The level of phthalate esters (PAEs) alone is not considered to be a sufficient indicator of PAE pollution due to the quick metabolism of PAEs in the biota. The primary metabolites of PAEs, monoalkyl phthalate esters (MPEs), may also be an important indicator. However, PAE metabolism has scarcely been documented in wild marine organisms. We analysed five PAEs [dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), di(2-ethylhexyl) phthalate (DEHP), and di-n-octyl phthalate (DNOP)] and their corresponding MPEs [mono-methyl phthalate (MMP), mono-ethyl phthalate (MEP), mono-n-butyl phthalate (MBP), mono-2-ethylhexyl phthalate (MEHP), and mono-n-octyl phthalate (MNOP)] in 95 wild aquatic marine samples (including fish, prawns and molluscs) collected from the Yangtze River Delta area of the East China Sea. The species-dependent distribution of these compounds was associated with the food habits, living patterns and trophic levels of the biota. Slightly higher levels of hydrophobic PAEs (DBP and DEHP, logKOW 4.27 and 7.33, respectively) were observed in fish species consuming benthic organisms or in demersal fish species, suggesting the importance of benthic organisms and sediment. Trophic dilution of both PAEs and MPEs implies further metabolic transformation at higher trophic levels. MPE tissue distributions in fish demonstrate that the highest concentrations were always observed in bile. Metabolism via the kidney and gill is a probable main way for the relatively less hydrophobic MPEs (logKOW = <4.73, from MMP to MEHP), whereas metabolism via the liver is likely the main way for the most hydrophobic MNOP (logKOW 5.22). Generally, higher detection frequencies of MPEs were observed than those of parent PAEs. Significant liner correlations were observed between the levels of short-branched (carbon atom per chain = <4) MPEs and the sum of PAEs and MPEs (n = 95, p < 0.01), demonstrating that short-branched MPEs can be used as biomarkers of exposure to quantitatively reflect parent PAE contamination in wild marine organisms.

The shift from rural lifestyles to urban living has dramatically altered the way humans interact and live across the globe. With over 50% of the world’s populations living within cities, and significant increases expected over the next 50 years, it is critical that changes to social, economic and environmental sustainability of cities globally be implicit. Protecting and enhancing aquatic ecosystems, which provide important ecosystem services, is challenging. A number of factors influence pollutants in urban waterways including changes in land-use, impervious area and stormwater discharges, with sediment-bound pollution a major issue worldwide. This work aimed to investigate the spatial and temporal distribution of trace metals in freshwater sediments from six urbanised catchment over a 30-year period. It provides an estimate of pollution using a geoaccumulation index and examines possible toxicity using a probable effect concentration quotient (mPECq). Results showed significant temporal changes in metal concentrations over time, with lead generally decreasing in all but one of the sites, attributed to significant changes in environmental policies and the active elimination of lead products. Temporal changes in other metals were variable and likely dependent on site-specific factors. While it is likely that diffuse pollution is driving changes in zinc, for metals such as lead, chromium and copper, it is likely that watershed landuse and/or point sources are more important. The results clearly indicated that changes to watershed landuse, environmental policy and pollution abatement programs are all driving changes in sediment quality, highlighting the utility of long-term sediment monitoring for assessment of urban watershed condition. While this study has demonstrated the utility of detecting long-term changes in metal concentrations, this approach could easily be adapted to detect and assess future trends in other hydrophobic contaminants and emerging chemicals of concern, such as synthetic pyrethroids, providing essential information for the protection of catchment.

Ingestion of soot present in soil or other environmental particles is expected to be an important route of exposure to nitro and oxygenated derivatives of polycyclic aromatic hydrocarbons (PAHs). We measured the apparent bioaccessibility (Bapp) of native concentrations of 1-nitropyrene (1N-PYR), 9-fluorenone (9FLO), anthracene-9,10-dione (ATQ), benzo[a]anthracene-7,12-dione (BaAQ), and benzanthrone (BZO) in a composite fuel soot sample using a previously-developed in vitro human gastrointestinal model that includes silicone sheet as a third-phase absorptive sink. Along with Bapp, we determined the 24-h sheet-digestive fluid partition coefficient (Ks,24h), the soot residue-fluid distribution ratio of the labile sorbed fraction after digestion (Kr,lab), and the maximum possible (limiting) bioaccessibility, Blim. The Bapp of PAH derivatives was positively affected by the presence of the sheet due to mass-action removal of the sorbed compounds. In all cases Bapp increased with imposition of fed conditions. The enhancement of Bapp under fed conditions is due to increasingly favorable mass transfer of target compounds from soot to fluid (increasing bile acid concentration, or adding food lipids) or transfer from fluid to sheet (by raising small intestinal pH). Food lipids may also enhance Bapp by mobilizing contaminants from nonlabile to labile states of the soot. Compared to the parent PAH, the derivatives had larger Kr,lab, despite having lower partition coefficients to various hydrophobic reference phases including silicone sheet. The Blim of the derivatives under the default conditions of the model ranged from 65.5% to 34.4%, in the order, 1N-PYR > ATQ > 9FLO > BZO > BaAQ, with no significant correlation with hydrophobic parameters, nor consistent relationship with Blim of the parent PAH. Consistent with earlier experiments on a wider range of PAHs, the results suggest that a major determinant of bioaccessibility is the distribution of chemical between nonlabile and labile states in the original solid.

