This study determined the contamination levels of oil and grease (O/G) across nine (9) galamsey operations under different environmental media (background soil, surface drainage, slurry/sludge and galamsey wastes) in three galamsey hotspot assemblies (Tarkwa Nsuaem, Amenfi East and Prestea Huni Valley) within the Western region of Ghana. Triplicate samples each of the four environmental media for the nine galamsey types (Washing Board, Washing Plant, Anwona, Dig and Wash, Dredging, Underground Abandoned Shaft, Underground Sample Pit, Chamfi and Mill House) were collected and analysed using n-hexane extractable materials in acidic medium by extraction and gravimetry to determine O/G concentrations. From the comparison of mean ranked concentration of O/G, using Kruskal-Wallis Test, the observed differences in the ranking was significant across all four media. The O/G concentrations for Anwona, Chamfi, Mill House, Washing Board and Washing Plant galamsey recorded exceedances when compared to the Ghana EPA Effluent Guideline Value of 100 mg/L for water and The New Dutch Lists’ Target and Intervention Value of 50 mg/kg and 500 mg/kg for solid/semi-solid materials. Consistently and for all environmental media types, the levels of O/G across the galamsey types were in the descending order of: Washing Board, Chamfi, Anwona, Mill House, Washing Plant, Underground Sample Pit, River Dredging, Dig and Wash, Underground Abandoned Shaft and Control Sample (non-galamseyed areas). In general, the surface drainage medium was predominantly found to be the most impacted upon medium from hydrocarbons by seven of the nine galamsey operations (Washing Board, Anwona, Chamfi, Mill House, Dredging, Dig and Wash and Underground Sample Pit). This was followed by slurry/sludge, background soil and waste media in that order. Expectedly, there were no exceedances for the Reference or Control Samples (non-galamseyed areas).

Urban parks are an important part of the urban ecological environment. The environmental quality of parks is related to human health. To evaluate sources of polycyclic aromatic hydrocarbons (PAHs) in soils of urban parks and their possible health risks, soil samples from 122 parks in Beijing, China, were collected and analyzed. The total content of 16 PAHs between 0.066 and 6.867 mg/kg. Four-ring PAHs were predominant, followed by 5-ring PAHs, while the fraction of 2-ring PAHs was the lowest. The dominant PAHs sources were found to be coal combustion and oil fuels such as gasoline and diesel. A conditional inference tree (CIT) was used to identify the key influencing factors for PAHs. Traffic emissions was the most important factor, followed by coal consumption, as well as the history and location of the park. Incremental lifetime cancer risk (ILCR) for urban park soil in Beijing were low under normal conditions. The soil PAHs exposure pathway risk for both children and adults decreased in the following order: ingestion > dermal contact > inhalation. The risk from soil in parks to children’s health is slightly higher than that of adults, although the health risk due to exposure to PAHs was not extraordinary. Ecosystem risk was negligible.

Following the 16TAN Husky oil spill along the North Saskatchewan River (NSR), the occurrence and natural attenuation of the petroleum hydrocarbons were assessed by analyzing the littoral zone sediments/oil debris collected from July 2016 to October 2017. Husky oil-free, mixed sediment-Husky oil, and Husky oil debris samples were identified for all the collected samples. Shoreline sediments were contaminated by mixed biogenic, pyrogenic and petrogenic inputs prior to the spill. Oil stranded on the shoreline of NSR was moved or buried due to the very dynamic conditions of the shoreline, or cleaned through a series of cleanup activities after the spill. Most normal alkanes were naturally weathered, whereas most of the branched alkanes and all of the saturated petroleum biomarkers remained. Some lighter molecular weight (e.g., 2 to 3-ring) polycyclic aromatic hydrocarbons (PAHs) were lost rapidly after the spill, whereas sulfur containing components, e.g., dibenzothiophenes and benzonaphthothiiophenes, and those having a heavier molecular weight did not change markedly even 15 months post-spill. Similarly, some light hydrocarbons (e.g., <C₁₀) were lost over the first kilometers from the point of entry (POE), while heavier hydrocarbons did not show any major differences away from the POE. Very large inter-site and inter-survey discrepancies were found for samples. Evaporation into the air and dissolution into water, combined with biodegradation, were together or independently the main contributors to the loss of the light molecular hydrocarbons.

