Dissolved organic matter (DOM) plays a significant role in the photochemical behavior of nano- and micro-plastic particles (NPs/MPs). We investigated the influence of DOM on the mechanism on the photoaging of NPs/MPs with different molecular structures under UV₃₆₅ irradiation in water. DOM components used in this study are mainly humic acid and fulvic acid. The results showed that DOM promoted the weathering of aliphatic NPs/MPs (polypropylene (PP)), but inhibited or had only a minor effect on the photoaging of aromatic NPs/MPs (polystyrene (PS) NPs/MPs, carboxyl-modified PS NPs, amino-modified PS NPs, and polycarbonate MPs). NPs with a large surface area may adsorb sufficient DOM on the particle surfaces through π-π interactions, which competes with NPs for photon absorption sites, thus, can delay the photoaging of PS NPs. Aromatic MPs may release phenolic compounds that quench •OH, thereby weakening the photoaging process. For aliphatic MPs, the detection of peracid, aldehyde, and ketone groups on the polymer surface indicated that DOM promoted weathering of PP MPs, which was primarily because the generation of •OH due to DOM photolysis may attack the polymer by C–C bond cleavage and hydrogen extraction reactions. This study provides insight into the UV irradiation weathering process of NPs/MPs of various compositions and structures, which are globally distributed in water.

Recently, hetero junction materials (p-n-p and n-p-n) have been developed for uplifting the visible light activity to destroy the harmful pollutants in wastewater. This manuscript presents a vivid description of novel n-p-n junction materials namely CeO₂-PPy-ZnO. This novel n-p-n junction was applied as the photocatalyst in drifting the mobility of charge carriers and hence obtaining the better photocatalytic activity when compared with p-n and pure system. Such catalyst's syntheses were successful via the copolymerization method. The structural, morphological and optical characterization techniques were applied to identify the physio-chemical properties of the prepared materials. Additionally, the superior performance of this n-p-n nanostructured material was demonstrated in the destruction of micro organic (chlorophenol) toxic wastes under visible light. The accomplished ability of the prepared catalysts (up to 92% degradation of chlorophenol after 180 min of irradiation) and their profound degradation mechanism was explained in detail.

It is estimated that over 700,000 tons of synthetic dyes are produced annually, 15% of which are emitted as effluents. These highly stable dyes enter the world water ecosystems and stay in the environment, and eventually cause adverse impacts to the environment. Current wastewater treatment methods, such as filtration, coagulation, and chemical oxidation, have sideeffects, including toxic residue formation, membrane fouling, bioaccumulation, and secondary pollutant formation. Given the issues mentioned, it is necessary to study how to improve the degradation of synthetic dye with a cost-effective and ecofriendly approach. Natural oxidation provides a greener option. Recently, Deuteromycetes fungus Myrothecium verrucaria G-1 (M. verrucaria G-1) has shown great potential in producing high level of dye oxidase. This study aims to generate a dye oxidase hyperproducer, 3H6 from M. verrucaria G-1 by using atmospheric and room temperature plasma (ARTP) coupled with ultraviolet (UV) irradiation. This method increases oxidase production by nearly 106.15%. After a simple precipitation and dialysis, this mutant oxidase increases by 1.97-fold in a specific activity with dye degradation rates at 70% for Mmethylene blue (MB) and 85% for Congo red (CR). It is found that the genetic stability of 3H6 remains active for ten generations. The size of oxidase is 65 kDa, and optimum temperature for reaction is 30 °C with 4.5 pH. This study presents that the first combined mutagenesis approach by ARPT-UV on fungus species generates an impressive increment of acid dye oxidases production. As such, this method presents a cost-effective alternative to mitigate hazardous dye pollution.

In the present study, we have successfully formulated a dual heterojunction of g-C₃N₄/BiOCl@MXene-Ti₃C₂ (GCBM) which was found to be highly active in the visible region. GCBM was found to be highly efficient for the degradation of an antibiotic, tetracycline (TC) as compared to the individual constituting units; g-C₃N₄ and BiOCl. Maximum of 97% TC degradation rate was obtained within 90 min of visible light irradiation for initial concentration of 10 mg/L of TC. Optical analysis exhibited that the synthesized heterojunction showed high absorption in the complete spectrum. The reactive species specified by the scavenger study showed the major involvement of •O₂⁻ and •OH radicals. The charge transfer mechanism showed that 2 schemes were majorly involvement in which Z-scheme was formed between g-C₃N₄ and BiOCl and Schottky junction was formed between g-C₃N₄ and Mxene-Ti₃C₂. The formation of Schottky junction helped in inhibiting the back transfer of photogenerated charges and thus, helped in reducing the recombination rate. The synthesized photocatalyst was found to be highly reusable and was studied for consecutive 5 cycles that generalized the high proficiency even after repetitive cycles.