It has been hypothesised that, if ingested, plastic debris could act as vector for the transfer of chemical contaminants from seawater to organisms, yet modelling suggest that, in the natural environment, chemical transfer would be negligible compared to other routes of uptake. However, to date, the models have not incorporated consideration of the role of gut surfactants, or the influence of pH or temperature on desorption, whilst experimental work has shown that these factors can enhance desorption of sorbed contaminants several fold. Here, we modelled the transfer of sorbed organic contaminants dichlorodiphenyltrichloroethane (DDT), phenanthrene (Phe) and bis-2-ethylhexyl phthalate (DEHP) from microscopic particles of polyvinylchloride (PVC) and polyethylene (PE) to a benthic invertebrate, a fish and a seabird using a one-compartment model OMEGA (Optimal Modelling for EcotoxicoloGical Applications) with different conditions of pH, temperature and gut surfactants. Environmental concentrations of contaminants at the bottom and the top of published ranges were considered, in combination with ingestion of either 1 or 5% by weight of plastic. For all organisms, the combined intake from food and water was the main route of exposure for Phe, DEHP and DDT with a negligible input from plastic. For the benthic invertebrate, predictions including the presence of contaminated plastic resulted in very small increases in the internal concentrations of DDT and DEHP, while the net change in the transfer of Phe was negligible. While there may be scenarios in which the presence of plastic makes a more important contribution, our modelling study suggests that ingestion of microplastic does not provide a quantitatively important additional pathway for the transfer of adsorbed chemicals from seawater to biota via the gut.

Superfund sites with sediments contaminated by hydrophobic organic compounds (HOCs) can be difficult to characterize because of the complex nature of sorption to sediments. Porewater concentrations, which are often used to model transport of HOCs from the sediment bed into overlying water, benthic organisms, and the larger food web, are traditionally estimated using sediment concentrations and sorption coefficients estimated using equilibrium partitioning (EqP) theory. However, researchers have begun using polymeric samplers to determine porewater concentrations since this method does not require knowledge of the sediment's sorption properties. In this work, polyethylene passive samplers were deployed into sediments in the field (in situ passive sampling) and mixed with sediments in the laboratory (ex situ active sampling) that were contaminated with polychlorinated biphenyls (PCBs). The results show that porewater concentrations based on in situ and ex situ sampling generally agreed within a factor of two, but in situ concentrations were consistently lower than ex situ porewater concentrations. Imprecision arising from in situ passive sampling procedures does not explain this bias suggesting that field processes like bioirrigation may cause the differences observed between in situ and ex situ polymeric samplers.

This study for the first time reported the occurrence, distribution and concentrations of organophosphate esters (OPEs) in soils caused by plastic waste treatment, as well as their influence on OPE accumulation in wheat (Triticum aestivum L.). Eight OPEs were detected with the total concentrations of 38–1250 ng/g dry weight in the soils from the treatment sites, and tributoxyethyl phosphate and tri(2-chloroethyl) phosphate present as the dominant OPEs. There were similar distribution patterns of OPEs and significant correlations between the total OPE concentrations in the soils from the plastic waste treatment sites with those in the nearby farmlands (P < 0.005), indicating that plastic waste treatment caused the OPE contamination of farmland soils. The uptake and translocation of OPEs by wheat were determined, with OPEs of high hydrophobicity more easily taken up from soils and OPEs with low hydrophobicity more liable to be translocated acropetally.

