Microplastics (MPs) pollution in Tangxun Lake, the largest urban lake in China, was investigated. The average MPs pollution in sediment (1.81 ± 1.75 × 10⁴ items kg⁻¹) is at a high level, while the MPs in lakeshore water (917.77 ± 742.17 items m⁻³) is in the middle to low level compared with existing studies, which is related to the government's protection. Fragments and fibers are the most common shapes in sediment and water, respectively. MPs size <1 mm dominates in the sediment, while the MPs in water has a larger size. The distribution of MPs in the inner lake shows that pellets tend to “hidden” in sediments. Suspected MPs are randomly selected for polymer detection by Micro-Raman microscopy. Polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) are the most common polymer types in water, sediment and atmospheric deposition MPs samples. The input of wastewater, fishery and surrounding human activities are the main sources of MPs in sediment. Atmospheric deposition has a great impact on the distribution of MPs, while the contribution of surface runoff to lake MPs is not remarkable. In addition, MPs in sediments have exceeded the environmental carrying capacity. More attention should be focused on the sediment, where huge amounts of MPs are “hidden”.

Dissolved organic matter (DOM) plays a significant role in the photochemical behavior of nano- and micro-plastic particles (NPs/MPs). We investigated the influence of DOM on the mechanism on the photoaging of NPs/MPs with different molecular structures under UV₃₆₅ irradiation in water. DOM components used in this study are mainly humic acid and fulvic acid. The results showed that DOM promoted the weathering of aliphatic NPs/MPs (polypropylene (PP)), but inhibited or had only a minor effect on the photoaging of aromatic NPs/MPs (polystyrene (PS) NPs/MPs, carboxyl-modified PS NPs, amino-modified PS NPs, and polycarbonate MPs). NPs with a large surface area may adsorb sufficient DOM on the particle surfaces through π-π interactions, which competes with NPs for photon absorption sites, thus, can delay the photoaging of PS NPs. Aromatic MPs may release phenolic compounds that quench •OH, thereby weakening the photoaging process. For aliphatic MPs, the detection of peracid, aldehyde, and ketone groups on the polymer surface indicated that DOM promoted weathering of PP MPs, which was primarily because the generation of •OH due to DOM photolysis may attack the polymer by C–C bond cleavage and hydrogen extraction reactions. This study provides insight into the UV irradiation weathering process of NPs/MPs of various compositions and structures, which are globally distributed in water.

Microplastic pollution has attracted significant attention as an emerging global environmental problem. One of the most important issues with microplastics is the leaching of harmful additives. This review summarizes the recent advances in the understanding of the leaching phenomena in the context of the phase equilibrium between microplastics and water, and the release kinetics. Organic additives, which are widely used in plastic products, have been introduced because they have diverse physicochemical properties and mass fractions in plastics. Many theoretical and empirical models have been utilized in laboratory and field studies. However, the partition or distribution constant between microplastics and water (Kₚ) and the diffusivity of an additive in microplastics (D) are the two key properties explaining the leaching equilibrium and kinetics of hydrophobic organic additives. Because microplastics in aquatic environments undergo dynamic weathering, leaching of organic additives with high Kₚ and/or low D cannot be described by a leaching model that only considers microplastic and water phases with a fixed boundary. Surface modifications of microplastics as well as biofilms colonizing microplastic surfaces can alter the leaching equilibrium and kinetics and transform additives. Further studies on the release of hydrophobic organic additives and their transformation products under various conditions are required to extend our understanding of the environmental fate and transport of these additives in aquatic environments.

Microplastics (MPs) released from both primary and secondary sources affect the functioning of aquatic system. These MPs and components leached, can interact with aquatic organisms of all trophic levels, including the primary producers, such as microalgae. Considering the ecological value of microalgae and the toxicological effects of MPs towards them, this review provides: (1) a detailed understanding of the interactions between MPs and microalgae in the complex natural environment; (2) a discussion about the toxic effects of single type and mixtures of plastic particles on the microalgae cells, and (3) a discussion about the impacts of MPs on various features of microalgae -based bioremediation technology. For this purpose, toxic effects of MPs on various microalgal species were compiled and plastic components of MPs were ranked on the basis of their toxic effects. Based on available data, ranking for various plastic components was found to be: Polystyrene (PS) (rank 1) > Polyvinyl Chloride (PVC) > Polypropylene (PP) > Polyethylene (PE) (rank 4). Furthermore, the review suggested the need to understand joint toxicity of MPs along with co-contaminants on microalgae as the presence of other pollutants along with MPs might affect microalgae differently. In-depth investigations are required to check the impact of MPs on microalgae-based wastewater treatment technology and controlling factors.

