The increasing demand for using competent and inexpensive methods based on biomaterials, like adsorption and biosorption, has given rise to the low-priced alternative biosorbents. In the past few years, Moringa oleifera (MO) has emerged as a green and low-priced biosorbent for the treatment of contaminated waters with heavy metals and dyes, and given its availability, we can create another generation of effective biosorbents based on different parts of this plant. In this review paper, we have briefed on the application of MO as a miraculous biosorbent for water purification. Moreover, the primary and cutting-edge methods for the purification and modification of MO to improve its adsorption are discussed. It was found that MO has abundant availability in the regions where it is grown, and simple chemical treatments increase the effectiveness of this plant in the treatment of some toxic contaminants. The different parts of this miraculous plant’s “seeds, leaves, or even husks” in their natural form also possess appreciable sorption capacities, high efficiency for treating low metal concentrations, and rapid adsorption kinetics. Thus, the advantages and disadvantages of different parts of MO as biosorbent, the conditions favorable to this biosorption, also, the proposal of a logical mechanism, which can justify the high efficiency of this plant, are discussed in this review. Finally, several conclusions have been drawn from some important works and which are examined in this review, and future suggestions are proposed.

This study evaluated the protective potentials of Moringa oleifera leaf alcoholic extract (MOLE) against bisphenol A (BPA)-induced stomach ulceration and inflammation in rats. Control rats received olive oil. Second group administered MOLE (200 mg/kg bwt) by oral gavage. Third group was given BPA (50 mg/ kg bwt) for 4 weeks. Fourth group administrated BPA and MOLE simultaneously. Fifth group was given MOLE for 4 weeks then administered BPA and MOLE for another 4 weeks. Bisphenol A induced gastric ulceration and decreased the volume of gastric juice, prostaglandin E2 (PGE2), reduced glutathione (GSH) and interleukin 10 (IL-10) contents, superoxide dismutase (SOD) activity, and proliferating cell nuclear antigen (PCNA) protein in stomach tissues, while increased the titratable acidity, malondialdehyde (MDA), tumor necrosis factor alpha (TNF-α) and interleukin 6 (IL-6) contents, and caspase-3 and NF‑κB proteins in stomach tissue. However, MOLE ameliorated BPA-induced gastric ulceration and significantly increased the volume of gastric juice, PGE2, GSH and IL-10 contents, SOD activity, and PCNA protein while significantly decreased titratable acidity, MDA, TNF-α and IL-6 contents, and of NF‑κB and caspase-3 proteins in gastric tissue. This study indicated that MOLE protected stomach against BPA-induced gastric injury via its anti-oxidant, anti-apoptotic, and anti-inflammatory activities.

Improving digestibility, fermentation characteristics, and reducing greenhouse biogases to protect the environment without the use of synthetic materials is an important goal of modern-day farming and nutritionist. Plant extracts are capable of solving these. This is due to the digestive enzymes and the bioactive components capable of performing antimicrobial functions inherent in these plants. This study was aimed to investigate the effect of standard maize substrate treated with selected herbs and spices extracts on ruminal environmental biogas production and pressure during fermentation via biogas production technique. Herbs (Azadirachta indica leaves (T1), Moringa oleifera leaves (T2), Ocimum gratissimum leaves (T3) and spices (Allium sativum bulb (T4), Zingiber officinale rhizome (T5)) were harvested, air dried, and milled using standard procedures. Methanolic extracts of the herbs and spices were prepared and used as additives at different concentrations (50, 100, and 150 μL) to the maize substrate for in vitro biogas production. Data were analyzed using regression analysis. There were significant (P < 0.05) differences across all the treatments on the volume and pressure of biogas. The pressure and volume of biogas when compared with the levels tested showed differences (P < 0.05) across all the treatments for the prediction of volume from pressure of biogas. The pressure and volume of gas produced in vitro increased (P < 0.05) and biogases decreased (P < 0.05) by the substrate treated with herbs and spices but for the drum stick leaves which was similar for the levels of concentration tested. This means that the level tested had a pronounced mitigation effect on pressure of biogas and volume of biogas produced. It was concluded that the herb and spice extracts have the potential to improve rumen fermentation and reduce the production of biogases in ruminant diet.

