In this work, Fe3O4-SiO2 nanoparticles were synthesized, characterized, and applied as adsorbent material to remove methyl blue stain from an aqueous solution. The prepared nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and Brunauer–Emmett–Teller (BET) to determine the physical surface properties and correlate them to the adsorption efficiency. In addition, this study investigated the influence of several parameters on the removal percentage and adsorption capacity. Specifically, this study investigated the impact of changing the following parameters: pH (1 – 8), agitation speed (Uspeed; 100 - 350 rpm), initial methyl blue (MB) concentration (1 - 100 mg/L), adsorbent dose (0.05 to 0.15 g), and contact time (10 - 100 min). The characterization study reveals that the prepared material has an excellent surface area (385 ± 5 m2/g) and pore volume (0.31 cm3/g) which enhances the adsorption capacity. In addition, the prepared material showed excellent efficiency where the removal percentage reached 99.0±1% at the optimal operating conditions and the maximum adsorption capacity was 40 mg/g. This study delivers a full elucidation of the adsorption of MB dye by Fe3O4-SiO2 NPs which considers a promising inexpensive adsorbent. It also delivers important insight information about the adsorption process and the influence of each parameter, which fill the lack in this field.

Significant attention has been given to nanotechnology as an emerging approach in water/wastewater treatment for heavy metals removal. Numerous research works on synthesizing, fabrication and upgrading nanoparticles have reported as an efficient adsorbent in removal of wide range of heavy metals from wastewater. This review intends to provide researchers with understanding and knowledge regarding the efficient nanoadsorbents, their adsorption mechanism towards selected heavy metals and fundamental principles of nanoadsorbent materials synthesis. In addition, further attention on the modification of nanoadsorbent and development of nanocomposites are highlighted in this paper as value added products to increase the adsorption capacity and enhance the heavy metals removal. Possible challenges and direction on utilization of nanocomposites for heavy metal removal in real wastewater effluent are discussed in view of their removal capability and cost efficiency. Future research works on developing a cost-effective way of nanocomposite production and toxicity testing of nanomaterials in wastewater applications are recommended. Further studies on the efficiency of the nanoadsorbents in pilot or industrial scale are highly needed to test the practicality of the nanoadsorbents for selected heavy metals removal from real wastewater.

Nanomaterials (NMs) are those tiny materials that range from 1-100 nm. These materials show different characteristics in their physical and chemical forms in comparison to their bulk form. The use of nanomaterials is increasing day by day because of their enormous capabilities in the health sector as well as in other industries. There are currently few, if any, actual protocols for the disposal and characterization of these nanomaterials, which results in environmental toxicity. Heavy use of chemicals in the testing of nanomaterials has resulted in polluting our entire ecosystem. Inconsistent results of nanomaterial show that it is challenging to reduce the toxicity generated by it. In this review, we discuss the administration and use of nanomaterials in the agribusiness sector, in food, and, most importantly, in the environment, for purposes of protecting our plants and crops, dealing with incurable diseases, developing new tastes and textures in the food sector, sensations, identifying pathogenic organisms, and distribution systems where these minute particles can wreak havoc. Despite the potential benefits of nanomaterials, their unintentional harm to the environment and, in some cases, our health is making further development difficult. This article discusses the toxicity of nanomaterials and how they damage our environment, as well as the obstacles that come with overcoming them.