Marine oil spill often causes contamination of drinking water sources in coastal areas. As the use of oil dispersants has become one of the main practices in remediation of oil spill, the effect of oil dispersants on the treatment effectiveness remains unexplored. Specifically, little is known on the removal of dispersed oil from contaminated water using conventional adsorbents. This study investigated sorption behavior of three prototype activated charcoals (ACs) of different particle sizes (4–12, 12–20 and 100 mesh) for removal of dispersed oil hydrocarbons, and effects of two model oil dispersants (Corexit EC9500A and Corexit EC9527A). The oil content was measured as n-alkanes, polycyclic aromatic hydrocarbons (PAHs), and total petroleum hydrocarbons (TPHs). Characterization results showed that the smallest AC (PAC100) offered the highest BET surface area of 889 m2/g and pore volume of 0.95 cm3/g (pHPZC = 6.1). Sorption kinetic data revealed that all three ACs can efficiently adsorb Corexit EC9500A and oil dispersed by the two dispersants (DWAO-I and DWAO-II), and the adsorption capacity followed the trend: PAC100 > GAC12 × 20 > GAC4 × 12. Sorption isotherms confirmed PAC100 showed the highest adsorption capacity for dispersed oil in DWAO-I with a Freundlich KF value of 10.90 mg/g∙(L/mg)1/n (n = 1.38). Furthermore, the presence of Corexit EC9500A showed two contrasting effects on the oil sorption, i.e., adsolubilization and solubilization depending on the dispersant concentration. Increasing solution pH from 6.0 to 9.0 and salinity from 2 to 8 wt% showed only modest effect on the sorption. The results are useful for effective treatment of dispersed oil in contaminated water and for understanding roles of oil dispersants.

Polycyclic aromatic compounds (PACs) are ubiquitous in the environment. Wildlife (including fish) are chronically exposed to PACs through air, water, sediment, soil, and/or dietary routes. Exposures are highest near industrial or urban sites, such as aluminum smelters and oil sands mines, or near natural sources such as forest fires. This review assesses the exposure and toxicity of PACs to wildlife, with a focus on the Canadian environment. Most published field studies measured PAC concentrations in tissues of invertebrates, fish, and birds, with fewer studies of amphibians and mammals. In general, PAC concentrations measured in Canadian wildlife tissues were under the benzo[a]pyrene (BaP) guideline for human consumption. Health effects of PAC exposure include embryotoxicity, deformities, cardiotoxicity, DNA damage, changes to DNA methylation, oxidative stress, endocrine disruption, and impaired reproduction. Much of the toxicity of PACs can be attributed to their bioavailability, and the extent to which certain PACs are transformed into more toxic metabolites by cytochrome P450 enzymes. As most mechanistic studies are limited to individual polycyclic aromatic hydrocarbons (PAHs), particularly BaP, research on other PACs and PAC-containing complex mixtures is required to understand the environmental significance of PAC exposure and toxicity. Additional work on responses to PACs in amphibians, reptiles, and semi-aquatic mammals, and development of molecular markers for early detection of biological responses to PACs would provide a stronger biological and ecological justification for regulating PAC emissions to protect Canadian wildlife.

Oil spills can result in changes in chemical contaminant concentrations along coastlines. When concentrations are measured along the Gulf of Mexico over time, this information can be used to evaluate oil spill shoreline exposure dates. The objective of this research was to identify more accurate oil exposure dates based on oil spill chemical concentrations changes (CCC) within sediments in coastal zones after oil spills. The results could be used to help improve oil transport models and to improve estimates of oil landings within the nearshore. The CCC method was based on separating the target coastal zone into segments and then documenting the timing of large increases in concentration for specific oil spill chemicals (OSCs) within each segment. The dataset from the Deepwater Horizon (DWH) oil spill was used to illustrate the application of the method. Some differences in exposure dates were observed between the CCC method and between oil spill trajectories. Differences may have been caused by mixing at the freshwater and sea water interface, nearshore circulation features, and the possible influence of submerged oil that is unaccounted for by oil spill trajectories. Overall, this research highlights the benefit of using an integrated approach to confirm the timing of shoreline exposure.