The focus of the present study was to find the relationship between concentrations of bisphenol A (BPA), 4-tert-octylphenol (OP) and 4-nonylphenol (NP) in zooplankton and seasonal changes in the composition and biomass of particular zooplankton taxa in the Gulf of Gdansk (Southern Baltic) in the years 2011–2012. Assays of BPA, OP and NP in water and zooplankton samples were performed using the HPLC/FL system. High mean concentrations of the studied compounds, determined in spring (405.9 (BPA); 25.7 (OP); 111.2 (NP) ng g−1 dw), can be linked to the high proportion of meroplankton in that season. Rotifera also had an influence on the rise in concentrations of the studied compounds but to a lesser degree, while the lowest concentrations (determined in summer) can be associated with the high participation of Copepoda and Cladocera in zooplankton biomass. It was also observed that juvenile forms can be more susceptible to accumulating endocrine disrupting compounds (EDCs). This is indicated by the positive correlation between BPA concentration in zooplankton and the proportion of Copepoda nauplii biomass in spring (r = 0.90; p < 0.05). In most cases, greater zooplankton biomass accumulated higher concentrations and loads of the studied compounds. With biomass growth (to 123.32 μg m−3), the bioconcentration factor also rose (to max 46.1·103), demonstrating that unlike typical hydrophobic compounds the studied EDCs do not become “diluted” in zooplankton biomass. The highest BPA concentrations from all compounds may be connected with anthropogenic sources located in the coastal zone.

Adsorption is an efficient method for removal of pharmaceuticals and personal care products (PPCPs). Magnetic resins are efficient adsorbents for water treatment and exhibit potential for PPCP removal. In this study, the magnetic hypercrosslinked resin Q100 was used for adsorption of PPCPs. The adsorption behavior of this resin was compared with those of two activated carbons, namely, Norit and F400D. Norit exhibited the fastest adsorption kinetics, followed by Q100. Norit featured a honeycomb shape and long-range ordered pore channels, which facilitated the diffusion of PPCPs. Moreover, the large average pore size of Q100 reduced diffusion resistance. The adsorbed amounts of 11 PPCPs on the three adsorbents increased with increasing adsorbate hydrophobicity. For Q100, a significant linear correlation was observed between the adsorption performance for PPCPs and hydrophobicity (logD value) of adsorbates (R2 = 0.8951); as such, PPCPs with high logD values (>1.69) could be efficiently removed. Compared with those of Norit and F400D, the adsorption performance of Q100 was less affected by humic acid because of the dominant hydrophobic interaction. Furthermore, Q100 showed improved regeneration performance, which renders it promising for PPCP removal in practical applications.

Mass transfer of hydrophobic organic contaminants (HOCs) across the air-water interface is an important geochemical process controlling the fate and transport of HOCs at the regional and global scales. However, few studies have characterized concentration or fugacity profiles of HOCs near both sides of the air-water interface, which is the driving force for the inter-compartmental mass transfer of HOCs. Herein, we introduce a novel passive sampling device which is capable of measuring concentration (and therefore fugacity) gradients of HOCs across the air-water interface. Laboratory studies indicated that the escaping fugacity values of polycyclic aromatic hydrocarbons (PAHs) from water to air were negatively correlated to their volatilization half-lives. Results for field deployment were consistent between the passive sampler and an active method, i.e., a combination of grab sampling and liquid-liquid extraction. In general, the fugacity profiles of detected PAHs were indicative of an accumulation mechanism in the surface microlayer of the study regions (Haizhu Lake and Hailing Bay of Guangdong Province, China), while p,p'-DDD tended to volatilize from water to the atmosphere in Hailing Bay. Furthermore, the fugacity profiles of the target analytes increased towards the air-water interface, reflecting the complexity of environmental behavior of the target analytes near the air-water interface. Overall, the passive sampling device provides a novel means to better characterize the air-water diffusive transfer of HOCs, facilitating the understanding of the global cycling of HOCs.

Graphene oxide (GO) and reduced graphene oxide (RGO) materials contain a variety of surface O-functional groups that are chemically reactive. When released into the environment these materials may significantly affect the abiotic transformation of organic contaminants, and therefore, may alter their fate and risks. We found that two GO and five RGO materials that varied in C/O ratio, hydrophobicity, and type/distribution of surface O-functionality all had catalytic effects on the dehydrochlorination of 1,1,2,2-tetrachloroethane (TeCA). Even though the catalytic effects of the materials originated from their deprotonated surface O-functional groups, which served as conjugated bases to catalyze the reaction, the catalytic efficiencies of the materials did not correlate strongly with their surface O contents. The spectroscopic evidence (X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy), surface charge data, and adsorption experiments demonstrated that the catalytic efficiencies of the GO/RGO materials were controlled by a complex interplay of the type and distribution of surface O-functionality, as well as adsorption affinity of the materials. Both Ca2+ and Mg2+ inhibited the catalytic efficiency of the materials by binding to the surface O-functional groups, and consequently, decreasing the basicity of the functional groups. At an environmentally relevant concentration of 10 mg/L, Suwannee River humic acid (used as a model dissolved organic matter) alone had little effect on the dehydrochlorination of TeCA. However, it could inhibit the catalytic efficiency of the GO/RGO materials by coating on their surface and thus, decreasing the adsorption affinity of these materials for TeCA. The findings further underline the potentially important impacts of nanomaterials on contaminant fate and effects in the environment.