Discharged carbon nanotubes (CNTs) likely interact with co-existing organic contaminants (OCs) and pose joint toxicity to environmental microbes. Herein, hydrophobic pentachlorophenol (PCP) and hydrophilic ciprofloxacin (CIP) were used as representative OCs and their joint toxicities with CNTs to Bacillus subtilis were systematically investigated at cellular, biochemical, and omics levels. The 3-h bacterial growth half inhibitory concentrations of CNTs, PCP, and CIP were 12.5 ± 2.6, 3.5 ± 0.5, and 0.46 ± 0.03 mg/L, respectively, and they all could damage cell membrane, increase intracellular oxidative stress, and alter bacterial metabolomics and transcriptomics; while CNTs-PCP and CNTs-CIP binary exposures exhibited distinct additive and synergistic toxicities, respectively. CNTs increased bacterial bioaccumulation of PCP and CIP via destabilizing and damaging cell membrane. PCP reduced the bioaccumulation of CNTs, while CIP had no significant effect; this difference could be owing to the different effects of the two OCs on cell-surface hydrophobicity and CNTs electronegativity. The additive toxicity outcome upon CNTs-PCP co-exposure could be a result of the balance between the increased toxicity from increased PCP bioaccumulation and the decreased toxicity from decreased CNTs bioaccumulation. The increased bioaccumulation of CIP contributed to the synergistic toxicity upon CNTs-CIP co-exposure, as confirmed by the increased inhibition of topoisomerase Ⅳ activity and interference in gene expressions regulating ABC transporters and lysine biosynthesis. The findings provide novel insights into environmental risks of CNTs.

Hyperbranched polymers are nanomaterials belonging to the class of dendritic architectures with increasing applications in many diverse fields. We studied the toxicity of two hyperbranched polymers to the freshwater crustacean Daphnia magna. A hyperbranched hydroxyl-terminated polyester and a commercial hyperbranched polyamidoamine, Helux-3316 were tested for the acute immobilization of daphnids, the overproduction of reactive oxygen species and the activity of the antioxidant enzymes catalase and glutathione S-transferase. The effect for D. magna immobilization was higher for the hyperbranched polyamidoamine Helux-3316, which was attributed to the presence of primary amino groups on its surface. Following exposure to both hyperbranched polymers, a clear overproduction of reactive oxygen species took place accompanied by concentration-dependent enzymatic antioxidant response. Our results showed that the overproduction of reactive oxygen species activated antioxidant defence mechanisms and was responsible for the immobilization of daphnids exposed to both hyperbranched polymers. We showed evidence of the uptake of fluorescently labelled Helux-3316 that accumulated into the gastrointestinal tract of D. magna, and its removal via excretion within fecal pellets. This is the first work reporting the internalization of hyperbranched polymers in aquatic organisms.

Reduced graphene oxide (rGO) is one of the most widely used carbon nanomaterials. When it is released into the environment, rGO can markedly affect the transformation of many pollutants, and change their fate and risk. In this work, the synergetic effects of rGO and Cu(II) on the oxidation of 2-naphthol were examined in water in the dark. It was found that the coexistence of rGO and Cu(II) significantly promoted the oxidation of 2-naphthol. Corresponding products were identified as the coupling oligomers of 2-naphthol (dimer, trimer and tetramer) and hydroxylated compounds (OH-2-naphthol, OH-dimer, di–OH–dimer and naphthoquinone derivatives). In the oxidation reaction, rGO played dual roles, i.e. adsorbent and electron-transfer mediator. rGO firstly adsorbed Cu(II) and 2-naphthol on its surface, and then transferred electrons from 2-naphthol to Cu(II) to yield 2-naphthol radicals and Cu(I). 2-Naphthol radicals coupled to each other to form different oligomers of 2-naphthol. Cu(I) was re-oxidized back to Cu(II) by dissolved oxygen, which sustained the continuous oxidation of 2-naphthol. During the autoxidation of Cu(I), reactive oxygen species were generated, which further reacted with 2-naphthol to form hydroxylated products. These findings provide new insights into the risk assessment of rGO and 2-naphthol in aquatic environments.

Nickel nanoparticles (NiNPs) have an estimated production of ca. 20 tons per year in the US. Nickel has been risk-assessed for long in Europe, but not NiNPs, hence the concern for the environment. In the present study, we focused on investigating the mechanisms of toxicity of NiNPs and the comparison to NiNO3. The high-throughput microarray for the soil ecotox model Enchytraeus crypticus (Oligochaeta) was used. To anchor gene to phenotype effect level, organisms were exposed to reproduction effect concentrations EC20 and EC50, for 3 and 7 days. Results showed commonly affected pathways between NiNPs and NiNO3, including increase in proteolysis, apoptosis and inflammatory response, and interference with the nervous system. Mechanisms unique to NiNO3 were also observed (e.g. glutathione synthesis). No specific mechanisms for NiNPs were found, which could indicate that longer exposure period (>7 days) is required to capture the peak response to NiNPs. A mechanisms scheme is assembled, showing both common and unique mechanisms to NiNO3 and NiNPs, providing an important framework for further, more targeted, studies.

