In this work, Fe3O4-SiO2 nanoparticles were synthesized, characterized, and applied as adsorbent material to remove methyl blue stain from an aqueous solution. The prepared nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and Brunauer–Emmett–Teller (BET) to determine the physical surface properties and correlate them to the adsorption efficiency. In addition, this study investigated the influence of several parameters on the removal percentage and adsorption capacity. Specifically, this study investigated the impact of changing the following parameters: pH (1 – 8), agitation speed (Uspeed; 100 - 350 rpm), initial methyl blue (MB) concentration (1 - 100 mg/L), adsorbent dose (0.05 to 0.15 g), and contact time (10 - 100 min). The characterization study reveals that the prepared material has an excellent surface area (385 ± 5 m2/g) and pore volume (0.31 cm3/g) which enhances the adsorption capacity. In addition, the prepared material showed excellent efficiency where the removal percentage reached 99.0±1% at the optimal operating conditions and the maximum adsorption capacity was 40 mg/g. This study delivers a full elucidation of the adsorption of MB dye by Fe3O4-SiO2 NPs which considers a promising inexpensive adsorbent. It also delivers important insight information about the adsorption process and the influence of each parameter, which fill the lack in this field.

Nanomaterials (NMs) are those tiny materials that range from 1-100 nm. These materials show different characteristics in their physical and chemical forms in comparison to their bulk form. The use of nanomaterials is increasing day by day because of their enormous capabilities in the health sector as well as in other industries. There are currently few, if any, actual protocols for the disposal and characterization of these nanomaterials, which results in environmental toxicity. Heavy use of chemicals in the testing of nanomaterials has resulted in polluting our entire ecosystem. Inconsistent results of nanomaterial show that it is challenging to reduce the toxicity generated by it. In this review, we discuss the administration and use of nanomaterials in the agribusiness sector, in food, and, most importantly, in the environment, for purposes of protecting our plants and crops, dealing with incurable diseases, developing new tastes and textures in the food sector, sensations, identifying pathogenic organisms, and distribution systems where these minute particles can wreak havoc. Despite the potential benefits of nanomaterials, their unintentional harm to the environment and, in some cases, our health is making further development difficult. This article discusses the toxicity of nanomaterials and how they damage our environment, as well as the obstacles that come with overcoming them.

Nanotechnology is a rapidly developing technology that will have a significant impact on product development in the next few years. The technology is already being employed in cutting-edge cosmetic and healthcare products. Nanotechnology and nanoparticles have a strong potential for product and process innovation in the food industrial sector. This is already being demonstrated by food product availability made using nanotechnology. Nanotechnologies will have an impact on food security, packaging materials, delivery systems, bioavailability, and new disease detection materials in the food production chain, contributing to the UN Millennium Development Goals targets. Food products using nanoparticles are already gaining traction into the market, with an emphasis on online sales. This means that pre- and post-marketing regulatory frameworks and risk assessments must meet certain standards. There are potential advantages of nanotechnologies for agriculture, consumers and the food industry at large as they are with other new and growing technologies. However, little is understood about the safety implications of applying nanotechnologies to agriculture and incorporating nanoparticles into food. As a result, policymakers and scientists must move quickly, as regulatory systems appear to require change, and scientists should contribute to these adaptations. Their combined efforts should make it easier to reduce health and environmental impacts while also promoting the economic growth of nanotechnologies in the food supply chain. This review highlighted the benefits of a number of nano enabled agrochemicals/materials, the potential health impacts as well as the risk assessment and risk management for nanoparticles in the agriculture and food production chain.

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Despite arsenic (As) bioavailability being highly correlated with water status and the presence of iron (Fe) minerals, limited information is currently available on how externally applied Fe nanomaterials in soil-rice systems affect As oxidation and stabilization during flooding and draining events. Herein, the stabilization of As in a paddy soil by a phytosynthesized iron oxide nanomaterials (PION) and the related mechanism was investigated using a combination of chemical extraction and functional microbe analysis in soil at both flooding (60 d) and draining (120 d) stages. The application of PION decreased both specifically bound and non-specifically bound As. The As content in rice root, stem, husk and grain was reduced by 78.5, 17.3, 8.4 and 34.4%, respectively, whereas As(III) and As(V) in root declined by 96.9 and 33.3% for the 1% PION treatment after 120 d. Furthermore, the 1% PION treatment decreased the ratio of As(III)/As(V) in the rhizosphere soil, root and stem. Although PION had no significant effect on the overall Shannon index, the distribution of some specific functional microbes changed dramatically. While no As(III) oxidation bacteria were found at 60 d in any treatments, PION treatment increased As(III) oxidation bacteria by 3–9 fold after 120 d cultivation. Structural equation model analysis revealed that the ratio of Fe(III)/Fe(II) affected As stabilization directly at the flooding stage, whereas nitrate reduction and As(III) oxidation microbial groups played a significant role in the stabilization of As at the draining stage. These results highlight that PION exhibits a robust ability to reduce As availability to rice, with chemical oxidation, reduction inhibition and adsorption dominating at the flooding stage, while microbial oxidation, adsorption and coprecipitation dominant during draining.

