most metal is bound to organic matter in the compost. Cadmium, chromium, lead and zinc were no efficiently extracted with any of the tested extractants.
Show more [+] Less [-]Ferric-enhanced chemical remediation of dredged marine sediment contaminated by metals and petroleum hydrocarbons
2018
Yoo, Jongchan | Jeon, Pilyong | Tsang, Daniel C.W. | Kwon, Eilhann E. | Baek, Kitae
Sediments nearby harbors are dredged regularly, and the sediments require the stringent treatment to meet the regulations on reuse and mitigate the environmental burdens from toxic pollutants. In this study, FeCl₃ was chosen as an extraction agent to treat marine sediment co-contaminated with Cu, Zn, and total petroleum hydrocarbons (TPH). In chemical extraction process, the extraction efficiency of Cu and Zn by FeCl₃ was compared with the conventional one using inorganic acids (H₂SO₄ and HCl). Despite the satisfactory level for extraction of Cu (78.8%) and Zn (73.3%) by HCl (0.5 M) through proton-enhanced dissolution, one critical demerit, particularly acidified sediment, led to the unwanted loss of Al, Fe, and Mg by dissolution. Moreover, the vast amount of HCl required the huge amounts of neutralizing agents for the post-treatment of the sediment sample via the washing process. Despite a low concentration, extraction of Cu (70.1%) and Zn (69.4%) was done by using FeCl₃ (0.05 M) through proton-enhanced dissolution, ferric-organic matter complexation, and oxidative dissolution of sulfide minerals. Ferric iron (Fe³⁺) was reduced to ferrous iron (Fe²⁺) with sulfide (S²⁻) oxidation during FeCl₃ extraction. In consecutive chemical oxidations using hydrogen peroxide (H₂O₂) and persulfate (S₂O₈²⁻), the resultant ferrous iron was used to activate the oxidants to effectively degrade TPH. S₂O₈²⁻ using FeCl₃ solution (molar ratio of ferrous to S₂O₈²⁻ is 19.8–198.3) removed 42.6% of TPH, which was higher than that by H₂O₂ (molar ratio of ferrous to H₂O₂ is 1.2–6.1). All experimental findings suggest that ferric is effectively accommodated to an acid washing step for co-contaminated marine sediments, which leads to enhanced extraction, cost-effectiveness, and less environmental burden.
Show more [+] Less [-]Sorption mechanisms of sulfamethazine to soil humin and its subfractions after sequential treatments
2016
Guo, Xiaoying | Shen, Xiaofang | Zhang, Meng | Zhang, Haiyun | Chen, Weixiao | Wang, Hui | Koelmans, A.A. | Cornelissen, Gerard | Tao, Shu | Wang, Xilong
Sorption mechanisms of an antibiotic sulfamethazine (SMT) to humin (HM) isolated from a peat soil and its subfractions after sequential treatments were examined. The treatments of HM included removal of ash, O-alkyl carbon, lipid, and lignin components. The HF/HCl de-ashing treatment removed a large amount of minerals (mainly silicates), releasing a fraction of hydrophobic carbon sorption domains that previously were blocked, increasing the sorption of SMT by 33.3%. The de-O-alkyl carbon treatment through acid hydrolysis greatly reduced polarity of HM samples, thus weakening the interaction between sorbents with water at the interfaces via H-bonding, leaving more effective sorption sites. Sorption of SMT via mechanisms such as van der Waals forces and π-π interactions was enhanced by factors of 2.04–2.50. After removing the lipid/lignin component with the improved Soxhlet extraction/acid hydrolysis, the organic carbon content-normalized sorption enhancement index Eoc was calculated. The results demonstrated that the Eoc-lipid for SMT (16.9%) was higher than Eoc-lignin (10.1%), implying that removal of unit organic carbon mass of lipid led to a higher increase in sorption strength than that of lignin. As each component was progressively removed from HM, the sorption strength and isotherm nonlinearity of the residual HM samples for SMT were gradually enhanced. The Koc values of SMT by HM samples were positively correlated with their aromatic carbon contents, implying that π-π electron donor-acceptor interactions between the benzene ring of sorbate and the aromatic domains in HM played a significant role in their interactions.
