The potential for sulfate retention is an important soil feature for buffering of atmospheric acid deposition. We studied the effects of increasing additions of different neutral salts and acids on mobilization and retention of SO₄ ²- in acid forest soils. Soils containing up to 11 mmol SO₄ ²- kg⁻¹ were equilibrated with H₂O, NaCl, MgCl₂, and HCl. Release of SO₄ ²- was highest with H₂O and NaCl additions and lowest when HCl was used. Increasing the ionic strength of the added solutions caused decreasing SO₄ ²- concentrations in equilibrium solution. Decreasing pH in equilibrium solution was found to be the reason for the decrease in release. Even when the pH was < 4, the SO₄ ²- release decreased. We assume that this finding resulted from the fact that in the soils studied the SO₄ ²- sorption was controlled by the high contents of Fe oxides/hydroxides.Experiments with Na₂SO₄, MgSO₄, and H₂SO₄ demonstrated that the B horizons already containing high amounts of SO₄ ²- were still able to retain SO₄ ²-. Sulfate retention increased in the order Na₂SO₄ < MgSO₄ < H₂SO₄, which corresponds to increasing H⁺ availability. The higher SO₄ ²- retention along with MgSO₄ compared to Na₂SO₄ may be caused by higher potential of Mg to mobilize soil acidity compared to Na.

A pilot-plant-scale study of combined sulfur dioxide/nitrogen oxides (SO₂/NOₓ) removal has been performed by the Dravo Lime Company at the Cincinnati Gas and Electric Company's Miami Fort Station in North Bend, Ohio. This study used Dravo's patented Thiosorbic® lime process along with Argonne National Laboratory's (ANL's) patented process for combined SO₂/NOₓ removal using the chelate ferrous·ethylenediaminetetraacetate (Fe·EDTA). For approximately nine months, scrubbing tests were carried out, and waste samples were collected. Waste testing at ANL involved two types of long-term chemical stability experiments. In one test, the gas-phase composition above several different samples was studied by mass spectrometry over 22 months. Unexpectedly, production of carbon dioxide and hydrogen sulfide was observed in some of the samples. The other experiment involved solid-phase leaching. Samples were stored for up to 14 months before leaching. Each leachate was tested for total Kjeldahl nitrogen and for the nitrogen-containing ions nitrite, nitrate, and ammonium. Significant amounts of ammonium ions were found in two of the samples. Total leachable nitrogen was found to stabilize after about the first 7 months of storage.

The results of the first German moss monitoring programme to estimate heavy metal pollution in the Federal Republic of Germany were combined with other large-scale investigations carried out in Germany and then classified geographically in a new form. Using Monte Carlo assisted factor analysis, six factors indicating sources of pollution were identified from the sets of element data from the moss monitoring project (As, Cd, Cr, Cu, Fe, Ni, Pb, Ti, V, Zn) and the data sets for SO₂ and particulate. The geographic distribution patterns of the factor values showed the regions in which the various sources are to be found. By combining the data the primarily anthropogenic chromium concentrations of the mosses were compared with the mainly geogenic chromium concentrations of the stream sediments in the form of examples. After normalization, the transformed chromium concentrations were transferred to a map of the entire area using inverse distance weighting. Anthropogenic and geogenic influences are being discussed on the basis of the results.

Phosphine is a toxic agent and part of the phosphorus cycle. A hitherto unknown formation mechanism for phosphine in the environment was investigated. When iron samples containing iron phosphide were incubated in corrosive aquatic media affected by microbial metabolites, phosphine was liberated and measured by gas chromatography. Iron liberates phosphine especially in anoxic aquatic media under the influence of sulfide and an acidic pH. A phosphine-forming mechanism is suggested: Phosphate, an impurity of iron containing minerals, is reduced abioticly to iron phosphide. When iron is exposed to the environment (e.g. as outdoor equipment, scrap, contamination in iron milled food or as iron meteorites) and corrodes, the iron phosphide present in the iron is suspended in the medium and can hydrolyze to phosphine. Phosphine can accumulate to measurable quantities in anoxic microbial media, accelerating corrosion and preserving the phosphine formed from oxidation.