As non-biological molecules, molecular imprinted polymers (MIPs) can be made as antibody mimics for the development of luminescence sensors for various targets. The combination of MIPs with nanomaterials is further recognized as a useful option to improve the sensitivity of luminescence sensors. In this work, the recent progresses made in the fabrication of fluorescence, phosphorescence, chemiluminescence, and electrochemiluminescence sensors based on such combination have been reviewed with emphasis on the detection of pesticides/herbicides. Accordingly, the materials that are most feasible for the detection of such targets are recommended based on the MIP technologies.

Titanium-based nanomaterials co-doped with terbium (Tb) and sulfur (S) were synthesized by sol–gel method via a facile step. Physicochemical properties of the resulting composites were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), X-ray photo-electron spectroscopy (XPS) and UV–Vis diffused reflectance spectroscopy (DRS). Methylene blue (MB) was used as a degradation target for evaluating the photocatalytic performance. The factors which influence the photocatalytic activity were investigated, including calcined temperatures and S doping amount. Tb, S (2 wt%) co-doped TiO₂ composite calcined at 500 °C exhibited the highest photocatalytic activity with a degradation rate of 72.4% in 3 h. The reaction constant was 0.11529, 0.26025, 0.35038 and 0.41462 h⁻¹ for undoped TiO₂, Tb-doped TiO₂, S-doped TiO₂ and Tb, S co-doped TiO₂, respectively. Importantly, the synergistic effect of terbium and sulfur dopants was profoundly discussed. Furthermore, recycling tests and acute toxicity experiments were carried out to confirm the reusability and biosafety of Tb, S co-doped TiO₂.

Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.

In this study, highly efficient Fe/Bi bimetallic magnetic nanooxides (IBBMNOs) were used as adsorbent for the removal of Cr(VI) from an aqueous environment. The IBBMNOs were synthesized by a simple and facile chemical reduction method. After that, different analytical techniques were used to characterize the resultant nanomaterial. According to characterization results, the IBBMNOs are highly porous look like cotton beads with an average size of 60–69 nm. BET results show that IBBMNOs are highly porous with a high surface area. After optimizing different parameters such as pH, adsorbent dose, and time study, an excellent adsorption capacity was achieved up to 185 mg/g in 10 min. The calculated data of the adsorption process was well fitted with Langmuir and pseudo-first-order kinetic model. The prepared materials have good usability as compared to reported adsorbent materials can be used for five different cycles with good removal efficiency of chromium ion from aqueous samples. Schematic illustration of adsorption of Cr(VI) from aqueous solution by IBBMNOs

The novel quaternary CNT/TiO₂/WO₃/CdS nanostructure was fabricated to be employed in the photocatalytic degradation of reactive blue 19 (RB19) under the visible light irradiation. The physicochemical properties of the pure TiO₂, CNT/TiO₂, CNT/TiO₂/WO₃, and CNT/TiO₂/WO₃/CdS were characterized using XRD, FTIR, FESEM, EDX, DRS, PL, and BET analyses. The photodegradation results showed that the optimum weight percentage of CNT, WO₃, and CdS was 4%, 35%, and 5%, respectively. The highest RB19 degradation efficiency of CNT/TiO₂/WO₃/CdS was achieved 97%. Besides, the central composite design was applied to model and optimize the photocatalytic activity of CNT/TiO₂/WO₃/CdS nanocatalyst and assess the effects of processing variables including RB19 concentration, catalyst concentration, pH, and irradiation time on the response. RB19 concentration and pH had the most and the second most significant role in the removal efficiency. While increasing the catalyst concentration and irradiation time positively enhanced the removal efficiency to more than 82%, increasing the pH and dye concentration showed the remarkable hindering effects on the removal efficiency by about 45% reduction. The reusability of the synthesized catalysts was studied under the optimum conditions as follows: [RB19] = 25 mg/L, [catalyst] = 1 g/L, pH of 4, and irradiation time = 2 h. The COD and TOC analyses were also conducted during photodegradation process. The COD and TOC removal efficiencies were achieved about 67% and 62%, respectively.