Nowadays, marine ecosystems are under severe threat from the simultaneous presence of multiple stressors, including microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) such as benzo[a]pyrene (B[a]P). In addition to their presence in various marine compartments, there are increasing concerns on the potential capacity of MPs to sorb, concentrate and transfer these pollutants in the environment. Although their ecotoxicological impacts are currently evident, few works have studied the combined effects of these contaminants. Therefore, the major purpose of this work was to assess the toxicity of environmental relevant concentrations of MPs (<30 μm) and B[a]P, alone and in mixture, in the seaworm Hediste diversicolor by exploring their accumulation and hazardous biological effects for 3 and 7 days. Environmental MPs were able to increase B[a]P in a time-dependent manner. The obtained results showed that individual treatments, as well as co-exposure to contaminants, caused cytotoxicity and genotoxicity in the cœlomic fluid cells, while oxidative stress effects were observed at tissue and gene levels associated with alteration in neurotransmission. Overall, our findings provide additional clues about MPs as organic pollutant vectors in the marine environment, and contribute to a clearer understanding of their toxicological risk to aquatic invertebrates.

Sewage sludge used as agricultural fertilizer has been identified as an important source of microplastics (MPs) to the environment. However, the fate of MPs added to agricultural soils is largely unknown. This study investigated the fate of MPs in agricultural soils amended with sewage sludge and the role of surface water runoff as a mechanism driving their transfer to aquatic ecosystems. This was assessed using three experimental plots located in a semi-arid area of Central Spain, which were planted with barley. The experimental plots received the following treatments: (1) control or no sludge application; (2) historical sludge application, five years prior to the experiment; and (3) sludge application at the beginning of the experiment. MPs were analyzed in surface water runoff and in different soil layers to investigate transport and infiltration for one year. The sewage sludge used in our experiment contained 5972–7771 MPs/kg dw. Based on this, we estimated that about 16,000 MPs were added to the agricultural plot amended with sludge. As expected, the sludge application significantly increased the MP concentration in soils. The control plot contained low MP concentrations (31–120 MPs kg⁻¹ dw), potentially originating from atmospheric deposition. The plot treated five years prior to the experiment contained 226–412 and 177–235 MPs kg⁻¹ dw at the start and end of the experiment, respectively; while the recently treated plot contained 182–231 and 138–288 MPs kg⁻¹ dw. Our study shows that MP concentrations remain relatively constant in agricultural soils and that the MP infiltration capacity is very low. Surface water runoff had a negligible influence on the export of MPs from agricultural soils, mobilizing only 0.2–0.4% of the MPs added with sludge. We conclude that, in semi-arid regions, agricultural soils can be considered as long-term accumulators of MPs.

This study investigates the incidence of MPs in surface sediment samples, collected from the Anzali Wetland, Gillan province, North of Iran. This natural habitat receives municipal wastewater effluents and hosts industries and recreational activities that could release plastic to the wetland. There is need for studies to understand MPs pollution in wetlands. A total of 40 superficial sediment samples were taken covering potential pollution hotspots in the wetland. The average level of MPs was 362 ± 327.6 MP/kg: the highest MPs levels were near the outlet of a highly urbanized river (Pirbazar River) (1380 MP/kg), which runs through Rasht city. This was followed by 1255 MP/kg where there was intense fishing, boating and tourism activities in the vicinity of Bandar-e Anzali city. Fibers were the most common type of MPs (80% of the total MPs detected). The MPs polluting the wetland were predominantly white/transparent (42%), and about 40% of them were >1000 μm. Polypropylene (PP) and polyethylene (PE) prevailed in MPs found. MPs were characterized with polarized light microscopy, Raman spectroscopy, Scanning Electron Microscopy coupled with Energy-Dispersive X-ray spectroscopy. Microplastics levels were found to correlate significantly (p > 0.7) with electrical conductivity (EC) and sand-size fraction of the sediments. Coarse-grained sediments presented large capacity to lodge the MPs. This study can be used to establish protection policies in wetlands and newly highlights the opportunity of intercepting MPs in the Anzali Wetland, which are generally >250 μm, before they fragment further.