In this study, the Songgang River (SR) was selected as a typical tributary that is heavily polluted by rapid urbanization and industrialization. The polycyclic aromatic hydrocarbon (PAH) distribution at five representative sampling sites from different urban functional areas was studied. The chemical and physical properties and spatial and vertical distribution of PAHs in sediments were investigated. PAH source identification and the ecological risks of the sediments were evaluated. The results suggested that the industrial zone and dense residential and commercial areas were the most contaminated areas of the SR, as the chemical and physical properties of total organic carbon content in sediments was the highest at the dense residential and commercial areas (0.1–4.5%); however, the acid volatile sulfide, total nitrogen, and total phosphorus contents were the highest in the industrial zone, with ranges of 700.0–1618.4 mg/kg dw, 22.4–3543.9 mg/kg dw, and 82.3–4550.7 mg/kg dw, respectively. The spatial distribution of residual PAHs in the sediment cores showed a wide variation among different urban functional areas, and the vertical characterization (0–300 cm) depicted a significant decreasing trend with depth and with an abrupt increase at 180 cm. The concentration of ∑16 PAHs ranged from 208.7 to 7709.8 ng/g dw, with the highest concentrations obtained in the industrial zone. The low molecular weight-PAHs (153–6720 ng/g dw) were predominant in the sediments. Furthermore, there were combined sources (biomass burning: 40.3%; fossil fuel combustion: 25.5%; mixed source: 21.5%; oil pollution: 12.7%) and a long term accumulation effect, with anthropogenic activities and industrial pollution as the major contributing sources. The concentrations of Nap, Acy, Ace, Flu, and Ant exceeded the lower limit of the sediment quality criteria, and higher toxic equivalent concentration values of the total carcinogenic PAHs were observed nearby the midstream of the SR, which may cause adverse biological effects and implies a need for regular monitoring.

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography – flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ¹³C, δ²H) and radiocarbon (Δ¹⁴C) isotope analysis are considered. Using as an example research carried out in Canada’s Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.

Nonylphenol (NP) is a chemical raw material and intermediate which is mainly used in the production of surfactants, lubricating oil additives and pesticide emulsifiers. NP is reported to be toxic on the immune system, nervous system and reproductive system due to its binding to estrogen receptors. However, the toxicity of NP on mammalian oocyte quality remains unclear. In present study, we explored the effects of NP exposure on mouse oocyte maturation. Our results showed that 4 weeks of NP exposure increased the number of atresia follicles and decreased oocyte developmental competence. Transcriptomic analysis indicated that NP exposure altered the expression of more than 800 genes in oocytes, including multiple biological pathways. Subcellular structure examination indicated that NP exposure disrupted meiotic spindle organization and caused chromosome misalignment. Moreover, aberrant mitochondrial distribution and decreased membrane potential were also observed, indicating that NP exposure caused mitochondria dysfunction. Further analysis showed that NP exposure resulted in the accumulation of reactive oxygen species (ROS), which causes oxidative stress; and the NP-exposed oocytes showed positive Annexin-V signal, indicating the occurrence of early apoptosis. In summary, our results indicated that NP exposure reduced oocyte quality by affecting cytoskeletal dynamics and mitochondrial function, which further induced oxidative stress and apoptosis in mice.

Sediment quality monitoring is commonly used to assess for river pollution by industrial activities, but requires knowledge of pre-disturbance conditions. This has long been a critical knowledge gap for assessing pollution of the Lower Athabasca River within the Athabasca Oil Sands Region (AOSR) because sediment quality monitoring started 30 years after mining operations began in 1967. Here, we analyze oil-sands pollution indicator metals vanadium (V) and nickel (Ni) in sediment cores from five Athabasca River floodplain lakes spanning from 17 km upstream to 58 km downstream of central oil sands operations. These data are used to define pre-development baseline (i.e., reference) concentrations and assess for enrichment in sediment deposited after 1967. Measurements of organic and inorganic matter content were used to differentiate periods of strong and weaker Athabasca River influence in the sediment records, as needed to discern pathways of metal deposition. Numerical analyses reveal that post-1967 V and Ni enrichment factors have remained below the 1.5 threshold for ‘minimal enrichment’ (sensu Birch, 2017) in stratigraphic intervals of strong river influence in the floodplain lakes. Thus, concentrations of V and Ni carried by Athabasca River sediment have not become measurably enriched since onset of oil sands development, as demonstrated by our before-after study design with >99.99% power to detect a 10% increase above pre-development baselines. At the closest lake (<1 km) to oil sands operations, however, enrichment factors for V and Ni increased to 2.1 and 1.5, respectively, in the mid-1980s and have remained at this level when river influence was weaker, indicating contamination via atmospheric transport. Localized enrichment within the oil sands region via atmospheric pathways is a greater concern for ecosystems and society than local and far-field transport by fluvial pathways.