Extracellular Polymeric Substances (EPS) influenced Poly Cyclic Aromatic Hydrocarbons (PAHs) degrading Klebsiella pneumoniae was isolated from the marine environment. To increase the EPS production by Klebsiella pneumoniae, several physicochemical parameters were tweaked such as different carbon sources (arabinose, glucose, glycerol, lactose, lactic acid, mannitol, sodium acetate, starch, and sucrose at 20 g/L), nitrogen sources (ammonium chloride, ammonium sulphate, glycine, potassium nitrate, protease peptone and urea at 2 g/L), different pH, carbon/nitrogen ratio, temperature, and salt concentration were examined. Maximum EPS growth and biodegradation of Anthracene (74.31%), Acenaphthene (67.28%), Fluorene (62.48%), Naphthalene (57.84%), and mixed PAHs (55.85%) were obtained using optimized conditions such as glucose (10 g/L) as carbon source, potassium nitrate (2 g/L) as the nitrogen source at pH 8, growth temperature of 37 °C, 3% NaCl concentration and 72 h incubation period. The Klebsiella pneumoniae biofilm architecture was studied by confocal laser scanning microscopy (CLSM) and scanning electron microscope (SEM). The present study demonstrates the EPS influenced PAHs degradation of Klebsiella pneumoniae.

Various industrial activities lead to environmental pollution by heavy metals. Toxic heavy metals enter the food chain of dairy cows through feed and water, then transferred into milk. This study investigated the correlations of heavy metal contents between individual cows’ milk, water, silage and soil. The relationships between heavy metal contents in individual cows’ milk with milk protein, fat, lactose, solid nonfat (SNF), and total solids (TS) were analysed. Concentrations of Pb, As, Cr, and Cd in milk, silage and water were measured by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Lead, Cr, and Cd in soil were measured by Atomic Absorption Spectrometry (AAS), and As was detected by Atomic Fluorescence Spectrometry (AFS). One-way non-parametric tests and Spearman correlation analyses were performed using SAS 9.4 software. Levels of Pb and Cd in milk from the unpolluted area were significantly lower (P < 0.01) than those from industrial area. Significantly higher (P < 0.01) As residue was recorded in milk from unpolluted area. Positive correlation of Pb was observed between milk and silage, and As in milk was positively correlated with As in water. Content of As in milk was slightly (r = 0.09) correlated with As in silage, even though strong positive correlation (r = 0.78) was observed between silage and water. Positive correlations were observed for Cr and Cd between milk and silage, as well as milk and soil. Positive correlations were observed in Pb-protein, Cr-protein, and Cd-lactose; other positive correlation coefficients were nearly equal to zero. The results suggest that industrial activities lead to possible Pb and Cd contamination in milk. Drinking water could be the main source of As contamination in cows. No clear relationship was found between milk composition and heavy metals contents in milk. Water and soil on the farm had a partial contribution to heavy metal contamination in milk.

Aflatoxin M₁ (AFM₁) and ochratoxin A (OTA) are highly toxic mycotoxin metabolites that are found as food pollutants, posing health risks to humans and animals. The objective of the current study is to establish a sensitive, reliable method for determining AFM₁ and OTA using high-performance liquid chromatography (HPLC) and attempting to assess the efficacy of bentonite, date pit, and chitosan nanoparticles for AFM₁ and OTA detoxification from contaminated milk. As revealed, AFM₁ was found in 65.7% of analyzed samples ranging from 4.5 to 502 ng/L, while 25.7% of examined samples contained OTA ranging from 1.45 to 301 ng/L. Furthermore, for AFM₁ and OTA. The advanced procedure was thoroughly validated by evaluating linearity (R² > 0.999), LOD (0.9615 and 0.654 ng/L), and LOQ (2.8846 and 1.963 ng/L), recovery (93–95% and 87–91%), as well as precision (≤ 1%RSD). The experimental data revealed a higher removal efficiency of bentonite and date pit than chitosan nanoparticles in the case of AFM₁ (68%, 56%, and 12%) and OTA (64%, 52%, and 10%), respectively with slight change in nutritional milk components like fat, protein, and lactose. Eventually, it is concluded that bentonite and date pit can be considered efficient adsorbing agents to extract AFM₁ and OTA from contaminated milk.