Green vegetation enrichment is a cost-effective technique for reducing atmospheric pollution. Fifteen common tropical plant species were assessed for identifying their air pollution tolerance, anticipated performance, and metal accumulation capacity at Jharia Coalfield and Reference (JCF) site using Air Pollution Tolerance Index (APTI), Anticipated Performance Index (API), and Metal Accumulation Index (MAI). Metal accumulation efficiencies were observed to be highest for Ficus benghalensis L. (12.67mg/kg) and Ficus religiosa L. (10.71 mg/kg). The values of APTI were found to be highest at JCF for F. benghalensis (APTI: 25.21 ± 0.95), F. religiosa (APTI: 23.02 ± 0.21), Alstonia scholaris (L.) R. Br. (APTI: 18.50 ± 0.43), Mangifera indica L. (APTI: 16.88 ± 0.65), Azadirachta indica A. Juss. (APTI: 15.87 ± 0.21), and Moringa oleifera Lam. (APTI: 16.32 ± 0.66). F. benghalensis and F. religiosa were found to be excellent performers to mitigate air pollution at JCF as per their API score. Values of MAI, APTI, and API were observed to be lowest at reference sites for all the studied plant species due to absence of any air polluting sources. The findings revealed that air pollution played a significant impact in influencing the biochemical and physiological parameters of plants in a contaminated coal mining area. The species with the maximum MAI and APTI values might be employed in developing a green belt to minimize the levels of pollutants into the atmosphere.

Cyanobacteria are microorganisms capable of releasing toxic metabolites in freshwater, deleterious to humans and other living organisms even in very low concentrations. Removing both cyanobacteria cells and their metabolites in conventional water treatment systems is still a challenge that needs to be addressed. This paper evaluated the use of Moringa oleifera saline extract and polyaluminum chloride (PACl) as coagulants in order to remove cells and metabolites of M. aeruginosa from water. Samples consisted of synthetic water spiked with humic acid and M. aeruginosa cells, with a final turbidity of 25 NTU. Coagulation/flocculation/dissolved air flotation (C/D/DAF) tests were performed with 50 mg/L of M. oleifera coagulant, combined with different proportions of PACl (10–50%). For removal of metabolites, 25 μg/L of microcystin and 50 ng/L of 2-MIB and geosmin were spiked in water samples. The best results were obtained with 70:30 M. oleifera:PACl, achieving removal efficiencies of 81.37%, 74.69%, and 71.06% for turbidity, color, and cell density, respectively. For microcystin, 2-MIB, and geosmin, after filtration (30 min), global removal efficiencies (clarification + filtration) of 99.45%, 62.37%, and 100%, respectively, were obtained, using Sand+GAC filter. The results suggest that the substitution of PACl by M. oleifera extract can be a good option to remove cyanobacteria cells from water, and high removal efficiencies of metabolites can be achieved after the complete proposed treatment.

This paper presents a literature review of the quality of greywater generated in different, especially developing, countries, constituents found in greywater, some treatment systems, natural materials for treatment, some reuse strategies and public perception regarding greywater reuse. The review shows that generation rates are mostly influenced by lifestyle, types of fixtures used and climatic conditions. Contaminants found in greywater are largely associated with the type of detergent used and influenced by other household practices. Many of the treatment systems reviewed were unable to provide total treatment as each system has its unique strength in removing a group of targeted pollutants. The review revealed that some naturally occurring materials such as Moringa oleifera, sawdust, can be used to remove targeted pollutants in greywater. The study further showed that user perceptions towards greywater treatment and reuse were only favourable towards non-potable purposes, mostly due to perceived contamination or lack of trust in the level of treatment offered by the treatment system.

The textile industries are characterized as one of the biggest consumers of potable water and chemical products throughout its process, being responsible for the elevated wastewater generation with intense coloration and wide polluting potential. In this context, the present study proposes the development and application of a new coagulant material for textile wastewater treatment. The proposed coagulant (α-Fe₂O₃-MO) was composed by hematite nanoparticles (α-Fe₂O₃) obtained by a simple non-pollutant methodology, associated with Moringa oleifera (MO) seeds saline extract compounds. Coagulation/flocculation (CF) efficiency was evaluated by removal of physicochemical parameters such as apparent color, turbidity, and compounds with absorption at UV₂₅₄ₙₘ (UV₂₅₄ₙₘ) through CF tests carried out on Jar test equipment and sedimentation carried out in the presence and absence of external magnetic field (600 k Am⁻¹). Kinetics sedimentation was from 0 to 90 min. The use of this new coagulant allowed the removal of 92.37% for apparent color, 91.43% for turbidity, and 46.09% for UV₂₅₄ₙₘ, indicating that the proposed coagulant association was efficient in the treatment of this type of wastewater under external magnetic field with only 10 min of sedimentation. In addition, the resulting sludge from CF process was tested as base material for a new coagulant synthesis, demonstrating great reuse potential. Therefore, the new proposed coagulant, composed of α-Fe₂O₃ and the compounds present in the seed extract of MO, has applicability for textile wastewater treatment demonstrating high removal rate for all evaluated parameters with cost reduction in the proposed treatment for this wastewater.

