The Black Sea is a semi-enclosed basin subject to major anthropogenic pressures, including marine litter and plastic pollution. Due to numerous large rivers draining into the basin and a population settled along the coast, the region could accumulate significant amounts of floating litter over time. Until now, only limited field data were available, and litter quantities and distribution remained unknown. In this study, floating marine macro litter (FMML) was assessed at the regional Black Sea scale for the first time, showing relatively high litter densities across the basin that reached a weighted mean of 81.5 items/km². Monitoring data revealed an accumulation of floating items offshore in the eastern part of the basin, resembling on a small scale a ‘garbage patch’, where litter items were trapped, showing elevated densities in comparison to their surrounding areas. Most of these items were made of plastic materials (ca. 96%) and included large numbers of plastic and polystyrene fragments of small size ranges (2.5–10 cm). Harmonised field data collection through consistent and regular monitoring programmes across the region is essential to establish baselines and thresholds for large scale assessment at international level.

With conventional plastics posing a great threat to marine organisms, and potentially also to humans, bio-based, biodegradable plastics are being offered as an ecological solution by which to reduce the environmental impact. Inside compost facilities, bioplastics that comply with the EN 13432:2000 international standard biodegrade almost completely within 180 days. However, outside compost facilities, and specifically in marine environments, these bioplastics may have a similar effect to that of fossil-fuel based plastics. Here we investigated the effects of polyethylene terephthalate (PET) and polylactic acid (PLA) single-use cups and plates on a solitary ascidian’s biological and ecological features. Both PET and PLA microparticles reduced the fertilization rate of Microcosmus exasperatus, with no significant difference between materials. Accumulation rates in adult M. exasperatus exposed to micronized PET and PLA particles at two concentrations were similar for both the bioplastic material and the conventional plastic particles, with no significant difference between the two materials. A microbial-based digestive protocol was developed in order to recover the bioplastic material from ascidian tissue and reduce any material-loss caused by the known digestion protocols. Finally, PET plates submerged for three months in the Red Sea exhibited a significantly higher community richness and cover area in comparison to PLA plates, which did not provide a firm substrate for settlers. Indeed, coverage by the solitary ascidian Herdmania momus was significantly higher on PET plates. The current study demonstrates that discarded bioplastic products may have similar effects to those of conventional plastics on marine organism fertilization and biological accumulation, emphasizing the need to revise both the production and marketing of “biodegradable” and “compostable” plastics in order to prevent a further negative impact on ecosystems due to the mismanagement of bioplastic products.

In the Baltic Sea, water is stratified due to differences in density and salinity. The stratification prevents water from mixing, which could affect sinking rates of microplastics in the sea. We studied the accumulation of microplastics to halocline and thermocline. We sampled water with a 100 μm plankton net from vertical transects between halo- and thermocline, and a 30 L water sampler from the end of halocline and the beginning of thermocline. Thereafter, microplastics in the whole sample volumes were analyzed with imaging Fourier transform infrared spectroscopy (FTIR). The plankton net results showed that water column between halo- and thermoclines contained on average 0.92 ± 0.61 MP m⁻³ (237 ± 277 ng/m⁻³; mean ± SD), whereas the 30 L samples from the end of halocline and the beginning of thermocline contained 0.44 ± 0.52 MP L⁻¹ (106 ± 209 ng L⁻¹). Hence, microplastics are likely to accumulate to thin layers in the halocline and thermocline. The vast majority of the found microplastics were polyethylene, polypropylene and polyethylene terephthalate, which are common plastic types. We did not observe any trend between the density of microplastics and the sampling depth, probably because biofilm formation affected the sinking rates of the particles. Our results indicate the need to sample deeper water layers in addition to surface waters at least in the stratified water bodies to obtain a comprehensive overview of the abundance of microplastics in the aquatic environment.

Contamination of the Technology Critical Elements (TCE) through e-wastes and beach plastic wastes are some of the attributes to the recent rise in marine pollution. A generalized study of pollutants in the marine waters showed no evidence of the effect of TCE. However, an in-depth study revealed the mean TCE concentrations in the sequence of gallium (Ga) > thallium (Tl) > niobium (Nb) > tellurium (Te) > tantalum (Ta) > germanium (Ge) > indium (In) in wastewater (0.38 ng.L⁻¹) >sediment (0.3 ng g⁻¹) e-wastes (0.29 ng g⁻¹) > coastal water (0.26 ng.L⁻¹) > plastic wastes (0.133 ng g⁻¹) >fish (0.13 ng g⁻¹). The mean site-wise analysis of all the samples showed high TCE during winter than in the summer seasons as well, in the sequence of Site-II>Site-I>Site-V>Site-IV>Site-III. The mean distribution coefficient (Kd) of TCE was high in the summer (1.95) than during the winter (1.60) seasons but, the reverse seasonal effects were observed with the bioavailability (%BA) and geo-accumulation index (Igₑₒ). This index quantified TCE in e-wastes and plastic materials. Furthermore, these indicators labeled TCE as one among the sources for ‘Fish Kill,’ a futuristic threat to seafood consumers and a biomonitoring tool to marine pollution.