This work aimed to explore the concentration of nickel, manganese, iron, copper, chromium, and lead in the milk of goat herds in the industrial area of Asaluyeh (southern Iran) and the non-industrial area of Kaki. The milk of 16 goat herds (each herd had at least ten goats) was collected in several villages in each area, and at the same time, the drinking water and forage of goats were sampled. The concentration of elements in the samples was determined by ICP-OES. The mean concentrations of chromium, copper, iron, manganese, lead, and nickel in milk samples of the Asaluyeh area were 16.423 ± 0.349, 0.146 ± 0.118, 6.111 ± 0.501, 0.239 ± 0.016, 0.141 ± 0.030, and 1.447 ± 0.101 mg/kg, respectively. Concentrations of heavy metals (except for copper) in the milk of goats in the industrialized area of Asaluyeh were significantly higher than that of Kaki (P < 0.05). Also, the content of heavy metals was significantly correlated with lactose levels (P < 0.05). The hazard index for drinking the goat milk was computed to be 0.444 and 0.386 for the Asaluyeh and Kaki area, respectively, which shows a minimal effect of this exposure pathway.

Occurrence of halonitromethanes (HNMs) in drinking water has been a concern recently due to the potentially high human health risks of HNMs. Mechanisms of formation of HNMs during disinfection has remained controversial. The objective of this study was to investigate the effects of nitrite on the formation of trichloronitromethane (TCNM), a dominant HNM species occurring in chlorinated water. Polyhydroxy-phenols (hydroquinone, catechol, resorcinol, and phloroglucinol) and sugars (glucose, maltose, and lactose) were compared as surrogates/model compounds of common organic precursors of humic and non-humic substances in natural organic matter, respectively. The results showed that TCNM was not detectable after chlorinated sugars with the addition of nitrite. Upon chlorinating the polyhydroxy-phenols, TCNM formation varied greatly among different compounds, i.e., resorcinol > phloroglucinol > catechol >> hydroquinone. The results demonstrated that TCNM formation in the presence of nitrite was a function of aromaticity as well as the position and number of hydroxyl groups on the benzene rings of a compound, and the TCNM formation potential of humic substances was greater than that of non-humic substances. For catechol, resorcinol, and phloroglucinol, TCNM formation varied greatly with pH but generally remained stable with the increase of reaction time and temperature.

Herein, we report the synthesis of carbon spheres (CS) using a relatively low-temperature hydrothermal technique using lactose as precursor pre-treated with HCl. The successful synthesis, spherical morphology, porous morphology, and monodispersed nature of CS were confirmed via scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Isoelectric point (IEP) was determined as 3.8, and at neutral conditions the prepared carbon particles are negatively charged at − 43 ± 2.50 mV. Owing to their spherical morphology, almost uniform distribution and negatively charged surface at neutral conditions, the prepared CS were used as adsorbent for the removal of methylene blue (MB) and Geimsa stain (GS) from aqueous environments at pH 7. It was shown that CS has 97% adsorption capability for GS, whereas for methylene MB, the maximum adsorption capacity was 67% for 0.1-g CS from 50-ppm dye solutions in DI water. The adsorption studies revealed that the Langmuir and modified Fruendlich (MFE) adsorption models resulted in considerably high linear correlation coefficient (r ²) values and the efficient adsorption of positively charged species on CS can be represented better with the MFE model. Graphical Abstract Carbon spheres from D-lactose for environmental application

Atrazine is a persistent organic pollutant in the environment which affects not only terrestrial and aquatic biota but also human health. Since its removal from the environment is needed, atrazine biodegradation is achieved in the present study using the bacterium Rhodococcus sp. BCH2 isolated from soil, long-term treated with atrazine. The bacterium was capable of degrading about 75 % atrazine in liquid medium having pH 7 under aerobic and dark condition within 7 days. The degradation ability of the bacterium at various temperatures (20–60 °C), pH (range 3–11), carbon (glucose, fructose, sucrose, starch, lactose, and maltose), and nitrogen (ammonium molybdate, sodium nitrate, potassium nitrate, and urea) sources were studied for triumph optimum atrazine degradation. The results indicate that atrazine degradation at higher concentrations (100 ppm) was pH and temperature dependent. However, glucose and potassium nitrate were optimum carbon and nitrogen source, respectively. Atrazine biodegradation analysis was carried out by using high-performance thin-layer chromatography (HPTLC), Fourier transform infrared spectroscopy (FTIR), and liquid chromatography quadrupole time-of-flight (LC/Q-TOF-MS) techniques. LC/Q-TOF-MS analysis revealed formation of various intermediate metabolites including hydroxyatrazine, N-isopropylammelide, deisopropylhydroxyatrazine, deethylatrazine, deisopropylatrazine, and deisopropyldeethylatrazine which was helpful to propose biochemical degradation pathway of atrazine. Furthermore, the toxicological studies of atrazine and its biodegraded metabolites were executed on earthworm Eisenia foetida as a model organism with respect to enzymatic (SOD and Catalase) antioxidant defense mechanism and lipid peroxidation studies. These results suggest innocuous degradation of atrazine by Rhodococcus sp. BCH2 in nontoxic form. Therefore the Rhodococcus sp.BCH2 could prove a valuable source for the eco-friendly biodegradation of atrazine pesticide.