Show more [+] Less [-]Impacts of chlorine chemistry and anthropogenic emissions on secondary pollutants in the Yangtze river delta region
2021
Li, Jingyi | Zhang, Na | Wang, Peng | Choi, Minsu | Ying, Qi | Guo, Song | Lu, Keding | Qiu, Xionghui | Wang, Shuxiao | Hu, Min | Zhang, Yuanhang | Hu, Jianlin
Multiphase chemistry of chlorine is coupled into a 3D regional air quality model (CMAQv5.0.1) to investigate the impacts on the atmospheric oxidation capacity, ozone (O₃), as well as fine particulate matter (PM₂.₅) and its major components over the Yangtze River Delta (YRD) region. The developed model has significantly improved the simulated hydrochloric acid (HCl), particulate chloride (PCl), and hydroxyl (OH) and hydroperoxyl (HO₂) radicals. O₃ is enhanced in the high chlorine emission regions by up to 4% and depleted in the rest of the region. PM₂.₅ is enhanced by 2–6%, mostly due to the increases in PCl, ammonium, organic aerosols, and sulfate. Nitrate exhibits inhomogeneous variations, by up to 8% increase in Shanghai and 2–5% decrease in most of the domain. Radicals show different responses to the inclusion of the multiphase chlorine chemistry during the daytime and nighttime. Both OH and HO₂ are increased throughout the day, while nitrate radicals (NO₃) and organic peroxy radicals (RO₂) show an opposite pattern during the daytime and nighttime. Higher HCl and PCl emissions can further enhance the atmospheric oxidation capacity, O₃, and PM₂.₅. Therefore, the anthropogenic chlorine emission inventory must be carefully evaluated and constrained.
Show more [+] Less [-]Sediment quality guidelines for copper and zinc for filter-feeding estuarine oysters?
2011
Birch, G.F. | Hogg, T.D.
Sediment quality guidelines (SQGs) assess the ability of bottom sediment to sustain healthy infauna and water quality guidelines (WQGs) provide protection for a designated percentage of aquatic species. Filter-feeding marine species, e.g. oysters and mussels, acquire food from particles in the water column and protection of these animals is not provided by SQGs or WQGs. The current work investigated the relationship between metal (Cu, Zn) concentrations in total and fine-fraction (<62.5μm) surficial sediment digested in a range of acids and chelating agents and oyster tissue metal concentrations. A strong correlation between oyster tissue Cu and Zn concentrations and fine-fraction surficial sediment digested in 1M HCl provided a sedimentary guideline which predicted tissue metal concentrations in oysters and established a level (<45μgg⁻¹ and <1000μgg⁻¹, respectively) for protecting oysters from exceeding human consumption levels (70μgg⁻¹ and 1000μgg⁻¹, respectively).
Show more [+] Less [-]Estimating the extractability of potentially toxic metals in urban soils: A comparison of several extracting solutions
2007
Madrid, F. | Reinoso, R. | Florido, M.C. | Díaz Barrientos, E. | Ajmone-Marsan, F. | Davidson, CM | Madrid, L.
Metals released by the extraction with aqua regia, EDTA, dilute HCl and sequential extraction (SE) by the BCR protocol were studied in urban soils of Sevilla, Torino, and Glasgow. By multivariate analysis, the amounts of Cu, Pb and Zn liberated by any method were statistically associated with one another, whereas other metals were not. The mean amounts of all metals extracted by HCl and by SE were well correlated, but SE was clearly underestimated by HCl. Individual data for Cu, Pb and Zn by both methods were correlated only if each city was considered separately. Other metals gave poorer relationships. Similar conclusions were reached comparing EDTA and HCl, with much lower values for EDTA. Dilute HCl extraction cannot thus be recommended for general use as alternative to BCR SE in urban soils. Dilute HCl extraction is tested as an alternative to the BCR sequential extraction in urban soils.
Show more [+] Less [-]