Radioiodine is one of the long-lived fission products and also an important radionuclide released during nuclear accidents, which generates interest in its environmental fate. Its sorption has been studied in a wide range of materials, but no equivalent study exists for microplastics, an emerging environmental vector. Weathering and biofilm formation on microplastics can enhance radioiodine sorption. For the first time, we're reporting how radioiodine interacts with different types of polyethylene derived microplastics (pristine, irradiated, and biofilm developed microplastics). This study revealed that exposure to radiation and the marine environment significantly alters the physico-chemical properties of microplastics. In particular, in marine-exposed samples, a signature of biofilm development was detected. Speciation study indicates that iodine exists in the iodide form in the studied marine environment. The study revealed that, iodide ions attach to biofilm-developed microplastics via electrostatic, ion-dipole, pore filling, and van der Waals interactions. Pore filling, ion-dipole, and van der Waals interactions may cause iodide binding to irradiated microplastics, whereas pore-filling and van der Waals interactions cause iodide binding to pristine microplastics. The distribution coefficient (Kd) of iodine on microplastics is positively correlated with biofilm biomass, which signifies the role of biofilm in radioiodine uptake. The Kd indicates microplastics are potential iodide accumulators and could be a possible vector in the marine system.

Catalytic pyrolysis is a promising chemical recycling technology to supplement mechanical recycling since plastics can be broken down into monomers or converted to the required fuels and chemicals. In this study, a microwave (MW) -responsive SiC foam@zeoltie core-shell structured catalyst was proposed for the catalytic pyrolysis of polyolefins. Under microwave irradiation, the SiC foam core works as both microwave adsorber and catalyst support, thus concentrating the generated heat energy on the ZSM-5 zeolite shell, where the catalytic reaction takes place. SiC foam with an open cellular structure can also improve the global transport of mass and heat during plastics pyrolysis. In this work, the effects of the SiO₂/Al₂O₃ ratio and alkaline treatment of ZSM-5 zeolite coated SiC foam under MW irradiation on the variations in product distribution from low-density polyethylene (LDPE) pyrolysis were investigated at 450 °C. The results indicated that the appropriate acidity and pore structure were crucial to upgrading gas and liquid products. Particularly, the creation of a mesoporous structure in ZSM-5 zeolite via alkaline treatment could improve the diffusion of large molecules and products, thus significantly increasing the selectivity of high-valued light olefins and aromatics while inhibiting the formation of unwanted alkanes, which are expected in the chemical industry. Concretely, the concentration of olefins in gas increased to 51.0 vol% for ZSM-5(50)-0.25AT, and 65.6 vol% for ZSM-5 (50)-0.50AT, compared with 45.2 vol% for the parent ZSM-5(50). The relative concentration of aromatics in liquid decreased from 96.6% for ZSM-5(50) to 75.9% for ZSM-5(50)-0.25AT, and 71.1% for ZSM-5(50)-0.50AT. Given the respective yield of gas and liquid, the total selectivity of C2–C4 olefins and aromatics for mesoporous ZSM-5 zeolites could reach 58.6–64.9% during LDPE pyrolysis, which were higher than that for the parent ZSM-5 zeolite.

In this study, we have reported an efficient and stable degradation of pollutants at salinity condition using newly developed solar-light-driven silicone-TiO₂ based photocatalytic immobilized system. The interfacial layer of Silicone-PEG-P/Ag/Ag₂O/Ag₃PO₄/TiO₂ (S-PEG/PAgT) photocatalyst exhibited higher surface roughness, hydrophobicity, better light absorption, and narrow band gap than S-TiO₂. The Rh B degradation by S-PEG/PAgT (91.2%) was 1.71 folds higher than S-TiO₂ (53.5%) under simulated solar light irradiation. The reduction rate was significantly higher in S-PEG/PAgT (0.0792 min⁻¹) than S-TiO₂ (0.0229 min⁻¹). The S-PEG/PAgT demonstrated high TOC removal (>80%), high repeatability (10 cycles) and excellent activity after 30 days of incubation in aqueous NaCl. The mechanism analysis revealed the synergistic effect of surface morphology with irregular chamfered edges and photoinduced reactive species (O₂⁻) with successive formation of free chlorine radicals (Cl) contributed to the removal of pollutants in saline wastewater. Therefore, considering the above advantages of high efficiency and effective elimination of organics illustrates the potential of newly developed S-PEG/PAgT immobilized system in long-term practical treatment real seawater and ballast water.

