Partly because of the low bioavailability of metals, the soil cleaning-up using phytoremediation is usually time-consuming. In order to enhance the amount of metals at the plant's disposal, the soil bioaugmentation coupled together with phytoextraction is an emerging technology. In this preliminary work, two agricultural soils which mainly differed in their Cr, Hg and Pb contents (LC, low-contaminated soil; HC, high-contaminated soil) were bioaugmented in laboratory conditions by either bacterial (Bacillus subtilis, Pseudomonas aeruginosa, Pseudomonas fluorescens or Ralstonia metallidurans) or fungal inocula (Aspergillus niger or Penicillium simplicissimum) and incubated during three weeks. The LC soil pots bioaugmented with A. niger and P. aeruginosa contained higher concentrations of Cr (0.08 and 0.25 mg.kg-¹ dw soil) and Pb (0.25 and 0.3 mg.kg-¹ dw soil) in the exchangeable fraction F1 (extraction with MgCl₂) by comparison with the non-bioaugmented soil where neither Cr nor Pb was detected. Conversely, immobilization of Cr and Pb in the soil were observed with the other microorganisms. The soil bioaugmentation not only modified the metal speciation for the most easily extractable fractions but also modified the distribution of metals in the other fractions, to a lesser extent nevertheless. The difference in microbial concentrations between the bioaugmented or not HC soils reached up to 1.8 log units. Thus the microorganisms that we chose for the soil bioaugmentation were competitive towards the indigenous microflora. The PCA analysis showed close positive relationships between the microorganisms which potentially produced siderophores in the soil and the amount of Cr and Pb in the fraction F1.

This study investigates the fate and behavior of lead (Pb), copper (Cu), antimony (Sb), and arsenic (As) in a shooting range soil. The soil samples were collected from the surface (0-15 cm) and the subsurface (15-40 cm and 40-55 cm) of a grassy and wood chip covered impact area behind a firing position. Optical microscopy images indicate significant amounts of corroded bullet fragments and organic wood chips in the surface soil. Analysis by X-ray powder diffraction (XRPD) and scanning electron microscopy electron dispersive X-ray spectroscopy (SEM-EDS) showed that metallic Pb was transformed into lead oxides (litharge PbO and massicot PbO) and lead carbonates (hydrocerussite Pb₃(CO₃)₂(OH)₂, cerussite PbCO₃, and plumbonacrite Pb₅(CO₃)₃O(OH)₂). Rietveld quantification indicated the surface soil contained 14.1% metallic Pb, 17.9% hydrocerussite, 5.2% plumbonacrite, 5.9% litharge, and 3.9% massicot on a dry weight basis, or a total of 39.7% Pb, far in excess of lead concentrations typically found in US shooting range soils. Metallic Cu (bullet jacket material) appeared stable as no secondary minerals were detected in the surface soil. As and Sb concentrations were on the order of 1,057 mg/kg and 845 mg/kg respectively. The elevated soil pH coupled with high organic carbon content is thought to have caused downward migration of metals, especially for Pb, since 4,153 mg Pb/kg was observed at a depth of 55 cm. More than 60% of Pb was concentrated in the coarse soil (> 0.425 mm) fraction, suggesting soil clean-up possible by physical soil washing may be viable. The concentrations of Pb, As, and Sb in the toxicity characteristic leaching procedure (TCLP) extracts were 8,869 mg/L, 6.72 mg/L, and 6.42 mg/L respectively, were above the USEPA non-hazardous regulatory limit (As and Pb) of 5 mg/L. The elevated Sb and As concentrations draw concern because there is historically limited information concerning these metals at firing ranges and several values exceeded local soil cleanup criteria. As the high Pb concentrations appeared to be linked to the presence of organic-rich berm cover materials, the use of wood chips as berm cover to prevent soil erosion requires reconsideration as a shooting range management practice.

Although lead (Pb) emissions have dropped drastically with the phase-out of tetra-ethyl lead (TEL) as a fuel additive, Pb deposited along highway corridors continues to be of concern because of its toxicity. This paper provides comprehensive data on the extent and distribution of Pb in roadside soils, Pb interaction with soils as a function of soil composition, the retention capacity of soil based on batch adsorption tests, the retention mechanism of Pb using selective sequential extraction, the potential for mobility using batch desorption tests with simulated rain and winter road salt, and column leach tests. Highway soils on high-traffic sections near Burnaby, Canada were found to have Pb accumulations up to 1628mg/kg soil. Contamination was mainly in the top 0.3m, with concentrations rapidly decreasing to the background level at a depth of 0.6m. The top layer contained more organic material and had a high adsorption capacity. Highway soils were found to have 3-10 times higher Pb adsorption capacities than the amount currently deposited. Selective sequential extraction indicated low exchangeable Pb in highway soils. Batch desorption tests with leaching solutions of H₂O (pH 5.5), HNO₃ solution (pH 4.0) and aqueous NaCl solution (0.17M) indicate low likelihood of significant leaching. Selective sequential extraction, leachate extraction and desorption tests show that Pb has limited mobility in highway soil.

Atmospherically deposited lead in the upper layer of the heavily eroded peatlands of the Peak District, southern Pennines, UK, reaches concentrations in excess of 1,000 mg kg-¹. Erosion of the upper peat layer in this region is releasing lead, associated with eroded peat particles, into the fluvial system. Understanding the process mechanisms that control dissolved lead concentrations in contaminated peatland streams is vital for understanding lead cycling and transport in peatland streams. Many headwater streams of the southern Pennines recharge drinking water reservoirs. Measurements in the Upper North Grain (UNG) study catchment show that mean sediment-associated and dissolved lead concentrations are 102 ± 39.4 mg kg-¹ and 5.73 ± 2.16 μg l-¹, respectively. Experimental evidence demonstrates that lead can desorb from suspended sediments, composed of contaminated peat, into stream waters. In-stream processing could therefore account for the elevated dissolved lead concentrations in the fluvial system of UNG.

This study was aimed at elucidating the importance of original Pb-speciation versus soil-characteristics to mobility and distribution of Pb in industrially polluted soils. Ten industrially polluted Danish surface soils were characterized and Pb speciation was evaluated through SEM-EDX studies, examination of pH-dependent desorption, distribution in grain-size fractions and sequential extraction. Our results show that the first factors determining the speciation of Pb in soil are: (1) the stability of the original speciation and (2) the contamination level, while soil characteristics are of secondary importance. In nine of ten soils Pb was concentrated strongly in the soil fines (< 0.063 mm). In all soils, particles with a highly concentrated Pb-content were observed during SEM-EDX. In eight of the soils, the particles contained various Pb-species with aluminum/iron, phosphate, sulfate and various metals (in solder and other alloys) as important associates. In the one soil, where Pb was not concentrated in the soil fines, Pb was precipitated solely as PbCrO₄, while pure (metallic) Pb was repeatedly observed in the last soil. Pb was bound strongly to the soils with > 50% extracted in step III (oxidizing) and IV (residual) of sequential extraction for all soils but one. A significant amount of exchangeable Pb existed only in severely contaminated soils, where the bonding capacity of organic matter and oxides was exceeded. Among soil constituents, Pb was observed to adsorb preferentially to feldspars and organic matter while presence of phosphate increased the strength of the Pb-bonding in phosphate-rich soils.