The main objective of the present paper is to evaluate the use of Moringa oleifera (MO) as a natural coagulant in coagulation/flocculation/sedimentation (CFS) followed by the microfiltration (MF) or nanofiltration (NF) process in dairy wastewater treatment, focusing on determining the best association of treatments that can generate wastewater for reuse purposes. The association of CFS-MF-NF treatments showed a high removal efficiency for chemical oxygen demand (COD) (mean of 96%), turbidity, and color (mean of 99%) meeting water reuse standards, allowing the reutilization of the wastewater, in relation to the analyzed parameters. The results indicate a lower membrane fouling rate (63%), an increase in permeate flow, and better quality of the permeate, proving that the CFS-MF-NF treatment is the most suitable among all the tested treatments. Finally, the treated wastewater obtained with this process presents better quality than the wastewater obtained with the conventional treatments.

This study aimed to evaluate the efficacy of using the byproduct of Moringa oleifera Lam. seeds as an adsorbent for removal of cadmium (Cd) from contaminated water. The material characterization was performed by scanning electron microscopy, infrared spectroscopy, and point of zero charge. The effects of the adsorbent mass, solution pH, contact time, and temperature were evaluated. In the preliminary studies, the mass of adsorbent (200–1200 mg) and pH conditions (5.0, 6.0, and 7.0) were varied. The time studies were performed at 20–180 min and the temperature studies at the range of 25–65 °C. The optimal conditions of adsorption obtained were 400 mg of adsorbent mass, 7.0 pH, and 160 min contact time with the adsorbent. The isotherms of adsorption were linearized according to Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) models. The results showed better fit by the Freundlich and D-R models for Cd adsorption, describing a multilayer adsorption and, according to the value of the sorption energy (E), it has chemical nature. The maximum capacity of adsorption (Q ₘ) obtained was 7.864 mg g⁻¹. For a comparative study, the activated carbon (P.A.) was used applying the same optimal conditions used in the adsorption isotherms and desorption process for the biosorbent, obtaining a Q ₘ as 32.884 mg g⁻¹. The average desorption percentage showed that adsorbents have strong interaction with the metal. Based on these results, it was concluded that the biosorbent was effective in remediation of solutions containing Cd and thus the use of this alternative material is a viable option, since it has low cost and it is a byproduct which has not undergone previous treatment.

Several coagulants/flocculants have been studied in order to remove the color and turbidity of raw water, employing natural ones demonstrated advantages in relation to chemicals. Moringa oleifera Lam is a natural polymer that has been gaining prominence in water treatment. It acts as a clarifying agent, providing a cationic protein that destabilizes the particles contained in a liquid medium. The main objective of the present work is to study the efficiency in terms of removing color and turbidity of raw water in order to obtain drinking water. For this purpose, different coagulant solutions were obtained utilizing three solutions of KCl in different concentrations (0.01, 0.1, and 1 M) and pure water combined with M. oleifera Lam seed. Each coagulant solution obtained was studied with concentrations ranging from 50 to 600 ppm of Moringa in solution. The pH was varied (4.0, 6.0, and 8.0) with 25% and 50% sodium hydroxide solution (NaOH) and hydrochloric acid (HCl), respectively. The tests were conducted with the “Jar Test Device” and the efficiency of the process was evaluated regarding the reduction of color and turbidity. The best results were found employing the coagulant solutions extracted with 1 M salt solution, pH 8.0, and different concentrations of coagulant solution. It is important to explain that the best results were in various concentration ranges, as the concentration of protein in solution becomes higher, the greater is its power as a coagulant. The lowest content of protein was found in the solution extracted with water, which consequently had the lowest values of color and turbidity removal.