Refine search
Results 1-3 of 3
Evaluation of Halloysite Nanotube–Loaded Chitosan-Based Nanocomposite Membranes for Water Desalination by Pervaporation
2022
Ünügül, Tuba | Nigiz, Filiz Ugur
In this study, halloysite nanotube (HNT)–loaded chitosan-based nanocomposite membranes were synthesized and used for pervaporative desalination of water. Structural and morphological properties of the nanocomposite membranes were investigated. The effects of the HNT content, feed temperature, and feed NaCl concentration on the flux and salt rejection were investigated. As the HNT content was increased, the degree of swelling decreased. At all temperature values, higher than 99% of salt rejections were achieved. The flux value increased from 1.63 to 4.89 kg/m²h, when the HNT content increased from 0 to 20 wt% at 30 °C. While the highest salt rejection value was obtained as 99.90% using the 10 wt% HNT-loaded nanocomposite membrane, the highest flux value was obtained as 5.81 kg/m²h using the 20 wt% HNT-loaded membrane at 50 °C. The pervaporation desalination results showed that HNT simultaneously increased the swelling resistance and the separation capability of the chitosan membrane.
Show more [+] Less [-]Novel green PVA-fullerenol mixed matrix supported membranes for separating water-THF mixtures by pervaporation
2018
Penkova, Anastasia V. | Dmitrenko, Maria E. | Ermakov, Sergey S. | Toikka, Alexander M. | Roizard, Denis
This study focuses first on the preparation of mixed matrix supported membranes of polyvinyl alcohol (PVA) and low-hydroxylated fullerenol C₆₀(OH)₁₂ used to create water selective membranes and then on their pervaporation properties for the separation of water-THF mixtures. These novel supported PVA membranes containing nano-carbon particles were prepared to reach high membrane performance for further integration in a dehydration process, such as distillation coupled to pervaporation. The separation of water-THF mixtures was performed with the supported membranes over a wide range of water concentrations in the feed mixture, i.e., from the azeotrope range up to 30 wt%, to evaluate the performance and stability of the thin active layer. SEM was used to visualize the internal morphology of the membrane. The influence of temperature on the transport properties was also investigated. All the membranes were highly water selective and stable up to 30 wt% water in the feed. The best compromise of transport properties was obtained for the C₆₀(OH)₁₂(5%)-PVA supported composite membrane: a permeate enrichment of 99.3 ± 0.3 wt% water and a flux of 0.25 ± 0.02 kg/(m² h) for the separation of a mixture containing 5.7 wt% water and 94.3 wt% tetrahydrofuran (THF) at 30 °C. Considering its water stability, this supported membrane with a dense layer thinner than 2 μm appears promising for use in hybrid industrial processes to upgrade solvents with a smaller environmental footprint than conventional methods.
Show more [+] Less [-]Organic solvent removal by pervaporation membrane technology: experimental and simulation
2018
Rezakazemi, Mashallah | Marjani, Azam | Shirazian, Saeed
This work presents purification of cyclohexane using polydimethylsiloxane (PDMS) membranes in pervaporation (PV) process. The PDMS is a rubbery polymer and appropriate as membrane material for purification of cyclohexane. PV which is a low-energy separation process was chosen for purification of cyclohexane due to its superior advantages compared to other processes. Effect of feed concentration on separation factor was investigated in order to optimize the process. It was indicated that dehydration of 80 wt% cyclohexane mixture at a temperature of 300 K and a vacuum pressure of 10 mmHg could be effectively achieved and high separation factor of 2500 was obtained. Furthermore, a two-dimensional mechanistic model was proposed for predicting mass transfer of cyclohexane in the process. The mechanistic model accounts for mass transfer of cyclohexane across the membrane, and concentration distribution of cyclohexane was determined. It was revealed that the most mass transfer flux of cyclohexane occur at the region near the inlet of feed channel, while the flux at the upper side of the module reaches zero value due to the effect of velocity distribution on the convective mass transfer of cyclohexane.
Show more [+] Less [-]