Zinc chromite nanoparticles (NPs) and zinc chromite–reduced graphene oxide (ZnCr₂O₄-rGO) nanocomposite have been synthesized by the combined effects of reflux condensation and calcination processes. The structural properties were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), UV–visible studies, etc. Structural morphology was investigated by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) that indicate the formation of particles in the nanometer regime. The presence of the elements Zn, Cr, O and C has been confirmed by energy-dispersive X-ray spectroscopy (EDX) images which show the purity of the synthesized products. The photocatalytic activities of both as-prepared samples under visible light irradiation were investigated in presence of hydrogen peroxide (H₂O₂) and the results show that ZnCr₂O₄-rGO nanocomposite has a quite higher photo-activity response than virgin ZnCr₂O₄ NPs. The enhanced photo response indicates that, in ZnCr₂O₄, the photo-induced electrons favor to transfer to the rGO surface and the recombination of electron–hole pairs inhibited for which it results in the significantly increased photocatalytic activity for the ZnCr₂O₄-rGO photocatalyst and this phenomenon is also supported by the band gap value and photoluminescence results. Our outcomes demonstrate that ZnCr₂O₄-rGO nanocomposite is a more promising material to build up an efficient photocatalyst for waste water treatment.

Increasing evidence supports the existence of cross-kingdom gene regulation. However, the therapeutic potential of stress-specific plant miRNAs and their role in UV-related pathologies in human tissue remain largely unexplored. The aim of this study was to investigate the therapeutic potential and mechanisms of action of stress-induced miRNA cocktails (SI-WmiRs) from Einkorn wheat (Triticum monococcum L.) on human keratinocyte (HaCaT) cells exposed to a high dose of UV-B radiation. We used a biofactory approach and irradiated wheatgrass with UV-C for 240 min to obtain the specific SI-WmiRs that wheat produces to recover from UV stress. We followed the plant with molecular and biochemical analyses and extracted our SI-WmiRs at the most appropriate time (0 h and 6 h after UV-C application). Then, we applied the SI-WmiR cocktail to HaCaT cells exposed to high-dose of UV-B radiation. Our results show that UV-B radiation induced lipid peroxidation and DNA damage, as demonstrated by increased malondialdehyde (MDA) levels and changes in the RAPD band profile, respectively. UV stress also impaired IL6/JAK2/STAT3 signalling and activated the inflammatory mediators IL6 and TNF-α in HaCaT cells, leading to significant induction of apoptotic cell death. We found that SI-WmiR transfection prevents lipid peroxidation and oxidative stress-related DNA damage by increasing antioxidant (CuZn-SOD, Mn-SOD) and DNA repair (EXO1, SMUG1 and XRCC3) gene expression. In addition, SI-WmiRs regulated IL6/JAK2/STAT3 signalling by reducing JAK2 and STAT3 gene expression and phosphorylated protein levels compared to the control treatments. Moreover, SI-WmiRs inhibited pro-apoptotic BAX, Caspase 3 and Caspase 8 gene expression and protein levels to prevent apoptosis of UV-stressed HaCaT cells. Our results demonstrate that stress-induced wheat miRNAs produced using a biofactory approach have strong potential as a novel and effective alternative therapy for UV stress-related skin damage.

Antifungal azoles are the most frequently used fungicides worldwide and occur as active ingredients in many antifungal pharmaceuticals, biocides, and pesticides. Azole fungicides are frequent environmental contaminants and can affect the quality of surface waters, groundwater, and drinking water. This study examined the potential of combined vacuum UV (185 nm) and UVC (254 nm) irradiation (VUV/UVC) of the azole fungicide tebuconazole and the transformation product 1,2,4-trizole on degradation and changes in ecotoxicity. In vivo ecotoxicity was examined before and after UV treatment using bioassays with test organisms from different trophic levels to integrate changes in biological effect of the parent compound and the degradation products. The test battery included the luminescent bacterium Aliivibrio fischeri, the Gram-positive bacterium Bacillus subtilis, the fungus Fusarium graminearum, the green microalga Raphidocelis subcapitata, and the crustacean Daphnia magna. The combined VUV/UVC treatment of tebuconazole in drinking water efficiently degraded the parent compound at the µg/L-mg/L level and resulted in transformation products with lower toxicity than the parent compound. A direct positive correlation was observed between the applied UV dose (fluence, J/cm²), the disappearance of tebuconazole, and the decrease in ecotoxicity. The combined VUV/UVC process does not require addition of supplementary oxidants or catalysts and our study suggests that VUV/UVC-mediated photolysis of azole fungicides in water can decrease the overall toxicity and represent a potentially environmentally friendly treatment method.