Agricultural soil is one of the main sink for both heavy metals and nanomaterials (NMs). Whether NMs can impact heavy metals uptake or bioaccumulation in plants is unknown. Here, cucumber plants were cultivated in a multi-heavy metals contaminated soil amended with four types of NMs (SiO2, TiO2, ZnS and MoS2) separately for four weeks. Physiological and biochemical parameters were determined to investigate the impact of NMs on plant growth. Inductively coupled plasma mass spectrometry was employed to determine the metal content in plants. Results showed that none of the tested NMs impacted plants biomass, but all the NMs showed different degrees of reduction in heavy metals bioaccumulation in plant roots, stems and leaves. However, four NMs showed different degrees of reduction in macro and micro nutrients uptake. MoS2 decreased the bioaccumulation of heavy metals (As, Cd, Cr, Cu, Ni, Al, Ti and Pb) for 36.4–60.6% and nutrients (Mg, Fe, K, Si and Mn) for 40.1%–50.1% in roots. Exposure to MoS2 NMs also significantly increased 23.4% of Si in leaves, 205.6% and 83.9% of Mo in roots and stems, respectively. In general, the results of this study showed promising potential for NMs to reduce uptake of heavy metals in crop plants, especially MoS2 NMs. However, the negative impacts of perturbing nutrients uptake should be paid attention as well.

This study aimed at evaluating the interactive effects of acetaminophen (AC; 400 mg kg−1) and silicon dioxide nanomaterial (nano-SiO2;3 mg kg−1) on soil-grown barley. After 14 days of growth, plant growth, evaluated in terms of fresh and dry weight, was greatly inhibited by AC, independently of being or not co-treated with nano-SiO2. Plants growing under high levels of AC did not show any increase in malondialdehyde (MDA) nor thiols contents, though levels of superoxide anion (O2.-) and hydrogen peroxide (H2O2) were increased in leaves and roots, respectively. When plants were co-treated with nano-SiO2, reactive oxygen species (ROS) content remained unchanged, but lipid peroxidation (LP) was diminished and the thiol redox network was up-regulated in roots. The evaluation of the response of the antioxidant system showed that AC affected both non-enzymatic and enzymatic components in an organ-specific manner: proline levels and superoxide dismutase (SOD) activity were enhanced, whilst catalase (CAT) activity decreased in leaves; ascorbate content and CAT activity were diminished in roots. In response to the nano-SiO2 co-treatment, this pattern was not vastly altered, despite for ascorbate peroxidase (APX), whose activity was greatly enhanced in both organs. Overall, combining biometric, biochemical and molecular approaches, this study revealed that, although AC impaired plant growth and development, it did not trigger a harsh oxidative stress condition. Maybe by this reason, the ameliorating potential of nano-SiO2 was not so evident; yet, nano-SiO2 was able to reduce LP and to stimulate thiol content and APX activity, possibly as a defense mechanism against AC-induced stress.

Oil pollution of waters is one of the most serious environmental problems globally. The long half-life and persistence within the environment makes oil particularly toxic and difficult to remediate. There is a significant need for efficient and cost-effective oil recovery technologies to be brought in to practice. In this study, we developed a facile and efficient magnetic separation method. The surface of 316L stainless steel nanoparticles was modified by plasma deposition of 1,7-octadiene and perfluorooctane, producing relatively hydrophobic coatings having water contact angles of 86 and 100°, respectively. Both coatings had high oil removal efficiency (ORE) of >99%. The captured oil could be easily separated by applying an external magnetic force. The ease of material preparation and separation from the water after the oil is captured, and its high ORE is a compelling argument for further development and optimization of the technology to possible utilization into practice. Furthermore, the capacity of plasma polymerization to deliver desired surface properties can extend the application of the technology to removing other chemical and biological contaminants from polluted waters.