Evidence shows that the majority of aquatic field microplastics (MPs) could be microfibers (MFs) which can be originated directly from massive sources such as textile production and shedding from garments, agricultural textiles and clothes washing. In addition, wear and tear of tyres (TRWPs) emerges as a stealthy major source of micro and nanoplastics, commonly under-sampled/detected in the field. In order to compile the current knowledge in regards to these two major MPs sources, concentrations of concern in aquatic environments, their distribution, bulk emission rates and water mitigation strategies were systematically reviewed. Most of the aquatic field studies presented MFs values above 50%. MPs concentrations varied from 0.3 to 8925 particles m⁻³ in lakes, from 0.69 to 8.7 × 10⁶ particles m⁻³ in streams and rivers, from 0.16 to 192000 particles m⁻³ estuaries, and from 0 to 4600 particles m⁻³ in the ocean. Textiles at every stage of production, use and disposal are the major source of synthetic MFs to water. Laundry estimates showed an averaged release up to 279972 tons year⁻¹ (high washing frequency) from which 123000 tons would annually flow through untreated effluents to rivers, streams, lakes or directly to the ocean. TRWPs in the aquatic environments showed concentrations up to 179 mg L⁻¹ (SPM) in runoff river sediments and up to 480 mg g⁻¹ in highway runoff sediments. Even though average TRWR emission is of 0.95 kg year⁻¹ per capita (10 nm- 500 μm) there is a general scarcity of information about their aquatic environmental levels probably due to no-availability or inadequate methods of detection. The revision of strategies to mitigate the delivering of MFs and TRWP into water streams illustrated the importance of domestic laundry retention devices, Waste Water Treatment Plants (WWTP) with at least a secondary treatment and stormwater and road-runoff collectors quality improvement devices.

There has been an increasing interest in the pollution caused by meso- and microplastics (MMPs) in terrestrial ecosystems. Mulch film was once considered to be the most important source of MMPs in the mulching cultivated soil. However, the academic community has not given sufficient scientific evidence. In this study, stratified random sampling method was used to selectively interview households in Hebei province, China (400 households, 20 villages, 5 counties). Finally, household characteristics and mulch film use behavior of 41 households were collected, and corresponding soil samples were sampled. The results showed that 1) the abundance of MMPs was 29.3 ± 33.1 items·kg⁻¹ (DW) and the particle size of MMPs was 2.95 × 10³±1.75 × 10³ μm, and the proportion of MMPs derived from Polyethylene (PE) was only 18.8%; 2) the mass of MMPs was 2.90 ± 3.72 mg kg⁻¹ (DW) and the proportion of PE MMPs was 43.75%, which has the highest mass percentage; 3) After controlling the endogenous and dummy variables, the use history of mulch film (HistMF) was found to be positively correlated to the abundance of MMPs and inversely correlated to the particle size, but nor with the mass of MMPs; 4) Regarding the heterogeneous characteristics of MMPs, including particle size, color, shape, and type, the findings found the absence of a significant correlation between HistMF and the abundance and mass of PE. In summary, mulch-derived MMPs are not the primary source of MMPs in the mulching cultivated soil in terms of abundance but probably be in terms of mass.

The accumulation of human-derived debris in the oceans is a global concern and a serious threat to marine wildlife. There is a volume of evidence that points to deleterious effects of marine debris (MD) on cetaceans in terms of both entanglement and ingestion. This review suggests that about 68% of cetacean species are affected by interacting with MD with an increase in the number of species reported to have interacted with it over the past decades. Despite the growing body of evidence, there is an ongoing debate on the actual effects of plastics on cetaceans and, in particular, with reference to the ingestion of microplastics and their potential toxicological and pathogenic effects. Current knowledge suggests that the observed differences in the rate and nature of interactions with plastics are the result of substantial differences in species-specific diving and feeding strategies. Existing projections on the production, use and disposal of plastics suggest a further increase of marine plastic pollution. In this context, the contribution of the ongoing COVID-19 pandemic to marine plastic pollution appears to be substantial, with potentially serious consequences for marine life including cetaceans. Additionally, the COVID-19 pandemic offers an opportunity to investigate the direct links between industry, human behaviours and the effects of MD on cetaceans. This could help inform management, prevention efforts, describe knowledge gaps and guide advancements in research efforts. This review highlights the lack of assessments of population-level effects related to MD and suggests that these could be rather immediate for small populations already under pressure from other anthropogenic activities. Finally, we suggest that MD is not only a pollution, economic and social issue, but also a welfare concern for the species and populations involved.