Dangerous goods are particularly hazardous, as they can be flammable, explosive, and toxic. These characteristics make them vulnerable to accidents, and such mishaps during port operations can lead to massive economic losses and even deaths. It is, therefore, necessary and important to analyze and study the dangerous goods accidents at ports, so as to identify major factors and prevent them. Formal concept analysis (FCA) is a powerful tool for rule extraction. This paper introduces FCA along with relevant documents and case studies to analyze the dangerous goods accidents at China’s ports, building a concept lattice model of dangerous goods accidents at China’s ports, and reduces the condition attributes to come up with three key attributes of dangerous goods accidents at China’s ports: warehousing management, facilities and equipment, goods registration and extract four effective diagnostic rules for dangerous goods accidents at ports. This paper proposes corresponding governance strategies to the rules of dangerous goods accidents, which can significantly prevent and manage dangerous goods accidents at China’s ports in the future. In the future, the concept scale can be introduced to study the problem that the influencing factor is multi-valued attribute so as to expand the scope of research.

Microplastic particles are a global concern due to their widespread and growing threat to marine and coastal environments. To improve knowledge of microplastic pollution in China, we investigated 25 sediment samples collected with a box corer in the Southern Yellow Sea and East China Sea off the coast of China. The microplastics were extracted from sediments via density separation, after which they were observed under a microscope and characterized according to shape, color, and size, while polymer type identification was performed using micro-Fourier transform infrared spectroscopy. The abundance of microplastics in the offshore region of the Southern Yellow Sea and East China Sea was mapped. The mean concentration of microplastics at the 25 sites was 13.4 ± 0.6 particles 100 g⁻¹ dry weight (range: 6.0–24.0 particles 100 g⁻¹ dry weight). Based on the categorization according to shape, color, and size, fiber (77%) was the most abundant shape, while blue (35%) and transparent (29%) were the most prevalent colors. In addition, the dominant size of microplastics was smaller than 1000 μm which accounted for 89%. Finally, polyethylene, polyethylene terephthalate, acrylic, polyester, cellulose, and cellophane were the most abundant types of microplastics identified. Our result highlighted the presence of microplastics in offshore sediments from the Yellow Sea and East China Sea, and provided useful information for evaluating the environmental risks posed by microplastics in China.

The aim of the present study was to optimize the protocol for sampling marine macroalgae to be used to biomonitor heavy metal contamination in marine ecosystems. For this purpose, we collected 50 subsamples of the brown seaweed Fucus vesiculosus at random in each of three sampling sites (SS) and determined the concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Hg, N, Ni, Pb, Zn and δ15N. We used semivariograms to explore the possible existence of spatial structure in the concentrations of the elements. Spatial structure was observed in 88% of the semivariograms studied, with element concentrations varying longitudinally and transversally along the SS. Using randomization techniques, we estimated that in each SS, a minimum of 30 evenly distributed subsamples should be collected within three bands parallel to the coastline (and also at different heights on the rocks if necessary), and analyzed in a single composite sample representative of the intra-SS variability.

Microplastics (plastic particles, 0.1 μm–5 mm in size) are widespread marine pollutants, accumulating in benthic sediments and shorelines the world over. To gain a clearer understanding of microplastic availability to marine life, and the risks they pose to the health of benthic communities, ecological processes and food security, it is important to obtain accurate measures of microplastic abundance in marine sediments. To date, methods for extracting microplastics from marine sediments have been disadvantaged by complexity, expense, low extraction efficiencies and incompatibility with very fine sediments.Here we present a new, portable method to separate microplastics from sediments of differing types, using the principle of density floatation. The Sediment-Microplastic Isolation (SMI) unit is a custom-built apparatus which consistently extracted microplastics from sediments in a single step, with a mean efficiency of 95.8% (±SE 1.6%; min 70%, max 100%). Zinc chloride, at a density of 1.5 g cm−3, was deemed an effective and relatively inexpensive floatation media, allowing fine sediment to settle whilst simultaneously enabling floatation of dense polymers. The method was validated by artificially spiking sediment with low and high density microplastics, and its environmental relevance was further tested by extracting plastics present in natural sediment samples from sites ranging in sediment type; fine silt/clay (mean size 10.25 ± SD 3.02 μm) to coarse sand (mean size 149.3 ± SD 49.9 μm). The method presented here is cheap, reproducible and is easily portable, lending itself for use in the laboratory and in the field, eg. on board research vessels. By employing this method, accurate estimates of microplastic type, distribution and abundance in natural sediments can be achieved, with the potential to further our understanding of the availability of microplastics to benthic organisms.